New Perlick Taps!

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
OK, Point well made.

What length shanks?

I'll go back and get handle prices as well

I measured several household fridge doors they where all 2".
Even with the inside door panel 3" shanks give you enough thread without sticking out to much.
c1b
 
I agree with BYB that it would be awesome to at least get the taps at a discount (esp if the bulk buy is getting too complicated), although I do appreciate BlackFish's view too.

FYI - I've added mine and Budron's interest in 3" shanks to the list below. MrPolly can add his preference tomorrow.

Carboy - 1
tazman1967 - 2
Cocko - 2
Hogan - 4 (also 4 x 3" shanks, tails & handles)
Razz - 1
Eric8 - 2
Daemon - 2
Beersatan - 2
Baris - 2
Rudy - 4 (also in for 3" s/s shanks, handles and s/s tails if possible, depending on price).
Malbur - 2( plus Handles)
Supra-Jim - 5
Beers - 2 (also in for 3" s/s shanks, handles and s/s tails if possible).
canon1ball - 2 (also in for 3" s/s shanks, handles and s/s tails if possible).
kirem - 4 + handles
robbo5253 - 2
marky_mark - 2
stubbie - 4 (plus 4x handles, s/s shanks and tails)
Blackfish - 2 (also in for 3" s/s shanks, handles and s/s tails if possible)
Fatgodzilla - 2
Brendo - 4 (and poss shanks - depending on price)
Jimi - 1 (only if I can get the shank aswell. Would like tail and handle also if possible... ph34r.gif )
JonnyAnchovy - 1 (also in for shank, handle and tails).
Vitalstatistix - 4 (also in for 4 x shanks, 4 x handles & 4 x tails)
wilko - 1
Budron - 2 (and also in for 2x 3" shank and tails)
Archie82 - 1
foles - 2 (plus shanks and tails)
Rukh - 2 (plus handles, tails and 3" ss shanks)
yaks - 4
Bizier - 4 (+ handles and shanks if applicable)
Chops - 4 (+4 x handles, 4 x shanks & 4x tails)
mrpolly- 2 (plus shanks and tails + handles)
Jagerbrau -4 (+ handles)
GB-5 (+ 5 handles, 5 ss shanks, 5 tails.)
Syd_03 - 2( plus handles, ss shanks, ss tails)
real_beer - 4 + handles -----(4 x 3" shanks & tails depending on price).
 
I also have 2 fonts sitting around home. found this bb as i needed taps. went pricing the fatlock thingies and had a heart attack at what they would all cost, hence me being so happy with the work on this bulk buy.
So im now thinking i would go shanks as would then be able to spend what i save, on some other brew blind that i dont really need but still cant live with out...
 
I also have 2 fonts sitting around home. found this bb as i needed taps. went pricing the fatlock thingies and had a heart attack at what they would all cost, hence me being so happy with the work on this bulk buy.
So im now thinking i would go shanks as would then be able to spend what i save, on some other brew blind that i dont really need but still cant live with out...


Those fatlock thingies your talking about cost me $20 each from andale secondhand, not to pricy IMHO
 
If we can get shanks then I'd prefer 3 inch, but would be more than happy with 4 inch, I don't want to complicate this BB any further. I'm also be fine with the taps alone at this price.
 
If we can get shanks then I'd prefer 3 inch, but would be more than happy with 4 inch, I don't want to complicate this BB any further. I'm also be fine with the taps alone at this price.


Is it $37 plus postage??

And is it too late to get on the list would love to order 4 if i could (hopefully the ship hasnt sailed)

Cheers

Just pmed peteoz fingers crossed!
 
im adding my name to the list in the hope i can join the bulk buy.

Carboy - 1
tazman1967 - 2
Cocko - 2
Hogan - 4 (also 4 x 3" shanks, tails & handles)
Razz - 1
Eric8 - 2
Daemon - 2
Beersatan - 2
Baris - 2
Rudy - 4 (also in for 3" s/s shanks, handles and s/s tails if possible, depending on price).
Malbur - 2( plus Handles)
Supra-Jim - 5
Beers - 2 (also in for 3" s/s shanks, handles and s/s tails if possible).
canon1ball - 2 (also in for 3" s/s shanks, handles and s/s tails if possible).
kirem - 4 + handles
robbo5253 - 2
marky_mark - 2
stubbie - 4 (plus 4x handles, s/s shanks and tails)
Blackfish - 2 (also in for 3" s/s shanks, handles and s/s tails if possible)
Fatgodzilla - 2
Brendo - 4 (and poss shanks - depending on price)
Jimi - 1 (only if I can get the shank aswell. Would like tail and handle also if possible... ph34r.gif )
JonnyAnchovy - 1 (also in for shank, handle and tails).
Vitalstatistix - 4 (also in for 4 x shanks, 4 x handles & 4 x tails)
wilko - 1
Budron - 2 (and also in for 2x 3" shank and tails)
Archie82 - 1
foles - 2 (plus shanks and tails)
Rukh - 2 (plus handles, tails and 3" ss shanks)
yaks - 4
Bizier - 4 (+ handles and shanks if applicable)
Chops - 4 (+4 x handles, 4 x shanks & 4x tails)
mrpolly- 2 (plus shanks and tails + handles)
Jagerbrau -4 (+ handles)
GB-5 (+ 5 handles, 5 ss shanks, 5 tails.)
Syd_03 - 2( plus handles, ss shanks, ss tails)
real_beer - 4 + handles -----(4 x 3" shanks & tails depending on price).
cozmocracker - 4 (plus handles, tails and 3" shanks)
 
Unfortunately, I'm pulling out of the bulk buy since there seems to be enough interest to replace me. Hope all goes well for you guys.


Carboy - 1
tazman1967 - 2
Cocko - 2
Hogan - 4 (also 4 x 3" shanks, tails & handles)
Razz - 1
Eric8 - 2
Daemon - 2
Beersatan - 2
Baris - 2
Rudy - 4 (also in for 3" s/s shanks, handles and s/s tails if possible, depending on price).
Malbur - 2( plus Handles)
Supra-Jim - 5
Beers - 2 (also in for 3" s/s shanks, handles and s/s tails if possible).
canon1ball - 2 (also in for 3" s/s shanks, handles and s/s tails if possible).
kirem - 4 + handles
robbo5253 - 2
marky_mark - 2
stubbie - 4 (plus 4x handles, s/s shanks and tails)
Blackfish - 2 (also in for 3" s/s shanks, handles and s/s tails if possible)
Fatgodzilla - 2
Brendo - 4 (and poss shanks - depending on price)
Jimi - 1 (only if I can get the shank aswell. Would like tail and handle also if possible... ph34r.gif )
JonnyAnchovy - 1 (also in for shank, handle and tails).
Vitalstatistix - 4 (also in for 4 x shanks, 4 x handles & 4 x tails)
wilko - 1
Budron - 2 (and also in for 2x 3" shank and tails)
Archie82 - 1
foles - 2 (plus shanks and tails)
Rukh - 2 (plus handles, tails and 3" ss shanks)
yaks - 4
Bizier - 4 (+ handles and shanks if applicable)
Chops - 4 (+4 x handles, 4 x shanks & 4x tails)
mrpolly- 2 (plus shanks and tails + handles)
Jagerbrau -4 (+ handles)
GB-5 (+ 5 handles, 5 ss shanks, 5 tails.)
Syd_03 - 2( plus handles, ss shanks, ss tails)
real_beer - 4 + handles -----(4 x 3" shanks & tails depending on price).
cozmocracker - 4 (plus handles, tails and 3" shanks)
Scotsman06- 4
 
Carboy - 1
tazman1967 - 2
Cocko - 2
Hogan - 4 (also 4 x 3" shanks, tails & handles)
Razz - 1
Eric8 - 2
Daemon - 2
Beersatan - 2
Baris - 2
Rudy - 4 (also in for 3" s/s shanks, handles and s/s tails if possible, depending on price).
Malbur - 2( plus Handles)
Supra-Jim - 5
Beers - 2 (also in for 3" s/s shanks, handles and s/s tails if possible).
canon1ball - 2 (also in for 3" s/s shanks, handles and s/s tails if possible).
kirem - 4 + handles
robbo5253 - 2
marky_mark - 2
stubbie - 4 (plus 4x handles, s/s shanks and tails)
Blackfish - 2 (also in for 3" s/s shanks, handles and s/s tails if possible)
Fatgodzilla - 2
Brendo - 4 (and poss shanks - depending on price)
Jimi - 1 (only if I can get the shank aswell. Would like tail and handle also if possible... ph34r.gif )
JonnyAnchovy - 1 (also in for shank, handle and tails).
Vitalstatistix - 4 (also in for 4 x shanks, 4 x handles & 4 x tails)
wilko - 1
Budron - 2 (and also in for 2x 3" shank and tails)
Archie82 - 1
foles - 2 (plus shanks and tails)
Rukh - 2 (plus handles, tails and 3" ss shanks)
yacks-4Scotsman06- 4(plus handles)
Bizier - 4 (+ handles and shanks if applicable)
Chops - 4 (+4 x handles, 4 x shanks & 4x tails)
mrpolly- 2 (plus shanks and tails + handles)
Jagerbrau -4 (+ handles)
GB-5 (+ 5 handles, 5 ss shanks, 5 tails.)
Syd_03 - 2( plus handles, ss shanks, ss tails)
real_beer - 4 + handles -----(4 x 3" shanks & tails depending on price).
cozmocracker - 4 (plus handles, tails and 3" shanks)



Ill put my name down officially to take yaks taps.
 
how about going in order on the list! no jumping the que.


I spoke to peteoz and told me to watch for cancellations and take them when they arise, dont wanna get pissy at anyone.
I figured if you were on the list you were in the order just using up a previous AHB users order.
 
Ive been trying to get a reply since 100 mark as to how many i can order. dont think the que thing is working.
wouldnt mind knowing so can leave correct cash handy
 
well lets hope the 100 mark is not set in concrete and everybody can get shiny new toys to play with!
 
ok

I just saw this. no time to read the whole thing.

Quick question........ can I still join the buy?

cheers
 
ok

I just saw this. no time to read the whole thing.

Quick question........ can I still join the buy?

cheers

Tony, last time I spoke to Pete he said its was definately going to be cut off at 100. He's on hols up in QLD until next week. Maybe see what he says when he has a chance.
Cheers
Steve
 
hey tony put your name down and in the end they will let you know if you can play or not.
 
Ahhh i will get em from the US off evil bay but get the creamer model.

Enjoy folks.

Cheers
 

Latest posts

Back
Top