Ebay, Gumtree and FB Marketplace

[Lionman]

http://www.ebay.com.au/itm/Vintage-...196562?hash=item3d436c9cd2:g:k88AAOSwRGdZcdCd

This seller has some Mytton Rodd kegs for sale in Melbourne, might go pretty cheap.

 

[Pnutapper]

http://www.ebay.com.au/itm/Vintage-...196562?hash=item3d436c9cd2:g:k88AAOSwRGdZcdCd

This seller has some Mytton Rodd kegs for sale in Melbourne, might go pretty cheap.

Only a CO2 inlet post on the pictured one, and his others don't have any posts. I wonder if they have pick up tubes?

 

[Mardoo]

We'll not right now..... but later .... can we have big ceremony, with lots of craft on tap!

God, can you imagine the wedding of two homebrewers?

 

[homebrewnewb]

well to be honest i "craft on tap" most nights, sooo
my body is ready.

 

[Lionman]

http://www.ebay.com.au/itm/292201751570

two of those plus teh PINCH code works out to be about 65 each for 2 used kegs delivered which isnt too bad these days. Not a huge saving though really.

Edit, actually those are 'short type' 19L kegs. Whats the deal with them? Are they wider?

 

[Nullnvoid]

I'm about to pull the trigger on a keg! Was meant to go to keg king today but have been sick. Maybe this ebay might be an alternative!

 

[nosco]

Some possible deals to be had here. I like the look of those coils. Ivanhoe VIC.

https://www.gumtree.com.au/s-ad/iva...er&utm_medium=email&utm_campaign=saved_search

 

[lickapop]

10l Brau

https://www.gumtree.com.au/s-ad/nome/other-appliances/braumeister-10l-beer-brew/1156375167

 

[stevonz]

brewing gear : https://www.gumtree.com.au/s-view-details.html?adId=1156610689

 

[mtb]

brewing gear : https://www.gumtree.com.au/s-view-details.html?adId=1156610689

Dreamin'

This guy is asking for retail - or above retail - price on some of this stuff.

 

[stevonz]

140L boiler https://www.gumtree.com.au/s-ad/upper-coomera/antiques/milk-sterilizer-beer-brewer/1156655994

 

[malt junkie]

140L boiler https://www.gumtree.com.au/s-ad/upper-coomera/antiques/milk-sterilizer-beer-brewer/1156655994

Not 140L your taking into account the jacket as part of the volume (closer to100L) and you'd likely need a dedicate 15amp circuit and lots of cleaning. The internal seam looks a worry too.

 

[Grott]

Same here laxation but at that price and delivery I bought one to add my other 6!

Ordered Thursday and arrived just after 2pm today. No, of course it wasn't Australia Post. Fastway Couriers did a good job. ( no affiliation)

 

[laxation]

From memory, Fastway was responsible for the other speedy delivery - with the Headmaster glasses. Will keep that in mind!

 

[Digga]

Keg for the Melbourne folk.
http://www.ebay.com.au/itm/172819995631

 

[abyss]

Ordered Thursday and arrived just after 2pm today. No, of course it wasn't Australia Post. Fastway Couriers did a good job. ( no affiliation)

I just received my 19l job and the out post won't take any of my disconnects.
Also the gas post has the short tube glued in so the poppet can't be removed.
I've emailed the seller and asked for a new pair of posts.

 

[Batz]

I just received my 19l job and the out post won't take any of my disconnects.
Also the gas post has the short tube glued in so the poppet can't be removed.
I've emailed the seller and asked for a new pair of posts.

The gas post will have a short tube, I think it will be stuck to the o ring and not glued in. Did you add some lube to the posts?

 

[abyss]

The gas post will have a short tube, I think it will be stuck to the o ring and not glued in. Did you add some lube to the posts?

Yea I pulled them off to clean and lube.
In the photo I have replaced the top original post with the one on the keg.
I had the gas post in the vice and couldn't remove the short stainless tube with multi grips without ******* it.
The keg itself looks nice enough for the price.

 

[Grott]

Interesting, my 9.5litre keg had a fault as well. The pressure release valve would not budge. Removed it to note the spring had no movement at all and think it may be a poppet spring? Anyway replaced and all good.
At the price no complaints here but interest to see if others have problems.

 

[Mardoo]

Interesting, my 9.5litre keg had a fault as well. The pressure release valve would not budge. Removed it to note the spring had no movement at all and think it may be a poppet spring? Anyway replaced and all good.
At the price no complaints here but interest to see if others have problems.

Exact same problem on my PRV's, no movement at all in the PRV, but I haven't had a chance to disassemble yet.