The New Home Bar

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Excellent stuff GMK, I'd pull up a stool at your bar any day, looks like you'll have more beer choices than most brew pubs :party: .

Cheers
Andrew
 
Looks great GMK - I might have to arrange another trip south once it's completed... :D
 
Ross your on - always welcome - see if you can drag Andrew, Batz, and Hoops with you....
 
Careful GMK
I maybe closer than you think :beerbang:

Be pulling up a stool early next year !

Batz
 
Looks fantastic Ken certainly it will be the benchmark of a home bar setup!

My bar starts next week when I get my keg system. I have got some more ideas and a bit of inspiration from all the bars pictured.

Will be looking for a font and taps soon methinks.

LX
 
Ok - my Dad cam up this weekend and we installed the Nook.
He used 50mm x 140mm pine - jarah stained - french polished to seal and i di the varnishing - still need to do another coat..
Very Solid - will not move.

Here is a couple of Pics - still stuff to do...
the edge of the bar is on the left.

Nook1.jpg

And the other side.

Nook2.JPG
 
Love your work Ken...

I dare say you won't get out much when the bar is done!
 
Looking REALLY good Ken :super:

You're a hard act to follow - I should have pics of my new bar by next weekend - fingers crossed. Working flat out at the moment, getting everything finished...
 
I'm impressed!!!

Maybe you should teach the people at uni how to make a good bar! they need some lessons...
 
First ~ Teach them to brew really good Beer...

Second ~ Convince them they need a GMKenterprises Keg System and teach them how to instal the bought one.

Third ~ Teach them to Build the good BAR for serving the great BEER.

Fourth ~ Sit down and have a few...make sure you invite the Uni Girl Beer Goddesses... :rolleyes: :super:
 
nice work kens dad :D

dad done the work and ken did the brewinn? :D

no very nice after all you did inspire me to get on with mine .
now all we need is DOC or the MODS to get the bar gallery started so every one can show off ther bar rooms .
come on guys the forum is gunna need it if ross, GMK , DELBOY, and jason start giving every one inspiration . :beer:
del
 
looking good ken.now the wife will no where to find you .
looking like a wife conspiracy to keep the blokes home and outta the "other" pub and in there own pub. :D

cheers
big d
 
big d said:
looking good ken.now the wife will no where to find you .
looking like a wife conspiracy to keep the blokes home and outta the "other" pub and in there own pub. :D

cheers
big d
[post="90183"][/post]​

No foolin you bigd...
 
Bueatiful work G.M.K & dad...
But i'm with delboy get this gallery happening so we can show off our bars however bad they are....
 
Ok - just finished installing the bench in the fermentation/cellar room.
My FIL came up on the weekend and we installed it.

He is now making the shelving units and cupboards to go on top.

Thought i would share some pics..
MVC_027F.JPG

MVC_028F.JPG
 
OK - finally got teh 2 door fridge all plumbed.
It is working away now as we speak - hope it can get and 5 degrees...

Here are some pics.
fridege.JPG
The 2 door fridge with all the lines plumbed.

Gas_Manifold.JPG
close up of the six way gas manifold

lines_out.JPG
pic of the outside beerlines all wrapped in insulation

1st_beer.JPG
Ist beer from the tap.

Still need to connect up the glycol - add a 3 way in the fridge and a 3 way with liquid disconect for gassing outside the fridge.

Oh and stock the fridge.
 
Put up a couple of more things in the bar.

a lean on shelf on the wall by the door.
Any guesses on the 2 rubber backed beer mats?

Bar_shelf_top.JPG
and a view from Underneath
Bar_shelf_bottom.JPG

And i have added a Bar Bell - on the bar support the i will add a shelf to above the font back to the wall to hang glasses on upside down.
Barbell_Font.JPG
Still need to add some more shelves on the walls and get all the beer lights wired in.

But progress is being made. :super:
i can only currently get teh font "sweating", just cant get it iced up yet.

Ah well...
 
GMK said:
OK - finally got teh 2 door fridge all plumbed.
It is working away now as we speak - hope it can get and 5 degrees...

[post="106760"][/post]​


Grrrrrrr! Dirty Rotten Lucky Ba$t@&d.
 

Latest posts

Back
Top