Anofre
Well-Known Member
- Joined
- 14/11/08
- Messages
- 88
- Reaction score
- 0
This is the discussion topic for article: Doing it from absolute scratch
This is awesome!
Can you get "scratch" with yeast?
i hav'nt home malted but have played around with home roasting,it changes so much to the colour/expected taste etc.an interesting exercise as no doubt your home malting is.Just thought I would add my 2 cents in here. I have brewed around 10 batches made from home malted barley that I got from the feed store. I live in hot Queensland so I malt in my old fridge with a temp controller. I generally malt around 5kg ( a batches worth) at a time in a storage container at a depth of about 10cm and a temperature of 15 degrees. I then sundry the malt, seems to dry out well after a day but I give it 2 anyway and the roots just fall off.
I've made a few batches where I haven't roasted it and it's fine, although it is much better if roasted at 100 - 120 degrees for a number of hours. I have found through experimentation the potential of my grain is around 1.028 vs 1.036 for commercial grain. I use this value in beersmith and hit my calculated gravity every time.
Home malting is a fair bit of mucking around but it's great to brew up a batch and know you did most of the hard work!
Enter your email address to join: