KegLand Questions and Answers

[rockofclay]

Ah, it's a little confusing with the out of stock status on the website.

 

[Josh Dodd]

Can the Gen 3 - 27l Triconical without Collection container (https://kegland.com.au/products/27l-fermzilla-tri-conical-pressure-brewing-kit) fit on the old metal stand for the Fermzilla All Rounder (https://kegland.com.au/products/fermzilla-all-rounder-stainless-stand)?
If you're not using the collection container, the included Triconical stand leaves more than 200mm of unused space underneath, making the whole setup too tall for most bar fridges. If I can fit the Triconical on the old Allrounders stand, it looks like the overall height will come down well below the 700mm required for most bar fridges.
Otherwise I need to cludge together some kind of shorter stand to hold it.

 

[hombredeletras]

My callipers have packed up, does anyone happen to know, or would be willing to kindly measure, the thickness of the SS in the main body of the Gen 4 Brewzilla? I’ve got the 35L, but picking up the 100L shortly and will be making a few mods. I’m assuming the thickness is the same across all the Gen 4 models… Cheers in advance

 

[cb341982]

Can the Gen 3 - 27l Triconical without Collection container (https://kegland.com.au/products/27l-fermzilla-tri-conical-pressure-brewing-kit) fit on the old metal stand for the Fermzilla All Rounder (https://kegland.com.au/products/fermzilla-all-rounder-stainless-stand)?
If you're not using the collection container, the included Triconical stand leaves more than 200mm of unused space underneath, making the whole setup too tall for most bar fridges. If I can fit the Triconical on the old Allrounders stand, it looks like the overall height will come down well below the 700mm required for most bar fridges.
Otherwise I need to cludge together some kind of shorter stand to hold it.
View attachment 124846

If you take the handle off your butterfly valve, you can sit the fermenter in this bucket https://www.bunnings.com.au/bunning...zi3XjuOXOpw6MszpxSWETfYMoevIbyWv_SP0wbsW9tSF7. The fermenter will have about 30mm clearance underneath and your overall height will be about 625mm

 

[clickeral]

Any chance on the next Brewzilla gen 4 update you can add the option to turn it on and off by holding one of the buttons down? Having to unplug it to turn it off can be a hassle

 

[clickeral]

My callipers have packed up, does anyone happen to know, or would be willing to kindly measure, the thickness of the SS in the main body of the Gen 4 Brewzilla? I’ve got the 35L, but picking up the 100L shortly and will be making a few mods. I’m assuming the thickness is the same across all the Gen 4 models… Cheers in advance

Hard to measure with the rolled lip at the top

Malt pipes 1.2mm and BZ body seems to be about 2mm (5mm lip minus size of the spacer)

My calipers are in 1mm increments so it's an eyeball measurement with them

 

[Josh Dodd]

Can the Gen 3 - 27l Triconical without Collection container (https://kegland.com.au/products/27l-fermzilla-tri-conical-pressure-brewing-kit) fit on the old metal stand for the Fermzilla All Rounder (https://kegland.com.au/products/fermzilla-all-rounder-stainless-stand)?
If you're not using the collection container, the included Triconical stand leaves more than 200mm of unused space underneath, making the whole setup too tall for most bar fridges. If I can fit the Triconical on the old Allrounders stand, it looks like the overall height will come down well below the 700mm required for most bar fridges.
Otherwise I need to cludge together some kind of shorter stand to hold it.

If you take the handle off your butterfly valve, you can sit the fermenter in this bucket https://www.bunnings.com.au/bunning...zi3XjuOXOpw6MszpxSWETfYMoevIbyWv_SP0wbsW9tSF7. The fermenter will have about 30mm clearance underneath and your overall height will be about 625mm

I ordered the Allrounder stand on a whim. Sadly it doesn't work. With the butterfly valve on the bottom of the tri-conical the stand is just too short. I think even if I just had a cap and triclover clamp without the butterfly, it would still be too short.
I'll be picking up a 10L bucket from Bunnings and giving @cb341982 idea a go. Removing the handle from the butterfly valve while the fermenter was full was a little nerve-wracking, I had visions of accidentally turning the valve and beer going everywhere!! Misison-accomplished though.
I'll pick up the bucket and a suitable bar fridge and get this batch cold-crashed.

 

[crowmanz]

Yes I believe so. We have made some good advances on this front and the tooling is getting close to complete so I hope we have this being sold before christmas.

Guessing no surprise pre-christmas drops of the mini kegerators?