Perlick Tap Diagram

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

TerritoryBrew

Well-Known Member
Joined
18/1/07
Messages
214
Reaction score
15
Hi All,

I have a little bit of an issue with the Perlick Tap I bought about 3 years ago. The tap is not moving as easily as it has in the past; it is as if it is being restricted. I have taken the tap apart and re-built it, but unfortuantely I think I may have some 'O' rings in the wrong position.

Does anyone have a diagram I could use? I have contacted the place where I bought it but they do not have such a diagram. I have also searched the internet and cannot find exactly what I am looking for.

As a reference, the tap is the same as available from Ross at Craftbrewer.com here.

Cheers,

TB
 
The old tap has the assembly in this order.
1. In the top of the body place a black O ring and then a white cup washer faced up.
2. Insert handle lever through rings and into tap body.
3. Place white cup washer, faced down, and black O ring over lever.
4. Place bonnet over lever and screw down.
5. Place handle jacket(looks like a top hat) over lever and screw down.
That should be it.
 

Latest posts

Back
Top