Wheat malt vs. Raw wheat

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Doctormcbrewdle

Well-Known Member
Joined
20/9/17
Messages
478
Reaction score
76
I've been digging around but can't seem to find much about this. What's the difference (taste, yield, ebc etc) between malted and raw, unmalted wheat malt?
 
You really should do a bit of reading up (google it), its quite a complicated question (along the lines of grandma asking how TV works)
It hasn't the available enzymes of malted wheat, these are produced during malting, the protein and glucan structures that hold the starch granules together haven't been "modified" during malting so they are much harder to get at.
To get the most out of unmalted cereal adjunct (any grain) it needs to be milled, and in many cases or if used at high levels be boiled to break out the starch granules and to make them available to the enzymes from the base malt.
You really should do a step mash, to activate Glucanase and some of the Protease to break down the B-Glucans and Protein, less important if you use Flaked or Torrefied grain.

Also, not all Wheat is created equal, with barley there are special breeds grown for malting and brewing, not the case with Wheat, the most desirable wheat for bread/pasta... is the least useful for brewing, being high in Glucans and Protein. So be careful which wheat you use, brewing quality wheat is nearly as expensive as malted wheat (doesn't make sense on one level, its down to supply and demand)

Any unmalted grain will add a slick creamy mouthfeel to the beer, it will also make the beer cloudy.
You (as above) need to do some more reading, and probably some experimenting.

Free tip - If you are milling your own grain, doing a bit of raw wheat by hand is about as good as a workout at the gym (has been known to stall many drills and to smoke a few motors.
You will also need to take a long hard look at your mill gap, best is to mill the wheat separately, several times starting at just touching the grain, then stepping down until you have a fine kibble with little flour - that will build up your chest arms and probably legs.
Mark
 
Thanks for that Mark! Lots of good info there

Would it be wise to boil AND step mash, too, or is one or the other fine?
 
When ever I make a Witbier. I use fine grain white / pale bulgur, basically its wheat that has been cracked and then gelatinised, you just throw it into your mash as any malted grain. It will give you the flavour of raw wheat but you do not need to do any extra work. Its cheap, my local Arabic shop sells its for $2.75 a kg.
 
Last edited:
Years ago ago I was really into Witbier. The recipe I came up with used 45% raw wheat (with 50% pale malted barley and 5% rolled oats). The wheat I sourced was cheap-*** red wheat from the local pet feed supplier, about a dollar a kilo.

My system produces @ 50 litres of finished beer. It's about 82% efficient, so my malt bill generally sits somewhere around the 8-9 kilo mark. Where am I going with this? A ringing endorsement for MHBs comments that milling four plus kilos of raw wheat by hand will give you the upper body strength to take on the Rock! Especially with a hand cranked, screw and plate grain style mill.

I did try boiling the wheat once (the night before brew day) but it set into a brick of unmanageable gloop overnight. Not fun. Research at the time and practical experience tells me you don't need to boil - the cell wall of the wheat becomes porous enough to admit enzymes at around 45 - 50 degrees C (from memory). I used to just do a protein rest at 47 degrees for 45 minutes. It worked fine.

I found the ratios provided above gave sufficient enzymatic horsepower to convert the starches in the unmalted grist. The OG of the beer usually landed close to what it would have if using all malt.

With a style like a Wit, the haze from the residual proteins and so on is a characteristic. They contribute to making it 'white' beer. They also help with forming the white, fluffy head. So for this style I don't use whirl floc/Irish moss - just let all that hazy, crazy wort go straight to the fermenter.

Thumbsuckers approach is one I haven't tried, but looks interesting. I must admit one of the reasons I stopped brewing this was trepidation around getting the grinder out. (I would cheat sometimes by substituting half of the raw wheat bill with malted wheat. Worked okay, but altered the beer profile a bit.)

If you are want my full recipe for Belgian Wit, let me know. It is very, very close to Hoegaarden. You will need some well oxidised hops...
 
Last edited:
Personally I would opt for "Raw Wheat" from my local, it’s the same wheat as they use for wheat malt, so it’s selected to be lower in protein and all the other things that make grain malting grade.
Yes its ridiculously expensive for an unmalted product, I suspect that’s just because there is a small demand and it’s a bit of a PITA to bother bagging short runs, so the malting house charges.
White, low protein wheat (not durum) is the best for brewing, strong wheats like durum are very high in glucans and protein which is why they make strong flour, can make for very slow lautering, very cloudy beers and lower yields.
Sure supermarket wheat will work but not as well.
Mark
 
I'm grabbing some of the above linked Duru Bulgur this afternoon for a NEIPA that I'll be brewing tomorrow
Unfortunately I wasn't prepared ahead of time to order some rolled or torrefied wheat from Brewman
I'll report back with how it goes, I've got 500g of hop hash (all random US hops) that I'll probably dump 100g or so of into the whirlpool for this brew as well
 
@MashBasher
Your experience boiling the wheat sounds a bit like mine when cloning asahi. Milled the rice and then cooked it, the thickest lump of set wallpaper paste you have ever seen had a 6 litre pot of it to incorporate into the mash. Nightmare.
 
If you are going to pre-cook your adjunct its pretty common to mix about 10% of the weight of base malt in, ie 100g/kg of adjunct.

Treat it like a mini mash but you want to mash in about 40oC for a Glucanase rest, leav for about 15 minutes, heat to a protein rest ~50oC, again rest for 15-20 minutes, heat to a boil slowly while stirring. boil for 10-15 minutes.
The enzymes will keep the porridge nice and runny.
Mash the cooked cereal in with the rest of your malt and away you go.

If you can get access to the Heineken recipe in BYO (its in their 150, 200 + mags and on the website) it covers the cereal cook pretty thoroughly.
Mark
 
Just a quick update, I should have pre-empted it but none of the Coles stores near me had the Duru Bulgur
I ended up grabbing a bag of Woolie's Macro Bulgur (which is 4 x the price of the Duru stuff)
I added 350g to my mash, so we'll see what effect it has on haze
 
Back
Top