As you have the threaded lock in adaptor...
this screws into the 3/4" FEMALE FRIDGE EXT.
These you can get from Lancer Pacific and you also need the SS nipple as well.
I should have both here if you are interested...
Only problem is these are for cool room panels - hence it has a plain unthreaded shank for the 1st 95mm befor the thread starts.
A cheaper option - and i am sure Ross has them ( he has pretty much all else) and get a John Guest bulk head fitting with female 3/4" BSP on one side and 10mm OD hose opening to fit in on the inside of the fridge door. That way you can push fit 6mm x 10mm line on it for the beer.
Then what you have will just screw in.
Hope this all makes sense...
I wouldn't put to much stock on the prices on the Andale site - I was looking for some other bits and it looks like random numbers in a few places.The poppet valves on the Andale site are a bit expensive ... LOL
http://www.andale.com.au/productListing.as...t=Home+Brew+Keg
$100 LOL ... I hope thats for a bag of 20!
Enter your email address to join: