CraftBeerPI Brew Controller

[bluc]

I have v3 installed I have set a static ip on my pi but cannot get the web interface to connect. I see the craftbeerpi splash screen on my pi's boot screen. Is there something I need to enable or configure to get the web interface working?

 

[Alchomist]

It should be accessible in chrome at 10.0.0.xx:5000 (replace the xx with your RPi’s IP address )

Make sure you have v3.0

 

[bluc]

Yes I definately have v3.
I have now tried
http://192.168.1.69:5000
http://10.0.0.192.168.1.69
http://10.0.0.69:5000
then locally on raspberry pi browser
http://127.0.0.1:500
and finally
http://localhost:5000

Nothing works..

 

[bluc]

I got it sorted seems python was a bit off fixed it with the commands in this thread https://github.com/Manuel83/craftbeerpi/issues/197 by "Hootsbroklyn" cheers and thanks for helping..

 

[Alchomist]

I went through the same thing last year checking out v3.1_alpha, it set up a second IP address changing the address I had bookmarked.

 

[tumi2]

Check this out...
https://cbpi.mricesolutions.com/viewtopic.php?f=3&p=18
You probably need to install some requirements.

 

[snails07]

Has anybody here used CraftbeerPi to control a WiFi smart plug?
I see there is the TP-Link plugin but wondering if this is suitable to switch the element during PID operations - https://github.com/aravndal/TPLinkPlug

 

[jose luis Banegas]

[QUOTE = "Manuel, post: 1368635, member: 44687"] Hola,

Me gusta presentar mi controlador de infusión base Raspberry PI CraftBeerPI.

caracteristicas:

- Controla tantas teteras como quieras
- Control de hardware: agitador, calentador, bombas, válvulas
- Asistente de instalación
- Pasos de preparación flexibles
- Pasos automáticos y manuales
- Interfaz de usuario de teléfono inteligente, tableta y escritorio
- 3 logotipos automáticos de caldera estándar
- La lógica personalizada se puede implementar fácilmente
- Libro de recetas
- Tabla de temperaturas para cada caldera
- Soporte para conexión directa GPIO, PiFace o Gembird USB
- Soporte para Fahrenheit y Celsius
- ¡Gratis!

Sitio web: www.craftbeerpi.com
Facebook: facebook.com/craftbeerpi

Aclamaciones,
Manuel

[/CITAR]

Hi,

I like to present my Raspberry PI base brew controller CraftBeerPI.

Features:

- Control as many kettles as you like
- Hardware control: agitator, heater, pumps, valves
- Installation wizard
- Flexible brew steps
- Automatic and manual steps
- Smartphone, tablet and desktop user interface
- 3 standard kettle automatic logics
- Custom logics can be implemented easily
- Recipe book
- Temperatur chart for each kettle
- Support for direct GPIO, PiFace or Gembird USB Socket
- Support for Fahrenheit and Celsius
- Free!

Website: www.craftbeerpi.com
Facebook: facebook.com/craftbeerpi

Cheers,
Manuel

hello how are you, I am from santa cruz bolivia, I want to build a craftberr in a raspberry, the equipment will be 3 containers and I would like to control the agitator, 3 water pumps and solenoid valves for a gas system, you could help me to make it from the PCB board, until the programming. my email is [email protected], whatsapp +591 70842029
Thank you

 

[Dubzie]

Hop addition times...

Did my first brew over the weekend, i dont know if my hop additions were bugged, but i put them in how i normally did in my STC-1000 (60, 15,10, 5, 0)

The hop alerts did't pop up at the expected times. Is this the right way to add them?

 

[Wobbly74]

What boil logic are you using?

 

[Dubzie]

What boil logic are you using?

I was just using Hysteresis, next one will be the PIDBoil addon.

 

[Dubzie]

so 0 addition alert was as soon as the timer started. (10 min timer)
Hop 3 alert went off at 8mins...

 

[millsii]

so 0 addition alert was as soon as the timer started. (10 min timer)
Hop 3 alert went off at 8mins...

As you have found it is backwards to how you would normally refer to hop additions. The hop timings are minutes from start of boil.

 

[Dubzie]

As you have found it is backwards to how you would normally refer to hop additions. The hop timings are minutes from start of boil.

*sigh* well thats just silly...

 

[Wobbly74]

The good news is that you can actually code your own boil logic if you'd like to change it

 

[Drtmonster]

I hope this is the right place to ask this:

Does anyone have a full wiring diagram for an Australian brew panel using a CraftbeerPi? If not is there a PID style panel wiring diagram that is best to modify?

A list of parts would also be very helpful.

Thanks

 

[Dubzie]

The good news is that you can actually code your own boil logic if you'd like to change it

I think the boil logic is seperate from the boil step control, even after changing boil logic, the step control is the same

 

[Dubzie]

I hope this is the right place to ask this:

Does anyone have a full wiring diagram for an Australian brew panel using a CraftbeerPi? If not is there a PID style panel wiring diagram that is best to modify?

A list of parts would also be very helpful.

Thanks

http://web.craftbeerpi.com/hardware/

 

[Dubzie]

@Manuel any word on CBPi 4

 

[tranber28]

Sorry to disturb you

I am looking to buy a v2 card but I can not find and on the official Facebook page I have no answer! Do you have a link ?

Thank you Good day