Search results

I have been holding out on the new KK kegerator that holds 4 corny's for over a year now so have started researching alternatives. I can across this one for an ND-40 which looks the goods (but a little pricey)...

Hi all, I'm upgrading at the moment and needing to cut some holes for elements (1 1/4") and fittings (7/8") and was wondering what others are using. I'm pretty sure I used a hole saw/step bit for my BIAB setup which was a PITA to get water tight but with some messing around was OK. The...

Hi guys, If anyone has a lead on a 50L rubberised keg anywhere in Melbourne I'm all ears. Been searching the usual avenues but have had any luck. Cheers Mr W

I've been trawling the usual places for awhile now looking for snaplock adapters to finish off my 4 tap font. So I have the part that attaches to the font but need the part that attaches to the tap (I'm running perlicks in case that matters). I know that I can pick them up from CB which I will...

I've got all the bits for my travel setup but just wanted to check. It looks to me that once the reg is attached to the cylinder it can't be removed without losing whatever CO2 is left in the cylinder. Can anyone confirm this though? Cheers Mr W

Hi all, I have a brand new and unused Motion Dynamics mill motor and speed controller (see details in link to MD's website) http://www.motiondynamics.com.au/specials/...0nm-torque.html Budget constraints will see me continue to use my drill so that I can dish out some more hard earned to Nev...

Hi all, I'm looking for a compact CO2 reg (I think similar to a Harris 821) to hook up to a sodastream for taking to mates places, camping etc. I haven't had any luck with the local BOC. Is the Harris 821 the reg to go for (I'm assuming a single gauge is fine) or are there others that would...

Howdy all, No idea if Marketplace is the right spot to post but ... With a 2 year old at home my time to brew is really limited and my time to tinker setting up my grain mill is close to non existent. I've got the all clear to brew over the weekend from SWMBO but won't have time to set up the...

Howdy all, Spotted this and thought it might be of interest to someone. Apparently the entrants for the AIBA must be in 10L kegs this year. They come with either A type of D type fittings. http://www.microbrewing.com.au/index.php?o...4&Itemid=85 Cheers Mr W

Howdy all, I know there are a few who have 18 gallon kegs in their setups. Would someone be able to give me dimensions for one of these suckers (I have searched but not been able to find the details). Cheers Mr W

Hey all, I'm in the process of moving from BIAB to 3V and have settled on the Techni Ice esky for my MLT. I know a few of you guys run with these and would appreciate your comments on what size I should go for. I'll be running a keggle as my e-HLT and one of Ross's 70L pots as a BK (gas...

Anyone know where the cheapest place in Melb is for water cooler bottles? The IGA near me is selling them for $17 which is a bit steep considering I'm just going to cut the bottom off and turn it into a hopper. Also scoured the local offices and nobody seems to be throwing them out. Cheers Mr W

I think I have a problem! Walking through Woolies yesterday and noticed an 8.8L urn for $40. Need to go back without SWMBO and review the specs but would this be a good start for a herms pot? Any help appreciated as I have no idea on the ideal specs despite trawling through the loads of herms...

Hi all, I have had it confirmed by kegkits.com that their shipping rate is a flat fee of $35.75 to Australia. I'm ordering on the weekend but if anyone in Melbourne wants to join in and split the postage it'll be no worries. The bloke has been really good to deal with so far over emails so...

Hi all, I've been looking around for the best place to find some perlicks, CO2 manifold and bits and pieces. Came across kegkits.com and they seem to have a fixed shipping rate of $35.75 ( http://www.kegkits.com/Merchant2/merchant....mp;Store_Code=W ). There is other shipping costs on the...

Hi all, I bought a Lancer T-bar font last week which I'm very happy with, everything looks in good order etc. The only thing I need to sort out is running new lines. The beer lines have a plastic top moulded onto them that helps seal the whole lot together (I assume) after you slide the...

Hi all, I'm gearing up for my second brew (1st was a Dr Smurto's Golden Ale) but having no idea how to put together a recipe so I thought I'd throw it out there to see if anyone has an APA or IPA recipe they care to share. I'm BIAB'ing at the moment so if there are any out there that have a...

Hi all, I'm trying to filter my first batch using a filter the same as CB sells (would have used a sponsor but Keg King is just up the road and I'l lazy!). Running Star San through to sanitise everything and once the filter fills up I open up the valve on the out side of the filter (going to...

I'm headed up to Sydney for a conference in a couple of weeks and am trying to figure out which breweries/brewpubs I NEED to get to. I'll be locking in Murray's new place in Manly but other than that have nothing planned. I'll be staying in the CBD and will be without a car but willing to...

So I've had my first AG brew fermenting for 4 days now and the nice healthy inch or 2 krausen has now disappeared should I be doing anything or just leave it alone. The brew is a Dr Smurto Golden Ale. OG was 1.047, I haven't taken another reading yet ... was planning on waiting until I dry hop...