-
If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.
You can become a Supporting Member or click here to donate.
Second-Hand Grain Mill EOIs
- Thread starter mtb
- Start date
Help Support Australia & New Zealand Homebrewing Forum:
4heckssake
Active Member
- Joined
- 1/1/17
- Messages
- 25
- Reaction score
- 4
if no local takers and you can (unpack the hopper maybe) get it all to adelaide for about $75 total, i'll be in. - cancel that - all sold i see
If anyone in Perth interested in a ghetto mill in a bucket so they can buy bulk malt and get into cheap BIAB I'll swap it for some decent local craft beer.
It's not fancy but it works. I've milled well over 100kg of malt with it and made many kegs of beer from the results. Runs nicely off a drill.
It's not fancy but it works. I've milled well over 100kg of malt with it and made many kegs of beer from the results. Runs nicely off a drill.
HaveFun
Well-Known Member
i’m still looking for a mill in the bne area :-(
guys get your mill on the marked hehe
guys get your mill on the marked hehe
Sold.
mralph1980
New Member
- Joined
- 5/12/17
- Messages
- 2
- Reaction score
- 0
Does anyone have a mill for sale in Sydney ??
- Joined
- 25/6/17
- Messages
- 57
- Reaction score
- 5
Looking for a mill in Victoria, option for postage too if it is affordable
- Joined
- 25/6/17
- Messages
- 57
- Reaction score
- 5
Everybody holding onto there old mills?
malt junkie
Well-Known Member
Keen to offload my old mill in the new year. I know my location won't make that a simple task, but the damn thing is taking up space in my spec's cupboard.
Batz
Batz Brewery...Hand crafted beers from the 'Batcav
- Joined
- 8/8/03
- Messages
- 12,735
- Reaction score
- 1,421
Second-hand mills have been selling for $45.00-$50.00 here. For that price I would stick it in the shed. You never know.
The $50.00 you will spend and have nothing to show for it, otherwise you have a nice mill you'll never use again.....that's me.
The $50.00 you will spend and have nothing to show for it, otherwise you have a nice mill you'll never use again.....that's me.
Let me know the details mate
For me selling the mill was less about recovering money and more about allowing someone else to get into brewing all grain at a low entry price. I prefer the thing to be actually used by someone. I'm a bit like that, I prefer use, reuse or repurpose, over hoarding, recycling or outright discarding.
If my only mill craps out, I'll see if someone nearby can help out until it's sorted. Hopefully, it won't come to that - the new MM seems like a solid bit of gear, certainly better build quality than the Ozito drill hooked up to it!
homebrewnewb
Well-Known Member
mtb
Beer Bod
- Joined
- 5/1/16
- Messages
- 1,736
- Reaction score
- 1,045
I have been known to swoop in and grab sweet gumtree deals.
Poop on cars occasionally too
Giveaway Marga Mill
Send me a 5kg satchel.
Served many years and the rollers are still knurled like new. Set for BIAB crush.
Marga out of the box came with a hand crank that slots into the side of the mill.
I got it straightened out and cut off to form a drill bit that I used in an Ozito variable speed corded drill on low speed. Perfect.
About six months ago the drill bit eventually reamed out the receiving female bit and was spinning. So I filled the hole with epoxy putty, jammed the drill bit back in and it worked ok, but a wee bit wobbly. So now instead of living in the drill, the shaft lives in the mill.
The bulk buy for the mini mill came up and couldn't be happier. Marga would be good for a beginner all grain brewer. Treat it carefully and you'd get a fair bit of use out of it.
Here's what you get.
On the mill, note the shaft that you fix your slow speed drill onto.
There's a clamp at the bottom that you use to attach the mill to a plank so the grain falls into a bucket. Put a big weight on the other end such as a gas bottle etc.
As follows:
You don't get the big hopper at the top, too big to post. Go to Bunnings and get the gutter leafguard thingo whatisit for a few dollars.
Treat it kindly, should get a few brews out of it.
edit photo no 2 was when the bit lived in the drill not the mill.
Send me a 5kg satchel.
Served many years and the rollers are still knurled like new. Set for BIAB crush.
Marga out of the box came with a hand crank that slots into the side of the mill.
I got it straightened out and cut off to form a drill bit that I used in an Ozito variable speed corded drill on low speed. Perfect.
About six months ago the drill bit eventually reamed out the receiving female bit and was spinning. So I filled the hole with epoxy putty, jammed the drill bit back in and it worked ok, but a wee bit wobbly. So now instead of living in the drill, the shaft lives in the mill.
The bulk buy for the mini mill came up and couldn't be happier. Marga would be good for a beginner all grain brewer. Treat it carefully and you'd get a fair bit of use out of it.
Here's what you get.
On the mill, note the shaft that you fix your slow speed drill onto.
There's a clamp at the bottom that you use to attach the mill to a plank so the grain falls into a bucket. Put a big weight on the other end such as a gas bottle etc.
As follows:
You don't get the big hopper at the top, too big to post. Go to Bunnings and get the gutter leafguard thingo whatisit for a few dollars.
Treat it kindly, should get a few brews out of it.
edit photo no 2 was when the bit lived in the drill not the mill.
BrockHops
Well-Known Member
Bribie, I would like this if still available pleeeeese!?
