CapnK
Well-Known Member
- Joined
- 5/1/14
- Messages
- 68
- Reaction score
- 15
This is what I did I the end too, after checking that the arduino had enough current to drive the buzzer.Neo__04 said:I had the exact same problem, couldnt fix it, ended up changing the code to have the buzzer on a different pin, then wiring the buzzer direct to that pin.
That was the only way i could fix it
Couldn't see anything obviously wrong with djar007's soldering, so I routed around the problem
Next job, finish the plumbing.