• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

Massive brewery sale - SS Brewtech, PID, HERMS, Mash tun, kegs etc

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Thanks for the images. I'll have to miss the SS shank my taps are snaplok type. I have no real need for the c02 either, I've been using 1kg bottles for the mini kegs.

I'll take the 3 shank push fittings and the 2 Y pieces please.

I'll need postage to Newcastle. PM me with Bank details and total cost and I'll transfer the coins and supply address.

Thanks again.
 
The edit button on my original post is missing so please refer to below for current status of items.

Photo album link:
https://photos.app.goo.gl/7LegPJMiWE6hbsaP2



3x Pepsi Corny kegs. The 2 on the left will come with a free keg seal kit. The 3rd holds pressure perfectly fine. May contain residual PBW or beer.
$40 each - pickup only SOLD TO GRUMPYPAUL pending pickup

SS Brewtech 7 Gallon Conical Fermenter. Includes pressure transfer/blow off. Needs 1 replacement seal for pickup tube.
$425 - pickup only - SOLD TO Stubbie pending pickup

SS Brewtech FTSS chill system for above 7 Gallon Fermentor + Neoprene jacket
$200

70L Aluminium Kettle, Chef Innox brand with sandwich bottom. Includes all connections as per photos. Uses camlocks. 3piece valve on camlock for easy disassembly and cleaning.
$70 - pickup only

10 Gal/38L Cooler Mashtun with thermometer, camlocks and 3piece valve. Includes false bottom and auto sparge with floating ball for the inlet tubing as pictured.
$80 - pickup only

Red Lion PXU20020 PID control box for HERMS - Custom built with SS relay. Red Lion PID is a big step up from the $10 ebay PID. This PID is $170 new alone.
$120 SOLD to DJ_L3ThAL pending pickup

HERM IT complete HERMS - includes HERMS coil, SS enclosure with mounting brackets, 2.4kw element and wired to connect to above PID. Heating rate is around .8c/30seconds for a full mash around 30-35L. All camlocks and valves pictured included.
$200 SOLD to DJ_L3ThAL pending pickup

Keg King Magnetic Drive pump with camlocks and valves. Wired to plug into above PID. Come with SS head and original plastic head.
$40 SOLD to DJ_L3ThAL pending pickup

Perlick 650SS taps
with what I think is brass shank. Will be given a quick courtesy clean before shipping/pickup.
$70 each - 1 SOLD to Beerandpies pending payment


Keg King Maltmuncher 2 roller Grain Mill. Just needs a screw for the handle, I will find one before posting/pickup. I have been using an electric drill to crush with.
$50 - pickup only SOLD to coxy pending pickup

Keg King MKIII 30 plate chiller - Inc tubing and tap water has only ever been ran through the left side. Cleaned with PBW after brewing.
$50 - SOLD to Stubbie pending pickup

Micromatic Regulator - $50 SOLD to Batz pending pickup/payment

Keg King 2.6L CO2 bottle - Date stamped 2016
$90 - pickup only SOLD to JB pending pickup

Digital Stir Plate with 2 stirbars and power supply. Variable speed.
$70

3L Flask.
$10 - pickup only SOLD to coxy pending pickup

½ inch Hardware, single prices

SS T Piece - $2 1x SOLD to Digga pending pickup/payment

Nut - 50c
Nut+ recessed rubber washer - $1
End plug - 50c
2inch joiner - $1
Elbow - $1
Pickup tube - $5
Ball valve - $5
Thermowell - $5 SOLD to Digga pending pickup/payment
Threaded length with barbed end - $2
External Threaded barb - $1
Internal threaded barb - $1
Washers - 50c
1inch threaded piece with nut - $1
20mm holesaw for SS - $10
22mm holesaw for SS - $10
Refractometer - $20 SOLD to JB pending pickup
9x CO2 canisters - $1 each

5L jug - $5

Hop Spider Mesh Strainer
- for Boil Kettle
$10 SOLD to JB pending pickup

Carbonation Lid for Corny Keg. Just needs new tubing.
$10 SOLD to Digga pending pickup/payment

Plastic Mash Paddle - Free pickup only SOLD to coxy pending pickup

Short Copper pickup tube - $5

Gelatine Finings - $5

1kg DME - $5 SOLD to coxy pending pickup

Alu Scoop - $5

Assorted Keg tubing - Free with any purchase over $10, first in first serve SOLD to Digga pending pickup/payment

Assorted Keg related items

Intertap with SS shank - $40
SS Shank - $10
John Guest fittings - $1 each SOLD to Digga pending pickup/payment 3 shank push fittings and the 2 Y pieces, 3x straight JG SOLD to TSMill pending pickup
Keg OUT fitting with JG connector - $3 SOLD to Digga pending pickup/payment
Keg Lube - $1
Thread Tape - 50c
Keg King Thermometer - $5
Glass Sight Gauge with Thermometer - $10
Collet Spanner - $5 SOLD to TSMill pending pickup
Copper Tubing - $1
Blackboard Tap Handle - $1 (requires drilling for the hole to screw onto tap, and light sanding) SOLD to Digga pending pickup/payment

Calcium Sulphate - $10 includes container
Calcium Chloride - $10 includes container
Lactic Acid - $5 (¾ full)
Calcium Carbonate - $5

Barbed Female Camlocks - $5 each (may only be 3 or 4 available, ask first)

Aerator/Cleaner attachment for drill - works well. $10

SS Drip Tray - $10 needs a minor clean. SOLD to Bretta pending pickup

STC temp control - $30 SOLD to Gregos pending payment


Cheers,

Aaron[/QUOTE]
 
Last edited:
Hey mate missed me for the carb lid, keg out fitting, thermowell, keg tubing, ss T piece and blackboard handle.

Cheers
 
I gave made a mistake in the taps. They are 545PC Chrome plated flow control. New price $35 each.
Somehow 650ss was stuck in my head.

I have contacted Beerandpies apologizing and offered a refund.
 
I think Grott would be proud of my efforts to not spend anything on this.
Despite my immediate reaction being "OOH STUFF" followed shortly by an insatiable itch to piss away my consultant dollarydoos
 
Hi everyone that has purchased. I have a medical emergency heading to Sunshine Hospital on drs orders.

I should be able to still post out on the weekend but pickups may need to happen on the weekend or next week sorry.
 
Just been given an old regulator for nix, so I don't need the Micromatic Regulator - $50

Up for grabs brewers.
 
Hope you're okay @Khellendros13

I'll put my hand up for the following:
- Stirplate
- Cooler
- 2x Nuts w/ o-ring groove
- 2x Nuts (thinner ones, no o-ring groove)

Pending availability of a pick-up arrangement...

EDIT: Interested in the MM thermometer/ sight glass thing. Any more detailed pics on how it fits together?
 
Sorry mate didn't read the state you're in. There's a Sydenham in NSW as well.
 
Back
Top