EOI PRESSURE RELIEF VALVE.

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
OK got a price for 50 is $5.15 USD but I think I am conversing either with a robot or different people 3 times now I have asked for shipping costs, I will ask again when I reply if you could check what the
shipito costs that would be great total weight for 50 is 3.5 kg

$56 with insurance seems to be the cheapest, I was expecting better tbh...
 

Attachments

  • shipito-prv.jpg
    shipito-prv.jpg
    164.2 KB
I should add, that is delivered from Hawthorne, CA 90250, so they would need to get there first.
 
Now I really need the spunding valve since I just ordered a fermentasaurus.
 
Originally said 3 but at that price I'll take 6 please.

Thanks in advance!
 
Yeah ill get 3 now if you still have spots!
 
Running list
Far side of crazy 3
Mardoo 3
Droopy Brew 3
Shadime 2
Rambo 2
Yuz 2
Haciluka 3
breaky 2
Fat Drew 2
Dan Pratt 2
Mister Clark 6
sbowler 2
Digga 3
Yochris77 2
 
Sorry didn't see above. Don't mind me I'm keen!
Thanks Yochris77
 
Running list
Far side of crazy 3
Mardoo 3
Droopy Brew 3
Shadime 2
Rambo 2
Yuz 2
Haciluka 3
breaky 2
Fat Drew 2
Dan Pratt 2
Mister Clark 6
sbowler 2
Digga 3
Yochris77 2
Maheel = 2
 
Running list
Far side of crazy 3
Mardoo 3
Droopy Brew 3
Shadime 2
Rambo 2
Yuz 2
Haciluka 3
breaky 2
Fat Drew 2
Dan Pratt 2
Mister Clark 6
sbowler 2
Digga 3
Yochris77 2
Maheel = 2
Hophead2 - 2
 
2 for me please

So updated list

Running list
Far side of crazy 3
Mardoo 3
Droopy Brew 3
Shadime 2
Rambo 2
Yuz 2
Haciluka 3
breaky 2
Fat Drew 2
Dan Pratt 2
Mister Clark 6
sbowler 2
Digga 3
Yochris77 2
Maheel = 2
Hophead2 - 2
RamuGupta 2
 
Im interested to see how these go so I'll definitely be keeping an eye on this thread. I'd get one immediately through this page but after trying the KK Spunding valve, I went with a tire pressure relief valve that was stuck onto a mfl disconnect via some heavy duty silicone tubing (9.5mm) and some stepless clamps. It works for me as it doesn't have any working parts that can gum up with krausen during an active pressure ferment ( I pressure ferment at 18C' at 15PSI and later 27PSI for carbonating at 2.5 volumes) but I have to plug the spunding disconnect onto my CO2 cylinder to dial in ans set and pressure changes which is a bit of a pain. Best of luck with these, they look great!

Mitch - Craftbrewer.
 

Latest posts

Back
Top