Fs : Melb. Bench Capper, Thermowell, Ssr's

[andytork]

All,

Have a bench capper, not used a lot $20 (probably don't need a picture of this). Will throw in some bottles with this

Have about 5 x 25 Amp SSR's - $10 each (bought a full box)

4 x Motorised ball valves , 5 wire, 1/2 full bore stainless $40 each

5 x thermowells left $25 each (bought a lot)


And the URN, POT, esky, temp controllers still left from post below

Previous topic
here


All items pickup from Boronia 3155

Andy

 

[breakbeer]

got any pics of the thermowell?

 

[WarmBeer]

Would you be willing to post a thermowell in a postpak? At my expense, of course.

 

[JDW81]

Would you be willing to post a thermowell in a postpak? At my expense, of course.

+1

Also are the thermowells 1/2 inch?

 

[tricache]

If you are willing to post the STC 1000 I will take it!

 

[Dan Pratt]

On the previous thread you had for your gear, did you sell the immersion chiller?

 

[andytork]

Sorry for the late reply guys, had a long day at work yesterday


Simple pic of thermowell



Hole required for thermowell is 1/2 inch
length (inside of pot) is 100mm


I have a couple of 1206-D temp controllers , $20 each

spec here http://www.aussiehomebrewer.com/forum/inde...st&id=56622



Immersion chiller has sold

Happy to post any small items in padded bags or whatever



Andy

 

[WarmBeer]

Happy to post any small items in padded bags or whatever



Andy

I'll take a thermowell, thanks.

Will PM details.

 

[JDW81]

All,

Have a bench capper, not used a lot $20 (probably don't need a picture of this). Will throw in some bottles with this

Have about 5 x 25 Amp SSR's - $10 each (bought a full box)

4 x Motorised ball valves , 5 wire, 1/2 full bore stainless $40 each

5 x thermowells left $25 each (bought a lot)


And the URN, POT, esky, temp controllers still left from post below

Previous topic
here


All items pickup from Boronia 3155

Andy

Is this stuff still up for grabs?

Pm'd the other day but no reply...

Still keen for a thermowell and temp controller.

 

[andytork]

Sorry been very busy for last couple of days

I have replied too all the pm's now. Still got quite a few bits left, so PM if you are after anything

 

[andytork]

Been having another clean out and found

Found another couple of themowells and a couple of temp controllers (think I put them aside for someone who never turned up)

$20 for temp controllers, $25 for thermowell

Andy

 

[brad81]

What are the temp controllers mate? Are they like STC's or the dial ones?

Read further up Brad

I'll take 2 if you still have them.