Full Pint: Brew Supplies

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I'll look after the grain from the last buy, if you need to find it a home and all...
Happy to help.
 
Bridges said:
I'll look after the grain from the last buy, if you need to find it a home and all...
Happy to help.
I'm guessing by "look after", you mean "mill and brew", right? ;)
 
Mark. Rob Pogue will be picking my grain and mill up. Thought I better let you know as he doesn't look very trustworthy
 
Hmm I tried to reply in the full pint bulk buy thread and now I can't see it
 
takai said:
Is it too late to get some extra grain to pickup in the bb pickup?
Depends on what you're after, mate.

If it's full sacks - they will need to be the full sacks offered in the new full sacks section - at those prices.
The bulk buy with bulk buy prices has finished, but we can probably accommodate you with a standard order.
 
Spiesy said:
Depends on what you're after, mate.

If it's full sacks - they will need to be the full sacks offered in the new full sacks section - at those prices.
The bulk buy with bulk buy prices has finished, but we can probably accommodate you with a standard order.
All sorted with Andrew :)

I remembered i had this thing called a phone that i could pick up and speak to someone.... magic!
 
Spiesy said:
I'm guessing by "look after", you mean "mill and brew", right? ;)
I'll give you a few of the beers I make if it helps.
 
Just posted in the bb thread but my question has been answered. As you were

See you tomorrow
 
Thanks to FP for running the BB, brewing with my newly acquired grain right now

Also bloody stoked with my new grain bag, so much better than my old ones & much bigger so gives me the ability to do double batches easily!

Here it is in action brewing a SNPA

ImageUploadedByAussie Home Brewer1434250794.052697.jpg

Cheers!
 
I'm anxiously anticipating the restocking of the probe thermowell and 3 piece ball lock valve, so that I can finish my first HERMS setup. Any idea when I can expect those wish list items to arrive?

I've been holding off on ordering my next few brews ingredients so that I can order / pick them up all at once. Thanks again FP!
 
I don't know if it's the old timers catching up but I remember you guys having a 500mm sight glass listed on your sight. Am I wrong or are you out of stock, the only one I can find online in that size is from the states and with postage it's a bit of a ding in the old piggy bank. I'm just getting a little tired of the over under by a litre or 2, or yesterdays 6 litres ( I was a few beers in at sparge time :ph34r: ).

thanks
MB
 
sharpcliff said:
I'm anxiously anticipating the restocking of the probe thermowell and 3 piece ball lock valve, so that I can finish my first HERMS setup. Any idea when I can expect those wish list items to arrive?

I've been holding off on ordering my next few brews ingredients so that I can order / pick them up all at once. Thanks again FP!
We're sorry to say that we will not be stocking HERM-IT range due to a problem with the supplier.
 
MastersBrewery said:
I don't know if it's the old timers catching up but I remember you guys having a 500mm sight glass listed on your sight. Am I wrong or are you out of stock, the only one I can find online in that size is from the states and with postage it's a bit of a ding in the old piggy bank. I'm just getting a little tired of the over under by a litre or 2, or yesterdays 6 litres ( I was a few beers in at sparge time :ph34r: ).

thanks
MB
Hi mate. Sorry but that was from the same supplier as my previous reply.

We will be looking at a new supplier in the coming months.
 
Spiesy said:
Hi mate. Sorry but that was from the same supplier as my previous reply.

We will be looking at a new supplier in the coming months.
:( Soon I hope!! and remember bigger IS better. 400mm is available about the place but 500mm is proving difficult, might just have to do some permanent markings on the pot till these come in. I'll keep an eye on the site.
 
Any Half Barrel Chronical seals kits? The ones for the sample port?
 
We've just taken out a sponsorship package with AHB - so starting this new thread for future posts and forum shenanigans.

As this is our first post in our new "home", a little intro for those who need it:

-----------------

Full Pint are a brewing supply shop based out of Melbourne's northern suburbs (Heidelberg West). We have been running since late 2013. We specialise in premium products and brands, and online order fulfilment - supplying brewers Australia wide.
Full Pint are the biggest White Labs dealers in Australia, stocking around 60 x White Labs products at any given time - all dated. We are also the Australian distributors and agents for Chugger Pumps and stock all top-shelf brands.
Ran by Andrew (Cocko on AHB) and Spiesy (Spiesy on AHB) and with Lyle (Bridges on AHB) onboard for mid-week duties - Full Pint are here to help you make awesome beer.

-----------------
 
Back
Top