Mongolian burner what plug to use and where from?

[brad81]

Hi all,

I have a 32jet mongolian burner that I am using with a 60l pot. I want to remove some jets, and plug others up in an attempt to reduce the amount of LPG I use.

I've been to Auscrown, Bunnings, Masters and Reece Plumbing. At Reece they didn't have anything matching the thread used. I spoke to the tech at Auscrown in Mitcham, and after he made a few enquiries with their suppliers, they'd have to have them machined and ordered in a large quantity.

Has anyone here successfully sourced some plugs for their burner? If so, where from?

Thanks in advance.

Brad

 

[QldKev]

http://aussiehomebrewer.com/topic/4533-mongolian-burner-problems/?p=46043

 

[brad81]

Cheers for that Kev, I'll check it out on the weekend!

Ashers post: FYI: I blocked them by taking out the nozzle and replacing with a bolt. I used the nut to lock the bolt in place. Used high temp exhaust silicon on the thread to seal.
Bolt size is 5/16 UNF - Supercheap auto stocks them...