Ebay, Gumtree and FB Marketplace

[abyss]

Exact same problem on my PRV's, no movement at all in the PRV, but I haven't had a chance to disassemble yet.

My PSV in the lid is very tight also but I'm still happy with the keg. It will be full of beer in the morning so time will tell.

 

[Digga]

I also have had some issues with the 2 I purchased.

1. Keg arrived with dent in the side

I know that it probably wasn't the sellers fault and was done in transit. They compensated with $20 refund or offered disconnects, clamps and line.

2. PRV's are VERY tight. To the point of near useless.

3. Beer out post seems short for some of my disconnects but 1 out of 3 that I tried seems to be working. Have only tried 1 of the 2 kegs so far as 1 has beer that is naturally carbing in it. Gas posts are both fine.

4. Lids seem to need assistance in centering and are annoying.

Other than that they look to be constructed well, nice welds etc.

 

[zensome]

4. Lids seem to need assistance in centering and are annoying.

I have the same issue with mine, but everything else is AOK.

 

[laxation]

10x taps in SA, could go cheap

http://www.graysonline.com/lot/0235...ensing-taps-with-adaptors-pooraka-sa?spr=true

 

[Helles]

https://www.gumtree.com.au/s-view-details.html?adId=1090783695

They're in Point Cook
Went and had a look today quality looks good to me
Next month they will have bigger 143lt 170lt 198lt
I ordered 130lt MT 143lt HLT 170lt Kettle
No price on the larger ones just yet

 

[technobabble66]

Not on eBay or gumtree, but bunnings have cubes on special at the moment.
20Ls are $15.

 

[Reedy]

BRIS - couple of nice looking beer light boxes (Little Creatures & Monteiths)

http://www.gumtree.com.au/s-ad/bris...aign=socialbuttonsVIP&utm_content=app_android

Price: $500 Negotiable

 

[Reedy]

Gold Coast - 30L FastFerment Conical

http://www.gumtree.com.au/s-ad/coom...aign=socialbuttonsVIP&utm_content=app_android

Price: $130

 

[Lionman]

My PSV in the lid is very tight also but I'm still happy with the keg. It will be full of beer in the morning so time will tell.

Yeah I got one. PRV is super tight, Might need to change the spring in it I think. nearly destroy the ring pull trying to vent the bloody thing.

I noticed the rubber is pretty smelly, not sure if that's normal for new kegs or not.

I gave it a good clean with na perc and star san and its full of lager now.

 

[andyt23]

https://www.gumtree.com.au/s-ad/croftby/miscellaneous-goods/home-brew-kit/1158328607
Ipswich QLD, Everything you need to brew into a keg, including CO2 bottle, for $150. That's a steal!!

 

[Mardoo]

Yeah I got one. PRV is super tight, Might need to change the spring in it I think. nearly destroy the ring pull trying to vent the bloody thing.

I compared the spring to another PRV and they used the wrong spring. It's the right length, but the gauge of the wire is much heavier, which means the resistance is much greater.

This means the PRV's ARE NOT to rating, and could be dangerous. Fortunately I had a couple extras sitting around.

 

[abyss]

Also the out post on mine didn't fit the out disconnect so they sent me another post which connects to both beer and gas.

 

[Lionman]

I compared the spring to another PRV and they used the wrong spring. It's the right length, but the gauge of the wire is much heavier, which means the resistance is much greater.

This means the PRV's ARE NOT to rating, and could be dangerous. Fortunately I had a couple extras sitting around.

I think I have an old spring from when I rebuilt a used keg. Might have to scrounge it up.

 

[Reedy]

Am I missing something? $290 for a 20L keg...

New 20lt heavy stainless steel brew beverage cylinder/ keg,
http://www.gumtree.com.au/s-ad/zill...aign=socialbuttonsVIP&utm_content=app_android

Price: $290 Negotiable

 

[Grott]

Welding looks fairly ****** as well

 

[Mardoo]

And appears to be lacking posts and PRV.

 

[mtb]

Now reduced to the never-before-seen bargain rate of $245!

 

[Tony121]

I have two of those type kegs, though mine are >20 years old. Quite good but not $245 worth.

 

[Bridges]

I'm assuming this bloke is selling a kegerator... I don't get why he has written wanted on the listing. So if he is selling it it seems a good price.
https://www.gumtree.com.au/s-ad/eltham/fridges-freezers/kegerator/1158531080
Just down the road from me. Eltham Vic.

 

[Hangover68]

I'm assuming this bloke is selling a kegerator... I don't get why he has written wanted on the listing. So if he is selling it it seems a good price.
https://www.gumtree.com.au/s-ad/eltham/fridges-freezers/kegerator/1158531080
Just down the road from me. Eltham Vic.

Close to me too, very tempting.