Rehydrate yeast

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mrsupraboy

Well-Known Member
Joined
12/1/14
Messages
582
Reaction score
24
Location
sydney
Hey guys I've read up on the whole thing about rehydrating the yeast. I've got the John Palmer book in from me opened up to the yeast section. And I've been listening to Brew strong which has confused me a bit.

I've never hydrated before and I wanna start giving it ago.

My understanding is you boil a kettle. Add into a cup and add a teaspoon of sugar, let it cool down till around 40'c.

In another cup in warm boiled water add the yeast. After 15mins add both together and bobs ur uncle.

Oh yeah. And cover in cling wrap.

Is this right. How do I no its finished. And how do I oxygenate the yeast.
 
As above, different manufacturers recommend different (albeit similar) procedures. As far as I know, none of them involves the use of sugar.
 
Do not, under any circumstances, read the Re-hydrate v not thread.

Your head might explode... :)
 
How to brew instructions are old and wrong. Each manufacturer should have instructions specific to their product.
 
Ducatiboy stu said:
Do not, under any circumstances, read the Re-hydrate v not thread.

Your head might explode... :)
That's the only reason I thought I would give it ago lol so long it was lol
 
Just one cup of cooled, boiled-water, to the temperature specific for your yeast (different for ale and lager yeast) is needed.

Generally… add yeast. Let sit for 15-30mins. Stir with sanitised spoon. Let sit for 15-30mins. Swirl. Add to aerated wort. Done.
 
Watch "REHYDRATING DRIED YEAST" on YouTube
REHYDRATING DRIED YEAST:
 
Last edited by a moderator:
mrsupraboy said:
Is that right
He says to consult manufacturers instructions and then proceeds to rehydrate S04 at 105 deg F (40C)
 
mrsupraboy said:
Is that right
What yeast are you using? As mentioned several times, the manufacturer will have specific instructions on their website. That youtube clip might be right for one type of yeast but wrong for another.
 
Rough procedure is OK. Different yeast have different recommended temps for rehydration.
 
Like I said - rough procedure is ok. For specifics, refer to manufacturer's instructions.
 
I rehydrate according to whatever is on the side of the dry yeast packet I'm using.

Never had an issue, and with the notoriously slow starters like BRY97, I shorten the lag considerably. With the usually quick ones, they get done quicker (yes Notto I'm talking about you).
 
I don't think Coopers recommend hydrating their yeast, just spread the dry yeast over the top of the wort.
 
Back
Top