FS : [MEL] Thermowells, ball lock QD's, temp controller, pump, mot

[andytork]

Going through the garage again, found lots of stuff again

(attached some generic pictures for the picture police) - All items are as seen / described


weldless thermowells,

I have 5 of the following, 100mm length (protrusion), 3/4" hole required


$35 each posted, or $25 pickup

Temp Controller

1 x temp controller, $20 Posted or $10 pickup


GAS QD MFL
5x threaded GAS QD , light use, $30 Posted or $20 pickup




BEER QD MFL
7x threaded BEER QD , light use, $40 Posted or $30 pickup



MAG DRIVE PUMP

Threaded mag drive pump with stainless hole tails, probably has under 2 hours use, it was my keg filling pump when doing tripple batches, $40 Posted or $30 pickup



Motorised ball valves
4 of 5 wire, 1/2 full bore stainless $35 each posted, $25 pickup



As stated, any item can be picked up from Boronia, I work around Hawthorn East so can arrange collect / meeting there

Andy

 

[TerritoryBrew]

Hi, interested in the motorised ball valves. Can you please send the make/model of these.

PM about the thermowells.

 

[Benn]

Pm'd re: pump & 1x thermowell if available.

 

[andytork]

Hi, interested in the motorised ball valves. Can you please send the make/model of these.

PM about the thermowells.

The ball valves : I imported them a while ago, used them on my automated brewery, I had to buy 10, these are the leftovers

Basically 5 wire,

2 for motor and 3 for the position sensor, (open / closed / common)

They are 12 Volt DC versions, I used basic relay boards with arduiono for this

Sent message regarding thermowells too

 

[andytork]

Pump and a few thermowells now gone, still got a few thermowells

open to reasonable offers on the other stuff, will combine postage etc of course if you want more than one item

 

[GNU]

What suburb are you in?

 

[andytork]

What suburb are you in?

Boronia

 

[GNU]

I'll grab the temp controller unit if still available and does heat and cool devices. I'm in the basin and available for pickup. Pm me

 

[andytork]

I'll grab the temp controller unit if still available and does heat and cool devices. I'm in the basin and available for pickup. Pm me

Message sent

 

[andytork]

Still got

2x thermowells
Most of the QD's left.

4x motorised ball valves

and just found a bag of of 14 x 40mm PTFE coated magnetic stir bars too , $30 for the bag posted

 

[andytork]

Still have the following, cleaning out as we are moving.

Thermowells
2 x Thermowells, $25 each posted

QD's
6 x Threaded Liquid QD's
2 x Barbed Liquid QD's
3x Threaded Gas QD's
4x Barbed Gas GD


15 In total , $50 posted for the lot, will include 10 or JQ fittings with these.

Stir Bars

Bag of 14 x 40mm PTFE coated magnetic stir bars - $30 Posted

Will do all of the above for $100 Posted or $90 Pickup Boronia Vic