Mash Monster
Member
HiCan you please email a photo to our customer service team. I am sure they can offer a fix but I am not 100% sure of the fix myself.
I’ve already ordered a replacement temp control sticker but thanks for the reply
HiCan you please email a photo to our customer service team. I am sure they can offer a fix but I am not 100% sure of the fix myself.
I have a Benchy that has a drip from the left hand side about 1/2 way down that side
Has this happened with other benchy’s in the past?
Any idea as to where this leak could be originating from and how to fix it?
Ok thanks for the reply. I’ll look forward to checking out the insulated hose packs when availableIt's most likely condensation. Really the only way to stop these condensation drips is by continuing to improve the insulation. It seems to be more of an issue in warmer areas with higher humidity.
We are in the process of putting together insulated hose packs for the glycol hoses and also this kit will be available with dry break quick disconnect fittings so this will also help the situation when they are finished but in the meantime just do what you can do insulate the hoses and anywhere you are getting condensation.
Ok thanks for the reply. I’ll look forward to checking out the insulated hose packs when available
I also have another problem
I also have a G20 glycol chiller that has served me well however one side (the one that I’ve used the most) seems to not be pumping. It sounds like the pump motor is spinning but not pumping
Could it be possible that the impeller has come off the drive shaft?
Also would there be any instructions for how to pull the chiller apart to try to rectify or replace the pump?
Thanks again for your prompt reply
It's fairly common for this to be condensation so I am assuming this is the issue. In humid environments or when the chiller is getting run and low temperatures the condensation is an issue to be honest.I have a Benchy that has a drip from the left hand side about 1/2 way down that side
Has this happened with other benchy’s in the past?
Any idea as to where this leak could be originating from and how to fix it?
Enter your email address to join: