brisie
Well-Known Member
I want one of these bucket blasters too. For the last couple of days it read back in stock 15/12 checked today and it reads out of stock. Are these sold out already or a typo?
KegLand Questions and Answers
- Thread starter KegLand-com-au
- Start date
Help Support Australia & New Zealand Homebrewing Forum:
@kegland are the K-Lok male tap adaptors deep enough to support flow control taps?
Thanks
https://www.kegland.com.au/k-lok-male-x-tap-shank-adaptor.html
Thanks
https://www.kegland.com.au/k-lok-male-x-tap-shank-adaptor.html
Yes they are, I've used them on FC and non-FC Intertaps and also on a stout spout with the same tap thread.
Can't guarantee it but I've used almost identical adapters (identical in the ways that matter for this discussion) from Bracton who also sell Perlicks so I'd be extremely surprised if they didn't fit fine. The difference (aside from price) is that the Bracton ones have splines on the adapters that mate to the splines on the taps, whereas the K-lok adapters don't have those splines.
The Bucket Blaster Keg and Fermenter Washer Kit doesn't have the arrival date yet. This product is new to our range and has only just been finished. We also decided to include a printed bucket and cardboard box and this is taking a little bit longer. So I think this will come into stock in Jan next year.
Are you sure you do not want to wait for our new model FC tap. We have a new flow control tap that will work better than the Perlick 650SS some time next year. It's still in tooling stage at the moment but I have not found the 650ss to work particularly well. Have others out there found they get quite a bit of foaming with the Perlick 650SS? Would be keen to know what you other guys out there think?
Yes that is correct. We do not put the splines in these k-lok tap shank adaptors for this reason. This is so they match all other taps on the market. So in order to fix the orientation it just relies on the tightness of the coupling rather than the splines.
Sorry this must have been a mistake. I think someone here accidentally put the wrong date on the website if it said 15/12. Definitely we cannot get these until Jan.
billygoat
Well-Known Member
I've been using a couple of Perlick 650SS for 2 years, no problems with foaming at all. Really good tap but at about $100 a throw they are not cheap. Also have 3 SS Intertap FC taps that work well.
Interested in this, what basic shape is the tap? Still an Intertap / Perlick style body?
@KegLand-com-au when will you have the seriex x keggerator in stock again?
That sounds good, but unfortunately I need something now.
My lines are balanced but I serve off of an ssbrewtech Brite tank and the flow is just way too fast, just need to slow it down. This is even with using over 3m of your 4mm beer line at 12psi
Engibeer
Well-Known Member
- Joined
- 1/9/13
- Messages
- 376
- Reaction score
- 109
What's the pressure rating of the pump?
Can the nozzle be replaced with a CIP ball? Will the pump provide enough pressure?
Just wondering if it works effectively enough to remove the krausen ring with no direct spray at this location.
Thanks
How about dump the cardboard box and run with just a bucket?
FarsideOfCrazy
Well-Known Member
- Joined
- 21/6/08
- Messages
- 700
- Reaction score
- 196
Hi @KegLand-com-au
What sort of cleaning chemicals can the bucket blaster handle? Eg. Can it be used with the caustic soda cleaner or will this damage the pump?
What sort of cleaning chemicals can the bucket blaster handle? Eg. Can it be used with the caustic soda cleaner or will this damage the pump?
Similar threads
