Entire Brewery For Sale.

[431neb]

I think I'm ready.

 

[bradsbrew]

I think I'm ready.

The cans upside down big fella.

 

[rotten]

Yardy your gear was always and still is impressive mate. It has certainly inspired my current setup and future plans. And Warras manifold was better than yours :lol:

Although not better than mine h34r:

 

[431neb]

I think I'm ready.

Ever heard of invert syrup BB???

 

[yardy]

Righto, the sale fell through so this is all up for grabs again, $1500 ono the lot.

that's includes just under 70Kg of grain, 2.7Kg in hops, dry and liquid yeasts, starsan, PBW, unopened brewbrite, unopened yeast nutrient, half bag whirfloc.
the grain has been stored in a sealed 44, i weighed it all the other day and there's no nasties etc, hops, yeast, and other assorted stuff has been in the kegerator stored cold.

All 316 Stainless Brewstand
Swagelok Fittings and 3 Piece Ball Valves (will not leak) see here Swagelok

Brewery has a Stainless Heat Exchanger, 12mm inside 20mm with swagelok fittings, March Pump, MM2 Mill with Aluminium Hopper seen here Monster Mill, Pre Chiiler, 18 Gallon Kettle, 50lt HLT, 45LT Mash Tun.

Brewery works as follows..
Mash Tun is gravity fed from the gas fired HLT.
Mash is recirculated through the Tun via March Pump, a custom false bottom and secondary manifold after mash is complete to clear wort.
After recirculation is complete, wort is pumped to the gas fired kettle for boiling.
Once Boil is complete it can be pumped through the Heat Exchanger and back into the Kettle continuously whilst cooling water is fed through the heat exchanger via mains water and the pre chiller to chill the wort to pitchable temps.
Alternatively if you No-Chill the heat exchanger can be bypassed and the wort transferred directly to a cube.
Cleaning the Tun after a mash is quick and easy, the bulk of the grain is scooped to a bucket, the false bottom and the manifold are removed (see pics) and the remainder is hosed out via a valve in the base, no mess and is usually done whilst the transfer to the kettle is underway, takes about 5 min.

Included in the sale are Grain, Hops and Yeast.

Grain.
Marris Otter 14KG
Wey Vienna 4KG
Wey Munich ll 8KG
Golden Promise 2KG
Wey Pils Malt 1.5 Sacks (1unopened)

Speciality Malts.
Victory Malt 1KG
Black Malt 500gm
Crystal 250gm
Carapils 200gm
Choc Chit 150gm
Roast Malt 300gm
Acidulated Malt 600gm

Hops by Hops Direct.
Strisselspalt 2.5% 515gm
Styrian Goldings 5.2% 350gm
UK Fuggles 5.1% 470gm
Czech Saaz 5.5% 350gm
Ger Perle 6.7% 280gm

Hops by Craftbrewer.
Willamette 4.7% 90gm unopened
Styrian Goldings 5.0% 90gm unopened
Cascade 5.0% 90gm unopened
+ 500gm of assorted hops that are in airtight containers labelled Aussie, Euro, UK, NZ and USA.
also some PBW and Star San included.

Yeast.
Wyeast Budvar Lager
Wyeast Belgian Wheat (for Batz

)

All grain has been stored in original sacks in a sealed 44 gal drum.
All hops and yeast has been stored in containers at 3*C in the kegerator.

Brewery, Mill and Heat Exchanger.

Reduced: 89% of original size [ 893 x 730 ] - Click to view full image

Reduced: 78% of original size [ 1024 x 768 ] - Click to view full image

check previous pages for more pics and info, PM.

cheers



will be advertising the Bar with lucky 7 font and kegs after this is sold.

 

[real_beer]

Righto, the sale fell through so this is all up for grabs again, $1500 ono the lot.

check previous pages for more pics and info, PM.

cheers

will be advertising the Bar with lucky 7 font and kegs after this is sold.

To anyone who might be thinking about getting into this kind of setup I'll tell you straight, although it's a lot of fun putting this kind of build together yourself the costs add up real quick for every little nut & bolt you have to buy. I live in Perth but knowing what I do now about all these costs, I'd be hanging out for a setup like this to come along, I'd have pounced on it & had it shipped over without hesitation. I know some people have great skills for building these setups & have access to cheap parts & favours from mates but even then I doubt they could match the bang for buck this system offers. Great buy for some lucky *******.

Good luck with the sale

 

[Cocko]

Righto, the sale fell through so this is all up for grabs again, $1500 ono the lot.

Ridiculous value!

As real_beer says, the building is fun but the **** adds up real quick!

Good luck with the sale Yard but I am sure you will not need it, that is an awesome buy.


Please some one buy it quick, I am eyeing off that font! h34r:

 

[Bizier]

$1500 is an absolute steal people.

 

[Tony]

Mate........ as a Leco...... it is my trade and social responsibility to post this!

Gunna miss ya!

Edit: Bloody hell mate....... I would give you $1500 for that SS wort chiller

 

[yardy]

To anyone who might be thinking about getting into this kind of setup I'll tell you straight, although it's a lot of fun putting this kind of build together yourself the costs add up real quick for every little nut & bolt you have to buy. I live in Perth but knowing what I do now about all these costs, I'd be hanging out for a setup like this to come along, I'd have pounced on it & had it shipped over without hesitation. I know some people have great skills for building these setups & have access to cheap parts & favours from mates but even then I doubt they could match the bang for buck this system offers. Great buy for some lucky *******.

Good luck with the sale

Thanks rb

Ridiculous value!

As real_beer says, the building is fun but the **** adds up real quick!

Good luck with the sale Yard but I am sure you will not need it, that is an awesome buy.


Please some one buy it quick, I am eyeing off that font! h34r:

I'll let you know about the font if you want, taps go with it as well mate.

$1500 is an absolute steal people.

it's robbery isn't it, but i need the shed space..

Mate........ as a Leco...... it is my trade and social responsibility to post this!

Gunna miss ya!

Edit: Bloody hell mate....... I would give you $1500 for that SS wort chiller

i wish you'd have said that earlier, it would be a no-chill brewery by now


just to clarify this, the price does not include the rambo and the blue cylindrical mash tun that was posted a couple of pages back.

you've still got everything you need in the sale at $1500 though.

cheers

 

[yardy]

Brewery is SOLD

Up for sale now is the Bar with an Andale Lucky 7 Flooded Font it has 2 Shirrons and a Micromatic tap, also included is a Fridgemate Temp Control, a Beer Gun (Pluto), 4 Kegs, Regulator there's also an old XXXX Tap, I'll throw a pic up later, there's other assorted stuff I'll post up as I go.

The kegs would probably be pick up only but the rest could be posted at buyers expense.

cheers

 

[real_beer]

Brewery is SOLD

Great news, I'm glad you haven't had to sell it off piece by piece, someone must be vey happy tonight

Cheers

 

[tipsy]

Sorry to see you taking an early retirement Yardster.
If your ever down this way............lets face it you will be soon hanging out for a quality HB.

 

[yardy]

Sorry to see you taking an early retirement Yardster.
If your ever down this way............lets face it you will be soon hanging out for a quality HB.

Not so much retiring, just simplifying things mate, I'm planning on doing the Vic trip next year so I might hold you to that

 

[yardy]

Brewery is SOLD

Up for sale now is the Bar with an Andale Lucky 7 Flooded Font it has 2 Shirrons and a Micromatic tap, also included is a Fridgemate Temp Control, a Beer Gun (Pluto), 4 Kegs, Regulator there's also an old XXXX Tap, I'll throw a pic up later, there's other assorted stuff I'll post up as I go.

The kegs would probably be pick up only but the rest could be posted at buyers expense.

cheers

Font

Regulator

Bar

Taps & Bamboo Handles

cheers