Dual STC 1000

[j0sh2008]

Me and the old man are building 2 fermenting chambers next to each other. We want to wire 2 X STC-1000 in the same enclosure.

I was wondering if its possible to wire them in parallel ?

any ideas?

Thanks

 

[Dae Tripper]

Yes, but if you had to ask that should you be doing the wiring in the first place?

 

[klangers]

Pretty vague description mate, what exactly are you intending wiring in parallel? The input power? The relay output? Sensor? What's the aim of doing that?

 

[barls]

Me and the old man are building 2 fermenting chambers next to each other. We want to wire 2 X STC-1000 in the same enclosure.

I was wondering if its possible to wire them in parallel ?

any ideas?

Thanks

unless you know what your doing and what all the numbers your dealing with do not do this at home.
the description is way too vague.

 

[TwoCrows]

If you mean , one enclosure / control box with one 240 volt 10 amp supply powering two stc1000.

Then each stc1000 will control a fridge / fermenting chambers separately , it could be done by an electrician very easily.

If controling a fridge each fridge needs control separate to each other as temperatures will be different and compressors will require independent start and stop control.

Hope this helps, get a sparky!!!

You can also get stc1000 in 12 volt after the 240 volt supply.

 

[barls]

the problem being the current draw through the on supply lead.

 

[TwoCrows]

Yes you are correct, get a sparky.

Depends on what is being controlled within the fermentation chamber.