• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

Fs : Melb. Bench Capper, Thermowell, Ssr's

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

andytork

Well-Known Member
Joined
26/4/08
Messages
443
Reaction score
36
All,

Have a bench capper, not used a lot $20 (probably don't need a picture of this). Will throw in some bottles with this

Have about 5 x 25 Amp SSR's - $10 each (bought a full box)

4 x Motorised ball valves , 5 wire, 1/2 full bore stainless $40 each

5 x thermowells left $25 each (bought a lot)


And the URN, POT, esky, temp controllers still left from post below

Previous topic
here


All items pickup from Boronia 3155

Andy
 
On the previous thread you had for your gear, did you sell the immersion chiller?
 
Sorry for the late reply guys, had a long day at work yesterday


Simple pic of thermowell

IMAG0176__Medium_.jpg

Hole required for thermowell is 1/2 inch
length (inside of pot) is 100mm


I have a couple of 1206-D temp controllers , $20 each

spec here http://www.aussiehomebrewer.com/forum/inde...st&id=56622

C1206_D.jpg

Immersion chiller has sold

Happy to post any small items in padded bags or whatever



Andy
 
All,

Have a bench capper, not used a lot $20 (probably don't need a picture of this). Will throw in some bottles with this

Have about 5 x 25 Amp SSR's - $10 each (bought a full box)

4 x Motorised ball valves , 5 wire, 1/2 full bore stainless $40 each

5 x thermowells left $25 each (bought a lot)


And the URN, POT, esky, temp controllers still left from post below

Previous topic
here


All items pickup from Boronia 3155

Andy

Is this stuff still up for grabs?

Pm'd the other day but no reply...

Still keen for a thermowell and temp controller.
 
Sorry been very busy for last couple of days

I have replied too all the pm's now. Still got quite a few bits left, so PM if you are after anything
 
Been having another clean out and found

Found another couple of themowells and a couple of temp controllers (think I put them aside for someone who never turned up)

$20 for temp controllers, $25 for thermowell

Andy
 
What are the temp controllers mate? Are they like STC's or the dial ones?

Read further up Brad :(

I'll take 2 if you still have them.
 
Back
Top