Search results

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Y

    4 Tap, Flooded Font

    Does anyone know where to get a 4 Tap Flooded font and drip tray? At a good price... Or does anyone have one lying around they want to sell? (can be bigger than 4) Went to Andale today and even the price for a second hand ones without the drip tray are very expensive and of poor quality. I...
  2. Y

    Commercial Fridge - Fridgemate

    Just got my beer and keg fridge/coolroom finally conected. The internal fans keep going when the compressor stops. I would rather save electricity and have both switch off with the fridgemate I have. Just wondering is it ok to run a fridgemate on it?
  3. Y

    Commercial Fridge Re-gas, Kirby Compressor

    I have just got 2 commercial fridges. 1 does not cool, may be just a re-gas. The second needs the compressor reconnected (working when removed was external) Both are kirby compressors. Hom much would a re-gas roughly cost, and how much to get the other connected (and re gassed I guess) Just...
  4. Y

    Minute Rice, Flaked Corn

    Looking at doing a easy to drink beer for summer. Was going to make it along the lines of this, except different hops and lager yeast. I want to brew this on the weekend, so where can I get this stuff from. Im in Adelaide. Minute Rice, is this instant rice? or I have read you can get Lowens...
  5. Y

    Lager Recipe

    I did a partial early last year that was not to bad, but now that I have gone to all grain I want to do something the same. Coopers Lager Tin 1.5kg Pilsner 1.5kg Munich 1 20 grams Hallertauer @ 60 mins 30 grams Hallertauer @ 10 mins What would be the equivalent with all grain. Cheers, Youngy
  6. Y

    Tap Water

    Hi all, Going to do my third AG on the weekend. I have just made by Electric HLT which i am planning to use. It will be a 3 tier gravity system I will be using. Previously I used to used filtered water (fill a 30L cube from Kitchen) and used my boil kettle as my HLT. So lifting the cube and...
  7. Y

    Mash Tun, Warped, False Bottom

    Hi, Did my 2nd AG on the weekend and another stuck sparge!! Tipped all the grain out into a container, then I saw why this has done it again. The base of the esky has warped under the heat! The false bottom is not level on the base of the esky. What option's do I have to fix this. Put a...
  8. Y

    Stout Recipe - Southwark Old Stout

    Just looking at doing a stout, and I like the taste of Southwark Old Stout. Could someone point me in the direction of a AG recipe for a stout like Southwark Old Stout. Cheers,
  9. Y

    No Longer A Ag Virgin...

    Well I finally got there to do my first AG. I was lacking some equipment, but stuff it I have to just start brewing and get more gear as I go. Only one pot (100L aluminium), so that was the HLT and the Kettle. The Mash tun got the false bottom connected to the standard tap with some flexible...
  10. Y

    60l Fermenter

    just after a normal round plastic fermenter to hold a double 23 litre batch. Where can I get one? I am in Adelaide. Cheers.
  11. Y

    Fridge Size For 4 Kegs

    Just a quick question. What are the internal dimensions needed for a fridge to hold 4 kegs (CraftBrewer 18L)? ie 450mm width, 450mm depth, 700mm height Cheers, Youngy
  12. Y

    Party Key Integrated Co2

    Looking into a party keg, the old Spay bottle job. Was wondering if a soda stream bottle could be placed into the center tube some how (sealed of course). So, modify the center pump tube to house the soad stream bottle, maybe the 7L version. This would allow for a more portable setup. Just...
  13. Y

    100l Aluminum Pot, What Burner?

    Just picked up an 100L Aluminum Pot for $50 marked down from $140. :D I was thinking of starting AG using the BIAB method. Just wondering what burner I should be looking at? are the NASA ones too small for the 100L due to surface area? Also what regulator is needed and where to get them. I...
  14. Y

    Keg Shipment Adelaide

    I remember reading a post about someone in Adelaide getting a shipment of kegs, which would just about be in by now. I can't find the thread with the post. Does anyone know who was getting the kegs? Just after a few. Cheers, Youngy
  15. Y

    Ag Equipment Advice

    Hi, looking at going all grains, just wondering about the size of the gear I need. I am looking at doing double batch size of around 46L. I am looking at 40L urn for the HLT 38L Colman Cooler for the Mash Tun 60L SS or AL stockpot for the boiler Should this be ok? Cheers, Youngy
  16. Y

    Racked And Cc To Early?

    I racked my larger and while I was doing it I thought I would rack my ale? Brew Date: 18/09/2007 Tin: Coopers Canadian Blonde (8/8) Extra's: 1Kg Coopers BE1 100g Coopers LDM Yeast: SafAle US-05 Water: 2L Hot 19L Rain Water Original Gravity: 1048 Pitch Yeast: 22c after 40min...
  17. Y

    Summer Ale

    While I am waiting for my Larger to ferment, I thought I would do a quick ale batch in the second fermenter. Looking for a easy K&K. Some thing along the lines of the Alaskan Summer Ale. Cheers, Youngy
  18. Y

    Fist Brew In Years, Need Some Advice, Bavarian Larger

    This forum is great. Just getting back into the home brew and just wanted some help and advice for my first brew. I am going to try a Cooper Bavarian Larger. Ingredients, 1.7kg Coopers Bavarian Lager 1kg Coopers Brew Enhancer 1 500g Coopers Light Dry Malt Fermentation Is the yeast a larger...
  19. Y

    Andale Font, Need Nelp For Taps

    Hi all, New to this board and just about to start HB again after 5 years of non HB. Getting myself a keg setup to get me back into it. I have been given 2 Andale Fonts from a friend. Just wondering where to get some taps for it? and if I need and connections (snaplock). Cheers, Craig
Back
Top