• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

FunkeBrewster

Active Member
Joined
29/7/16
Messages
36
Reaction score
3
So all the below needs to go!!! Have been sitting on this gear for a long time.
Aside from the books and bottle trees everything is new and never used.
Electrical/electronic gear was purchased for a control panel build that never happened so if anyone is looking for components for their own panel this will suit.
Its all listed on other various platforms and forums so get in quick.
I've heavily discounted the prices so not much room to move.
Postage/delivery will be priced on a per item basis, otherwise its pickup in the Logan area QLD.
I can take small items to Perth as I travel for work.

Dropbox link to photos

Books:

1 x Oxford Companion To Beer - $15
1 x American Sour Beers (some pages are dirty but otherwise in good condition) - $10
1 x Mastering Homebrew - $10
1 x 150 Great Australian Beers - $5
1 x Brewed with Balls - $5

Hardware:

2 x 3" Long BCS-460/462 Temp Probe w/ 1"/1.5" Tri-Clamp Compatible & 8ft Lead - $20each
3 x 3" Long BCS-460/462 Temp Probe w/ 1"/1.5" Tri-Clamp Compatible & M12 Quick Connect - $20 each

Tri-Clamp Fittings:
2 x 1"/1.5" Tri-Clamp Barbed 90deg - $2 each
8 x 1"/1.5" Tri-Clamp Barbed Straight - $1.5 each
2 x 1"/1.5" Tri-Clamp Short Ferrule - $2 each
6 x 1"/1.5" Tri-Clamp End Cap - $1.5 each

Fermenting/Measuring & Testing:
1 x Refractometer Specific Gravity & 0-32 Brix w/ATC & Case - $10
1 x Triple Scale Glass Hydrometer - $5
1 x Bottle Tree (90 Bottle Capacity) USED - $10
1 x Bottle Tree (70 Bottle Capacity) USED - $5
6 x Airlock with grommets - $2.50 each
4 x 25-38mm Bored Silicon Bung - $2.5 each
1 x 36-45mm Bored Silicon Bung - $3
1 x Star San 32oz Bottle ( very minimal usage, near full) - $10

Electrical/Electronics:
1 x Eaton NO 20A 6.5kW IP65 2 Pole Panel Mount Non Fused Isolator Switch - $20
1 x Conrad Aluminium Heatsink 350mm x 151mm x 48mm - $30
2 x Hager 250V 25A 1 pole NO Contact - $15 each
2 x Hager 250V 16A Circuit Breaker - $7.50 each
2 x Hager 250V 10A Circuit Breaker - $5 each
3 x 250V 20A NEMA L6-20R Flanged Twist-Lock Receptacle (recessed mount female) - $15 each
1 x 250V 30A NEMA L6-30 Flanged Twist-Lock Plug (recessed mount male) - $15each
3 x 250V 20A NEMA L6-20P Twist-Lock Plug (male) - $15 each
3 x 250V 30A NEMA L6-30P Twist-Lock Locking Plug (male) - $15 each
1 x 230-400VAC to 115VAC 63VA Panel Mount Transformer (Legrand 383-308) - $30
5 x 400mm Long 35mm Wide Slotted Metal DIN Rail - $10 (for the lot)
1 x Schneider 2 Position Toggle Switch ZB5 AD29 - $30
5 x Schneider 3 Position Selector Switch (22mm Cutout) (ZB5AD3) - $15 each
5 x 220VAC White LED (22mm Cutout) - $2 each
3 x 220VAC Blue LED (22mm Cutout) - $2 each
2 x 220VAC Orange LED (22mm Cutout) - $2 each
1 x 220VAC Green LED (22mm Cutout) - $2 each
1 x 220VAC Red LED (22mm Cutout) - $2 each
1 x Schneider Green Non Illuminated Plastic Push Button (ZB5AH03) - $5
1 x Schneider Red Non Illuminated Plastic Push Button (ZB5AH04) - $5
1 x Schneider Forward/Reverse + Stop Push Button (ZB5AA71114) - $15
1 x Schneider Potentiometer Head w/ Contact Base (22mm Cut Out) (ZB5AD922) - $50
1 x Schneider Maintained Push Button Head (22mm Cut Out) (ZB5AD28) - $15
32 x Schneider Electric ZBE-102 NC Contacts - $10 (for the lot)
16 x Schneider Electric ZBEE-101C NO Contacts - $5 (for the lot)
10 x Schneider Mounting Collars (ZB5AZ009) - $4 each
12 x 500mm L x 40mm W x 30mm D Grey Plastic Cable Ducting w/ Covers - $10 (for the lot)
 
Back
Top