Would 32A single phase be adequate?
KegLand Questions and Answers
- Thread starter KegLand-com-au
- Start date
Help Support Australia & New Zealand Homebrewing Forum:
ozdevil
Well-Known Member
- Joined
- 4/3/04
- Messages
- 342
- Reaction score
- 115
i couldnt tell you i dont work for kegland or make them.
i am under the impression they will be 3 phase
- Joined
- 17/11/14
- Messages
- 50
- Reaction score
- 14
Hi @KegLand-com-au - Any more thoughts on this upgrade kit? Love the easy breakdown for cleaning of the new design, but I've got a couple of existing tanks & kits that make it hard to justify completely new sets...
The 100L brewzilla will require 32amp socket single phase or alternatively 10amp three phase. So that means a single phase socket that looks like this if you only have single phase at your house:
https://www.tradezone.com.au/produc...ns-industrial-switched-outlet-grey-27330.html
or alternatively a socket like this if you go wit the three phase option(you will need 5 pin type):
Grey | Switched Socket Outlet, 500V, 10A, 5 Round PIN, IP66, 1 Pole
For the FermZilla SS we will be making a single batch 25-30L and another double batch unit that is 50-55L size too. We have no plans to make any FermZilla SS units that are larger than this in the near future.
ozdevil
Well-Known Member
- Joined
- 4/3/04
- Messages
- 342
- Reaction score
- 115
Thanks for that info
Touche. The BZ gen 4 uses a conventional ball valve but when we are talking about hot side it's not of such a large concern. I must say I was assuming you wanted these for cold side in your fermenter or something.
It's best to contact our distributors in UK as they will be able to give you a better estimaiton of when they will put the product on sale.
https://www.kegland.com.au/distributor
My guess wuold be that stock will start to turn up in Europe in about June/July this year.
We dont really have enough parts at the moment to satisfy the current demand for the whole FermZilla Tri-Conical units and we are struggling to make enough stock as it is right now. With that said once we get more parts it should be possible for us to make upgrade kits. The parts you would need in the upgrade kit would be:
1. New Tri-clover tank
2. Tri-clamp (3inch and 2inch)
3. Butterfly valve
4. Tri clover lid for collection container
5. Few seals
As soon as we have more spare parts we will put this online as a bundle so you can purchase the upgrade kit
This is a really complicated wiring job so I think it's best that you re-sell your 3.1.1 and then just purchase a whole new one.
Yes that would be fine.
Codemunk3y
Member
Does the old Brewzilla neoprene cover fit the Gen 4?
ozdevil
Well-Known Member
- Joined
- 4/3/04
- Messages
- 342
- Reaction score
- 115
i emailed kegland a week or so ago and they said they fit the gen 4
No worries. Is there a reason you opted for the single phase industrial plug as opposed to a 32A GPO?
hotwaterpls
Well-Known Member
Hi @KegLand-com-au do you know the size of this o-ring for the drafto tapping head for your growlers? Aside from the fact the dip tube doesn't reach the bottom as it was cut too short from factory and the mfl barb seeming to wear into the plastic of the lid, the o-ring now seems to have perished.
I can resolve the other issues easily enough but would be great to find out the size and if the o-ring can be replaced. As it stands I can't use the attachment and it's been sitting around out of use since the one time I did get to test it out.
I can resolve the other issues easily enough but would be great to find out the size and if the o-ring can be replaced. As it stands I can't use the attachment and it's been sitting around out of use since the one time I did get to test it out.
It would be good to get the double batch unit to fit the rapt fermentation fridge with accessories attached including the hop bong. I have my fingers crossed.
@KegLand-com-au
How come when buying the Tri-Conical pressure kit, it comes out nearly $10 cheaper (when accounting for the spunding kit costing $39.99, it's $19 atm, not too sure if this is an error) when buying all the components separately then in the kit itself. It sort of defeats the purpose of the kit.
How come when buying the Tri-Conical pressure kit, it comes out nearly $10 cheaper (when accounting for the spunding kit costing $39.99, it's $19 atm, not too sure if this is an error) when buying all the components separately then in the kit itself. It sort of defeats the purpose of the kit.
@KegLand-com-au
I'm pretty new to homebrewing, and I wanted to make sure this wasn't a bad idea. I recently picked up a few of the 8l PET kegs/bottles and 1 tapping head, and I just wanted to get a sanity check on what I was planning to use them for and avoid any bottle bombs or anything. I was thinking of splitting a single batch between the 3, force carbing one as normal, and doing a 2nd fermentation with priming sugar with the other 2. Would it be alright to treat them as regular bottles and fill to within a few cm from the top, or would it be better to fill to 7l or so, squeeze the bottle so there's as little head space as possible and then cap, leaving stacks of room for the bottles to pressurise? I would then just swap the tapping head on and serve as a regular keg.
Also a more general question, if I rack to the bottles without force carbing or a 2nd fermentation and store at room temperature is that okay or best to avoid?
Anyone else feel free to chime in too, just thought this would be the best place for the question.
I'm pretty new to homebrewing, and I wanted to make sure this wasn't a bad idea. I recently picked up a few of the 8l PET kegs/bottles and 1 tapping head, and I just wanted to get a sanity check on what I was planning to use them for and avoid any bottle bombs or anything. I was thinking of splitting a single batch between the 3, force carbing one as normal, and doing a 2nd fermentation with priming sugar with the other 2. Would it be alright to treat them as regular bottles and fill to within a few cm from the top, or would it be better to fill to 7l or so, squeeze the bottle so there's as little head space as possible and then cap, leaving stacks of room for the bottles to pressurise? I would then just swap the tapping head on and serve as a regular keg.
Also a more general question, if I rack to the bottles without force carbing or a 2nd fermentation and store at room temperature is that okay or best to avoid?
Anyone else feel free to chime in too, just thought this would be the best place for the question.
Similar threads
