EOI PRESSURE RELIEF VALVE.

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Mardoo 3
Droopy Brew 3
Shadime 2
Rambo 2
Yuz 2
Haciluka 3
breaky 2
Fat Drew 2
Dan Pratt 2
Mister Clark 6
sbowler 2
Digga 3
Yochris77 2
Maheel = 2
Hophead2 - 2
RamuGupta 2
Gezzanet 2
Midnight brew 2
Old bloke 2
Mr B 3
Bingggo 2
Fro-Daddy 2
leahy268 2
Leyther 2 please
joell 2
Graybo 2
Lakey 2
 
Mardoo 3
Droopy Brew 3
Shadime 2
Rambo 2
Yuz 2
Haciluka 3
breaky 2
Fat Drew 2
Dan Pratt 2
Mister Clark 6
sbowler 2
Digga 3
Yochris77 2
Maheel = 2
Hophead2 - 2
RamuGupta 2
Gezzanet 2
Midnight brew 2
Old bloke 2
Mr B 3
Bingggo 2
Fro-Daddy 2
leahy268 2
Leyther 2 please
joell 2
Graybo 2
Lakey 2
Sidney Harbour-Bridge 1
 
WEAL, when do you think you'd be placing the order?
Thanks :)
 
Droopy Brew 3
Shadime 2
Rambo 2
Yuz 2
Haciluka 3
breaky 2
Fat Drew 2
Dan Pratt 2
Mister Clark 6
sbowler 2
Digga 3
Yochris77 2
Maheel = 2
Hophead2 - 2
RamuGupta 2
Gezzanet 2
Midnight brew 2
Old bloke 2
Mr B 3
Bingggo 2
Fro-Daddy 2
leahy268 2
Leyther 2 please
joell 2
Graybo 2
Lakey 2
Sidney Harbour-Bridge 1
Running total 61
 
Droopy Brew 3
Shadime 2
Rambo 2
Yuz 2
Haciluka 3
breaky 2
Fat Drew 2
Dan Pratt 2
Mister Clark 6
sbowler 2
Digga 3
Yochris77 2
Maheel = 2
Hophead2 - 2
RamuGupta 2
Gezzanet 2
Midnight brew 2
Old bloke 2
Mr B 3
Bingggo 2
Fro-Daddy 2
leahy268 2
Leyther 2 please
joell 2
Graybo 2
Lakey 2
Sidney Harbour-Bridge 1
zwitter 2
themonkeysback 2

Running total 65
 
I read via a Brulosophy link that a similar looking valve isn't that precise in turns of the number on the twist dial representing the actual pressure it sustains, but as long as it's consistent I don't mind. Eg. set the valve to 30psi but the pressure gauge will hold 15psi steady.
 
I read via a Brulosophy link that a similar looking valve isn't that precise in turns of the number on the twist dial representing the actual pressure it sustains, but as long as it's consistent I don't mind. Eg. set the valve to 30psi but the pressure gauge will hold 15psi steady.

I would agree. You can’t trust the number scale on it. But they are accurate, just use the pressure gauge as a guide.
 
ive never trusted measuring things that extend out with a ruler ......

i just prefer to overestimate
 
RE: 1/4 NPT to BSP connection - for a relatively small thread and since both are tapered I'd imagine a bit of Teflon tape would make up for the thread pitch / profile and dimensions.
In saying that, there are 1/4 NPT Tees available for a couple of dollars off ebay (304 SST); Also 60PSI NPT threaded Gauges. To finish it off - just a matter of finding a 1/4 NPT male to barb and the whole set up would be "proper".
Anyway, should be an interesting exercise :)
 
Got dropped off the list somehow, anyway 3 for me please.
 
Droopy Brew 3
Shadime 2
Rambo 2
Yuz 2
Haciluka 3
breaky 2
Fat Drew 2
Dan Pratt 2
Mister Clark 6
sbowler 2
Digga 3
Yochris77 2
Maheel = 2
Hophead2 - 2
RamuGupta 2
Gezzanet 2
Midnight brew 2
Old bloke 2
Mr B 3
Bingggo 2
Fro-Daddy 2
leahy268 2
Leyther 2 please
joell 2
Graybo 2
Lakey 2
Sidney Harbour-Bridge 1
zwitter 2
themonkeysback 2
Ferg 3
Jez 2

Running total 70
 
So everyone is aware of what they are getting in to, can someone list other bits we will need to get this working?
 
Can you put me down for 2 please?

Droopy Brew 3
Shadime 2
Rambo 2
Yuz 2
Haciluka 3
breaky 2
Fat Drew 2
Dan Pratt 2
Mister Clark 6
sbowler 2
Digga 3
Yochris77 2
Maheel = 2
Hophead2 - 2
RamuGupta 2
Gezzanet 2
Midnight brew 2
Old bloke 2
Mr B 3
Bingggo 2
Fro-Daddy 2
leahy268 2
Leyther 2 please
joell 2
Graybo 2
Lakey 2
Sidney Harbour-Bridge 1
zwitter 2
themonkeysback 2
Ferg 3
Jez 2
Wobbly74 2

Running total 72
 
Last edited:
IMG_7703.jpg
 

Latest posts

Back
Top