What are you brewing in 2017 ?

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
That picture with all the cubes.....keep it handy folks. If your partner or anyone else ever complains that you're brewing too much beer, just bring out the picture and tell them that's how much everyone else is brewing.............
 
That picture with all the cubes.....keep it handy folks. If your partner or anyone else ever complains that you're brewing too much beer, just bring out the picture and tell them that's how much everyone else is brewing.............

And that was only roughly half of them ;)
 
2 brews done today

Jamil's extra yellow , I have called mine Old Yella Lager on a wyeast pilsen yeast cake

And Brewmans Stella clone on a wyeast bohemian lager yeast cake

Desperately need a lager fridge I think
 
158 - Hefeweizen 6

OG 1.043
FG 1008
ABV 4.8%
IBU 13
EBC 9
Vol 20L
Eff 75%

mashed @ 65c for 45mins

57% Wheat
25% Vienna
15% Rolled Oats
3% Melanoiden

60min boil

Magnum @ 60mins = 13ibu

No whirlfloc

Fermented with either WB06 Fermentis or Danstar Munich @ 17c
 
158 - Hefeweizen 6

OG 1.043
FG 1008
ABV 4.8%
IBU 13
EBC 9
Vol 20L
Eff 75%

mashed @ 65c for 45mins

57% Wheat
25% Vienna
15% Rolled Oats
3% Melanoiden

60min boil

Magnum @ 60mins = 13ibu

No whirlfloc

Fermented with either WB06 Fermentis or Danstar Munich @ 17c

if you can source it mate, i’d highly highly recommend m20 if you’re going dry. in all my experiences a much better balance between clove and banana
 
Got a us pale ale about to come out of the FV when it clears:
10000g pale
1000g Vienna
900g cara pils
200g belgian aromatic
500g wheat malt

80g Amarillo & 5m
30g chinook @ 5m
No chill

Then 200g Amarillo dry hop followed by mixed 100g Amarillo & 100g simcoe dry hop / hop tea

55L batch with us05

Óg 1.050

Following that:
Export India Porter
12000 pale
4000 brown
1000 Amber
1000 black
100g chinook @5
100g centennial @5
Us05 ÓG ~ 1.068

After that an English bitter/pale ale or a bohemian pilsner
 
if you can source it mate, i’d highly highly recommend m20 if you’re going dry. in all my experiences a much better balance between clove and banana

Yeah I can get m20, tried it with hefe 3 and hefe 4 was with wb06 which I preferred. Plus the mangroves just has long lag which bothers me, lol.

Aiming for more clove on this one, fermenting at 17c to steer away from the banana.
 
Grain Milled and in mash-tun
Water added, recirc tested - flow rate set.
Heat Exchange temp set

Timers on for 3.30am tomoz

Title: Eagle Point Pale v4

Brew Method: All Grain
Style Name: American Pale Ale
Boil Time: 90 min
Batch Size: 84 liters (ending kettle volume)
Boil Size: 98 liters
Boil Gravity: 1.037
Efficiency: 75% (ending kettle)


STATS:
Original Gravity: 1.044
Final Gravity: 1.010
ABV (standard): 4.42%
IBU (tinseth): 43.18
SRM (morey): 4.43

FERMENTABLES:
8.91 kg - German - Pilsner (55.7%)
0.35 kg - German - CaraMunich III (2.2%)
4.14 kg - German - Wheat Malt (25.9%)
0.8 kg - German - Acidulated Malt (5%)
1.5 kg - Rolled Oats (9.4%)
0.3 kg - German - Caramel Pils (1.9%)

HOPS:
15 g - columbus, Type: Pellet, AA: 14.5, Use: First Wort, IBU: 8.66
30 g - Chinook, Type: Pellet, AA: 13, Use: Whirlpool for 20 min at 99 °C, IBU: 13.93
50.91 g - Cascade, Type: Pellet, AA: 6.3, Use: Whirlpool for 20 min at 99 °C, IBU: 11.46
63.64 g - Citra, Type: Pellet, AA: 13.5, Use: Hopback for 20 min at 70 °C, IBU: 5.11
63.64 g - mosaic, Type: Pellet, AA: 10.6, Use: Hopback for 20 min at 70 °C, IBU: 4.02

MASH GUIDELINES:
1) Temperature, Temp: 65.5 C, Time: 120 min, Amount: 47.1 L
Starting Mash Thickness: 3.25 L/kg

YEAST:
Fermentis / Safale - English Ale Yeast S-04
Starter: No ~ slurry
Attenuation (avg): 75%
Flocculation: High
Optimum Temp: 12.22 - 25 C
Fermentation Temp: 20 C
Fermentation Type: Pressure

TARGET WATER PROFILE:
Profile Name: Light colored and hoppy
Ca2: 75
Mg2: 5
Na: 10
Cl: 50
SO4: 150
HCO3: 0
Water Notes:
Gysum 18g
Epsom 10
Cal Chl 8
NOTES:
use yeast cake from a clean ale on s-04

Generated by Brewer's Friend - https://www.brewersfriend.com/
Date: 2017-11-06 08:17 UTC
Recipe Last Updated: 2017-11-05 06:12 UTC

I'm excited!
 
image.jpg
Living on the edge
 
image.jpg
I
That your mash return droid? Is it height adjustable?
Its my sparge arm and tis adjustable the mash recirculate manifold had decided to dive for some firmer bed and in the process it pushed up the grain above it...tho ended up with 1042bg and 105litres pre-boil so geez, gotta say I'm a big fan of the overnight soak and a long mash
Did a very acidic sparge of 3pH, was aiming for 3.5
Lucky for antiboilover fermcap
 
Sweet, looks great. I've never understood the advantage of the sparge arm when you have the recirc manifold? I just pump my sparge water into the recird manifold return as A. it flushes the lines/manifold/HEX out with hot water and B. doesn't spray the water through air potentially uptaking some Oxygen. Unless I'm completely missing some advantage of the sparge arm?
 
Sweet, looks great. I've never understood the advantage of the sparge arm when you have the recirc manifold? I just pump my sparge water into the recird manifold return as A. it flushes the lines/manifold/HEX out with hot water and B. doesn't spray the water through air potentially uptaking some Oxygen. Unless I'm completely missing some advantage of the sparge arm?
The sparge arm doesn't perform as I would have liked but at the moment I have to connect it so I can shut the flow off to that outlet.
I don't think you're missing anything. I did use it today because I didn't want to disturb the grain bed hoiking out the recirc manifold, mushy mash today, must be all the oats...
 
tho ended up with 1042bg and 105litres pre-boil so geez, gotta say I'm a big fan of the overnight soak and a long mash

Droid,

I run a 20lt BM and have improved by overall brew house efficiency by about 10% to 85%, mash eff is around 92-93%.

Apart from the standard things like grain milling gap, water pH, I do a very long hydration rest and a very long mash out rest to increase the %

mash in @ 20c ( summer 24c ) rest for 120mins
raise temp to Beta Amalayse (anywhere between 62-68c) for 60mins
raise temp to Alpha Amalayse (anywhere between 69-73c) for 30mins
raise to mash out or 76c for 3hrs

I do this overnight, mashing in at 830pm, ready by 630am. The 76c mashout temp is lower than 78c to avoid it creeping up t 79 or 80c and getting any tannins.
 
Droid,

I run a 20lt BM and have improved by overall brew house efficiency by about 10% to 85%, mash eff is around 92-93%.

Apart from the standard things like grain milling gap, water pH, I do a very long hydration rest and a very long mash out rest to increase the %

mash in @ 20c ( summer 24c ) rest for 120mins
raise temp to Beta Amalayse (anywhere between 62-68c) for 60mins
raise temp to Alpha Amalayse (anywhere between 69-73c) for 30mins
raise to mash out or 76c for 3hrs

I do this overnight, mashing in at 830pm, ready by 630am. The 76c mashout temp is lower than 78c to avoid it creeping up t 79 or 80c and getting any tannins.


Interesting mate , I have a grainfather and always do a double brew day , this would save considerable time aswell as increased efficiency
 
Got 90L at 1.050 in the end, will have to check what that eff is. pH in the sparge was low - does a lower pH sparge increase efficiency if ur mash is 5.1 at the end and you sparge at 3? As opposed to sparging with household 7pH?

...bit pissed actually
 

Latest posts

Back
Top