The edit button on my original post is missing so please refer to below for current status of items.
Photo album link:
https://photos.app.goo.gl/7LegPJMiWE6hbsaP2
3x Pepsi Corny kegs. The 2 on the left will come with a free keg seal kit. The 3rd holds pressure perfectly fine. May contain residual PBW or beer.
$40 each - pickup only
SOLD TO GRUMPYPAUL pending pickup
SS Brewtech 7 Gallon Conical Fermenter. Includes pressure transfer/blow off. Needs 1 replacement seal for pickup tube.
$425 - pickup only -
SOLD TO Stubbie pending pickup
SS Brewtech FTSS chill system for above 7 Gallon Fermentor + Neoprene jacket
$200
70L Aluminium Kettle, Chef Innox brand with sandwich bottom. Includes all connections as per photos. Uses camlocks. 3piece valve on camlock for easy disassembly and cleaning.
$70 - pickup only
10 Gal/38L Cooler Mashtun with thermometer, camlocks and 3piece valve. Includes false bottom and auto sparge with floating ball for the inlet tubing as pictured.
$80 - pickup only
Red Lion PXU20020 PID control box for HERMS - Custom built with SS relay. Red Lion PID is a big step up from the $10 ebay PID. This PID is $170 new alone.
$120
SOLD to DJ_L3ThAL pending pickup
HERM IT complete HERMS - includes HERMS coil, SS enclosure with mounting brackets, 2.4kw element and wired to connect to above PID. Heating rate is around .8c/30seconds for a full mash around 30-35L. All camlocks and valves pictured included.
$200
SOLD to DJ_L3ThAL pending pickup
Keg King Magnetic Drive pump with camlocks and valves. Wired to plug into above PID. Come with SS head and original plastic head.
$40
SOLD to DJ_L3ThAL pending pickup
Perlick 650SS taps with what I think is brass shank. Will be given a quick courtesy clean before shipping/pickup.
$70 each -
1 SOLD to Beerandpies pending payment
Keg King Maltmuncher 2 roller Grain Mill. Just needs a screw for the handle, I will find one before posting/pickup. I have been using an electric drill to crush with.
$50 - pickup only
SOLD to coxy pending pickup
Keg King MKIII 30 plate chiller - Inc tubing and tap water has only ever been ran through the left side. Cleaned with PBW after brewing.
$50 -
SOLD to Stubbie pending pickup
Micromatic Regulator - $50
SOLD to Batz pending pickup/payment
Keg King 2.6L CO2 bottle - Date stamped 2016
$90 - pickup only
SOLD to JB pending pickup
Digital Stir Plate with 2 stirbars and power supply. Variable speed.
$70
3L Flask.
$10 - pickup only
SOLD to coxy pending pickup
½ inch Hardware, single prices
SS T Piece - $2 1x
SOLD to Digga pending pickup/payment
Nut - 50c
Nut+ recessed rubber washer - $1
End plug - 50c
2inch joiner - $1
Elbow - $1
Pickup tube - $5
Ball valve - $5
Thermowell - $5
SOLD to Digga pending pickup/payment
Threaded length with barbed end - $2
External Threaded barb - $1
Internal threaded barb - $1
Washers - 50c
1inch threaded piece with nut - $1
20mm holesaw for SS - $10
22mm holesaw for SS - $10
Refractometer - $20
SOLD to JB pending pickup
9x CO2 canisters - $1 each
5L jug - $5
Hop Spider Mesh Strainer - for Boil Kettle
$10
SOLD to JB pending pickup
Carbonation Lid for Corny Keg. Just needs new tubing.
$10
SOLD to Digga pending pickup/payment
Plastic Mash Paddle - Free pickup only
SOLD to coxy pending pickup
Short Copper pickup tube - $5
Gelatine Finings - $5
1kg DME - $5
SOLD to coxy pending pickup
Alu Scoop - $5
Assorted Keg tubing - Free with any purchase over $10, first in first serve
SOLD to Digga pending pickup/payment
Assorted Keg related items
Intertap with SS shank - $40
SS Shank - $10
John Guest fittings - $1 each
SOLD to Digga pending pickup/payment 3 shank push fittings and the 2 Y pieces, 3x straight JG SOLD to TSMill pending pickup
Keg OUT fitting with JG connector - $3
SOLD to Digga pending pickup/payment
Keg Lube - $1
Thread Tape - 50c
Keg King Thermometer - $5
Glass Sight Gauge with Thermometer - $10
Collet Spanner - $5
SOLD to TSMill pending pickup
Copper Tubing - $1
Blackboard Tap Handle - $1 (requires drilling for the hole to screw onto tap, and light sanding)
SOLD to Digga pending pickup/payment
Calcium Sulphate - $10 includes container
Calcium Chloride - $10 includes container
Lactic Acid - $5 (¾ full)
Calcium Carbonate - $5
Barbed Female Camlocks - $5 each (may only be 3 or 4 available, ask first)
Aerator/Cleaner attachment for drill - works well. $10
SS Drip Tray - $10 needs a minor clean.
SOLD to Bretta pending pickup
STC temp control - $30
SOLD to Gregos pending payment
Cheers,
Aaron[/QUOTE]
