rockofclay
Active Member
- Joined
- 1/10/05
- Messages
- 36
- Reaction score
- 3
Ah, it's a little confusing with the out of stock status on the website.
KegLand Questions and Answers
- Thread starter KegLand-com-au
- Start date
Help Support Australia & New Zealand Homebrewing Forum:
Can the Gen 3 - 27l Triconical without Collection container (https://kegland.com.au/products/27l-fermzilla-tri-conical-pressure-brewing-kit) fit on the old metal stand for the Fermzilla All Rounder (https://kegland.com.au/products/fermzilla-all-rounder-stainless-stand)?
If you're not using the collection container, the included Triconical stand leaves more than 200mm of unused space underneath, making the whole setup too tall for most bar fridges. If I can fit the Triconical on the old Allrounders stand, it looks like the overall height will come down well below the 700mm required for most bar fridges.
Otherwise I need to cludge together some kind of shorter stand to hold it.
If you're not using the collection container, the included Triconical stand leaves more than 200mm of unused space underneath, making the whole setup too tall for most bar fridges. If I can fit the Triconical on the old Allrounders stand, it looks like the overall height will come down well below the 700mm required for most bar fridges.
Otherwise I need to cludge together some kind of shorter stand to hold it.
hombredeletras
New Member
My callipers have packed up, does anyone happen to know, or would be willing to kindly measure, the thickness of the SS in the main body of the Gen 4 Brewzilla? I’ve got the 35L, but picking up the 100L shortly and will be making a few mods. I’m assuming the thickness is the same across all the Gen 4 models… Cheers in advance
If you take the handle off your butterfly valve, you can sit the fermenter in this bucket https://www.bunnings.com.au/bunning...zi3XjuOXOpw6MszpxSWETfYMoevIbyWv_SP0wbsW9tSF7. The fermenter will have about 30mm clearance underneath and your overall height will be about 625mm
clickeral
Well-Known Member
Any chance on the next Brewzilla gen 4 update you can add the option to turn it on and off by holding one of the buttons down? Having to unplug it to turn it off can be a hassle
clickeral
Well-Known Member
Hard to measure with the rolled lip at the top
Malt pipes 1.2mm and BZ body seems to be about 2mm (5mm lip minus size of the spacer)
My calipers are in 1mm increments so it's an eyeball measurement with them
I ordered the Allrounder stand on a whim. Sadly it doesn't work. With the butterfly valve on the bottom of the tri-conical the stand is just too short. I think even if I just had a cap and triclover clamp without the butterfly, it would still be too short.
I'll be picking up a 10L bucket from Bunnings and giving @cb341982 idea a go. Removing the handle from the butterfly valve while the fermenter was full was a little nerve-wracking, I had visions of accidentally turning the valve and beer going everywhere!! Misison-accomplished though.
I'll pick up the bucket and a suitable bar fridge and get this batch cold-crashed.
crowmanz
Well-Known Member
- Joined
- 13/1/11
- Messages
- 614
- Reaction score
- 222
Guessing no surprise pre-christmas drops of the mini kegerators?
Barãob
Active Member
Can I make BIAB in the Brewzilla gen 4 automatic pan ? Would the grain bag be inside or outside the malt basket?
clickeral
Well-Known Member
When are you getting more stock of the 26L Brewbuilt X3 in?
The RAPT Spunding valve is really quite close. All the injection molds for this product are finished and we were about to start manufacturing but we found a slightly more accurate pressure transducer that also was easier to assembly in the housing and we decided to change this but that required tweaks to the PCB and this has set us back slightly. We think this Digital Regulator and Spunding Valve will be available for sale in Australia in March this year. Sorry about the delay. The good news is that the accuracy will be about +/- 1% of the gauge range so its quite accurate compared with other options.
The SS FermZilla is probably also March too as we have found some other ways to make the design more efficient to produce and also reduce the RRP on this too.
If you want to turn off the elements you can at any time just press the play/pause button. The screen uses almost no power at all so once you hit the play pause button this would pretty much be the same thing.
I am not sure what you mean by "Automatic Pan" can you please elaborate so I can better understand.
Almost all of this kit here is already in stock:
https://kegland.com.au/products/26l-brewbuilt-x3-uni-conical-fermenter-jacketed-stainless-steel-7gal-complete-kit
The only thing that is missing is this pressure and vacuum relief valve so it's putting this whole bundle out of stock. So if you are really in a hurry you can purchase the kit without this valve now (by contacting our customer service staff or alternatively waiting until 21st Jan and the whole kit will be back in stock.
It will hold the tank fine is the answer. The only issue is the cone protrudes past the base of the stand so you would have to raise the all rounder stand to make it a bit higher so the cone can protrude out the base.
Sorry the Benchy Bench top kegerator has taken us longer than we expected to get finished. We have been doing several other upgrades to the cosmetic look of it to make it look a bit fancy on the kitchen bench like installing color changing LED lights and illumination around the tap shank etc. These other upgrades have been a bit time consuming but I think the final result will be worth waiting for.
I would say this product is now delayed until May 2025.
Similar threads
