Brew Hardware - pumps and fittings

Aussie Home Brewer

Help Support Aussie Home Brewer:

shoobs

Well-Known Member
Joined
28/6/05
Messages
120
Reaction score
33
A bunch of assorted brew hardware.
  • 2 x Topsflo TD5 24 V pumps. These were custom built for me with a 0-5 V speed control line broken out. Note, they will not run without the 0-5 V signal supplied.
  • Power supply and speed controller PCB for the above. Not assembled or tested. Would suit someone with some electronics knowledge.
  • 3 x Beerbelly bulkheads
  • Assorted fittings, all stainless
    • 3 x 1/2" BSP female-female elbows
    • 1 x 1/2" BSP male-female elbow
    • 2 x 1/2" BSP male-male camlock
    • 1 x 1/2" BSP female-male camlock
    • 2 x 1/2" BSP male-hose tail fittings
    • 1 x 3/8" BSP male-hose tail fitting
    • 2 x 1/2" BSP male-16mm compression fitting
  • 6 x custom camlock to hose tail fittings. They fit 1/2" ID silicone hose great, without the need for cable clamps.
Honestly not sure how to best assign prices to these because they're a big old mish mash of stuff. I'd prefer to keep stuff grouped together as listed, where possible. Make me an offer.






 

shoobs

Well-Known Member
Joined
28/6/05
Messages
120
Reaction score
33
Just to post some prices that I offered Meddo:
- Pumps are $100 each, or $180 for both.
- Speed controller PCB, bunch of components and Meanwell PSU (24 V, 4.5 A) is $30 if you take both pumps.
 

Meddo

Well-Known Member
Joined
30/1/16
Messages
651
Reaction score
286
Location
Brisbane
The pumps don't quite work for my project but that's a stone cold bargain.
 

finley44

Member
Joined
8/12/14
Messages
18
Reaction score
1
Just to post some prices that I offered Meddo:
- Pumps are $100 each, or $180 for both.
- Speed controller PCB, bunch of components and Meanwell PSU (24 V, 4.5 A) is $30 if you take both pumps.

Are these parts still available
 

bill1

New Member
Joined
8/6/20
Messages
1
Reaction score
0
Location
Perth
Interested in the camlocks Shoobs (right angle female to tail and male), but are you selling them as separate lots?
 

Moog

BIAB-ER
Joined
20/11/13
Messages
123
Reaction score
27
I may be interested in one of your pumps and the control circuits to match, how much?? ( & post to south Queensland)
 

shoobs

Well-Known Member
Joined
28/6/05
Messages
120
Reaction score
33
Sorry folks, everything has sold at this point.
 

Latest posts

Top