Quantcast

Changing Regulator Cylinder Connector

Aussie Home Brewer

Help Support Aussie Home Brewer:

Quintrex

Well-Known Member
Joined
15/1/07
Messages
698
Reaction score
2
Hey guys
Almost got a basic keg setup together however the regulator that I have got is a Boc one that is a few years old and the connector on it is a slightly larger size than the thread on the CO2 bottle that I have. The regulator says it can be used with CO2.

Any ideas where I can get a replacement shank to replace the current one with the correct thread? Or anyone got an old busted reg that they are willing to part with so that I can scavenge the connector?

Cheers
Q
 

Quintrex

Well-Known Member
Joined
15/1/07
Messages
698
Reaction score
2
FWIW from a bit of googling I've done I think I need a 'type 30' thread to 1/4" bsp can anyone help with where to get one?

Q
 

Doogiechap

Burp..........
Joined
22/11/05
Messages
1,314
Reaction score
8
I know another AHB member who got a replacement nut recently from BOC for about $6 so they may stock the shanks as well if yours won't suit the replacement nut.
Cheers
Doug
 

Quintrex

Well-Known Member
Joined
15/1/07
Messages
698
Reaction score
2
I know another AHB member who got a replacement nut recently from BOC for about $6 so they may stock the shanks as well if yours won't suit the replacement nut.
Cheers
Doug
Ended up going to BOC and just got a replacement stem/connector for ~$30 .
Hooked it up and it works perfectly.

Niiiiice

One step closer to having a keg setup

Q
 

Latest posts

Top