chappo1970
Piss off or Buy Me A Beer
Fellow Brewerhood,
Whilst I know this topic will be a how long is a piece of string, how much money is too much money to spend on a rig and completely subjective to the individual brewer, I love full automation, I hate the idea of automation, I imagine, I am curious as to what you think would be the ultimate brewery? Anywho lets get started....
I am in the throws of planning Sherman Mk3, and whilst I was busily sketching schematics for plumbing, electrical, vessels, rig layout and a like it dawned on me that I am really starting from scratch, a blank canvass as it were. You see when I built my last two rigs they were just a progression from K&K to AG to more advanced AG brewing techniques. I more or less scavenged parts and bits as I went on from previous rigs, junk yards, other brewers and bought what I needed (sometimes what I didn't need either). I also had no real preconceived idea's when I was upgrading. Sure I researched and asked questions but now I am faced with knowledge. No only from what I learned along the way previously but also from what I seen, a lot of your rigs in the flesh, brew days etc. And I can say not one rig is the same as the other. Many brewers employ many different bits and pieces as well as methods and processes to get to basically the same result. Good Beer. But if you had the chance to start from a blank page what would you do?
I guess from my point of view some of the things I have jotted down as a design brief to myself for my ultimate rig are:
1. 3 vessel system capable of single and double batches
2. Easy to clean, pull down and set up
3. Incorporates HERMS (nothing against RIMS fella's it's just a little finicky for me)
4. Automated mashing incorporating the HERMS
5. All Stainless
6. As compact as possible so as to take up the least amount of space in the brewery (Sherman Mk1 and Mk2 were way too big and cumbersome)
7. Full electric rig.
8. All areas and plumbing easily accessible to fix on the fly or clean when needed.
9. Plug and play. In other words plug in the power and water, tip in the grains and way I go.
10. Bomb proof consistency.
11. Anti boil over device ( :lol: that would be the most over used part of the rig)
Anyway those are my thoughts to date but would be interested in hearing yours.
Cheers
Chap Chap
Whilst I know this topic will be a how long is a piece of string, how much money is too much money to spend on a rig and completely subjective to the individual brewer, I love full automation, I hate the idea of automation, I imagine, I am curious as to what you think would be the ultimate brewery? Anywho lets get started....
I am in the throws of planning Sherman Mk3, and whilst I was busily sketching schematics for plumbing, electrical, vessels, rig layout and a like it dawned on me that I am really starting from scratch, a blank canvass as it were. You see when I built my last two rigs they were just a progression from K&K to AG to more advanced AG brewing techniques. I more or less scavenged parts and bits as I went on from previous rigs, junk yards, other brewers and bought what I needed (sometimes what I didn't need either). I also had no real preconceived idea's when I was upgrading. Sure I researched and asked questions but now I am faced with knowledge. No only from what I learned along the way previously but also from what I seen, a lot of your rigs in the flesh, brew days etc. And I can say not one rig is the same as the other. Many brewers employ many different bits and pieces as well as methods and processes to get to basically the same result. Good Beer. But if you had the chance to start from a blank page what would you do?
I guess from my point of view some of the things I have jotted down as a design brief to myself for my ultimate rig are:
1. 3 vessel system capable of single and double batches
2. Easy to clean, pull down and set up
3. Incorporates HERMS (nothing against RIMS fella's it's just a little finicky for me)
4. Automated mashing incorporating the HERMS
5. All Stainless
6. As compact as possible so as to take up the least amount of space in the brewery (Sherman Mk1 and Mk2 were way too big and cumbersome)
7. Full electric rig.
8. All areas and plumbing easily accessible to fix on the fly or clean when needed.
9. Plug and play. In other words plug in the power and water, tip in the grains and way I go.
10. Bomb proof consistency.
11. Anti boil over device ( :lol: that would be the most over used part of the rig)
Anyway those are my thoughts to date but would be interested in hearing yours.
Cheers
Chap Chap