ForSale : 3 vessel Brewrig (75lt pots)

[gava]

Up for sale is a three vessel brewtroller controlled brew rig
Rather sell all together - Pickup Bendigo

$1,500 ono

Output volume MAX : 48-50lt
Min brew level : 25lt (this is due to the elements being to high in the kettle)
Power consumtion : 40amps (1x20amp, 2x10amp) This can be modified within the 240v box or plug up holes and make into gas fired
Controller : 12v box with brewtroller 20x4 Char LCD on/off/auto switches

Brewtroller features That I use.
- Auto fill HLT to desired level and start to heat water
- Auto fill MLT with desired water (Must be a certain way good once worked out)
- Preheat HEX pot then change over to other temp probe when mashing. (HERMS has two probes)
- PID controlled MASH temp with timer with step mashing functions (with HERMS)
- Auto mash out, ramps up to mash out temp then starts mash out timer
- Boil timers and hop addition alarms
- Store recipes or just run manually

if you dont like brewtroller I'm sure it wouldn't be hard to connect up to standalone PID controllers
a loose breakdown of bits

HLT
Weldless Bulkhead
Ball Valve
Camlock
Cheap 75lt chinese pot
2200watt weldless element (on/off/auto)
Thermowell + probe
Bubbler water level sensor tube
Water IN connecting to a solenoid which is controlled (on/off/auto)


MLT
Weldless Bulkhead
Ball Valve
Camlock
Robinox 70lt Pot
False bottom (large)
Wort return with Camlock


Kettle
Weldless Bulkhead
Ball Valve
Camlock
Robinox 70lt Pot
Bubbler water level sensor tube
Dual 2200watt weldless elements (on/off/auto)

HERMS
8mt Copper coil
Camlock fittings
2400watt kettle element (on/off/auto)

Pump
1 x March 809 pump

Cooler
DIY made counter flow chiller 8mt copper connects to a solinoid for on/off/auto
Other
12v Control box
240v Stainless steel control box , 1x20amp 2x10amp plugs (can be modified easily)
three hoeses with camlocks
Brewtroller 4.0 Pro Control unit
1-wire temp control card
Switches on/off/auto
60lt fermenter and some 23lts if you want them.
Keg Cleaner + bucket (pond pump with copper and beer in connection)
Bubbler level control box
refractometer
****** stand


Pictures to come.

 

[djar007]

Dibs on the march pump if you split her up mate .

 

[gava]

This is a early picture of it, mostly the same still (shows two pumps only have one I was testing the green one for a mate)

 

[WarmBeer]

You getting out of the game, or upgrading to a Braumeister like everybody else, mate?

 

[gava]

Not getting out of the game, just down sizing some stuff and getting some extra splash money

 

[Grainer]

If u Split id be interested in the herm-it

 

[gava]

12v Box with Brewtroller and control switches.
The Kettle Elements can be controlled separately, so you can turn the bottom on while the wort fills the kettle then turn the 2nd on when it covers the top element.

240v Case, This is a sealed Stainless steel case with all the 240v kit in it.
Can be modified easily to suit you.

 

[Yob]

Blingin **** mate, top Price too.

 

[gava]

just gave it a bash of PWB last night cleaned up all the bits and bobs ready for inspection..
Hmm, shinny..

 

[JDW81]

That is one bling brew rig. Makes my gear look like it came from the scrap heap. Absolute steal at $1500 too. Good luck with the sale.

 

[gava]

Ok people sale fell through so I thought I'd offer up items.

NOTE: If i don't get bids on enough items I'm not going to sell, Not everything will be up for offer since I will keep some items for my new rig.
!First in!

Items Up for offer and prices.

HLT (See first post for info)
$120

MLT (See first post for info)
$300

KET (See first post for info)
$320

HERMS Pot (See first post for info)
$110

Brewtroller 12v and 240v Box electronics
$150

Happy Shopping.

Cheers

Gavin.

 

[mxd]

Ok people sale fell through so I thought I'd offer up items.

NOTE: If i don't get bids on enough items I'm not going to sell, Not everything will be up for offer since I will keep some items for my new rig.
!First in!

Items Up for offer and prices.

HLT (See first post for info)
$120

MLT (See first post for info)
$300

KET (See first post for info)
$320

HERMS Pot (See first post for info)
$110

Brewtroller 12v and 240v Box electronics
$150

Happy Shopping.

Cheers

Gavin.

I'm interested in the brewtroller

will it work for my set-up (current may change)

I run a 10A and 15 A to my setup (all 240V)

HLT is an immersion elememt
HX (HERMS) is a kettle
1 pump

I currently run the HX with a PID, control the HLT element and pump with a power point

 

[gava]

I'm interested in the brewtroller

will it work for my set-up (current may change)

I run a 10A and 15 A to my setup (all 240V)

HLT is an immersion elememt
HX (HERMS) is a kettle
1 pump

I currently run the HX with a PID, control the HLT element and pump with a power point

With some adjustment of the 240v box this wouldn't be an issue. The 12v control box is wired back to the 240v and its SSR so you'll just have to move a few wires, Put a 15amp plug on the 20amp cable. Just depends how good I've set it up and how good you are at understanding it

 

[gava]

HEX

MLT

BOIL KETTLE

 

[real_beer]

Ok people sale fell through so I thought I'd offer up items.

NOTE: If i don't get bids on enough items I'm not going to sell, Not everything will be up for offer since I will keep some items for my new rig.
!First in!

Great looking rig gava!

One thing I'll say mate is if you wait a little longer I'm sure someone just getting ready to move to a full setup wont be far away. You only listed it recently so a couple of weeks waiting for the right buyer might be worth it.
Always a such a shame to see these systems broken up piecemeal after someones laboured lovingly on their creation.

Good luck

 

[gava]

it was fun building but i must move on.. TO ANOTHER ONE!

 

[gava]

plus not many people show interest in single items so I'll also take full purchases anyway..

 

[real_beer]

plus not many people show interest in single items so I'll also take full purchases anyway..

Too true I'm afraid. But if people just starting out now could look into the future and see how much money they were about to shell out in bits & pieces, rigs like yours would be sold within 5 minutes of being posted. Live, spend & learn I suppose . Hope you get your $1500 one way or another.

 

[AJ80]

PM sent for the HLT.

 

[berto]

Hey mate.
What's included in the brewtroller kit?
Bubbler setup and temp probes?

Easily adaptable for rims? Looking at a 3v build now

Sent from my ASUS Transformer Pad TF300T using Tapatalk now Free