Jeremy Bullock
Member
MyBrewbot Next Generation KickStarter campaign.
A completely redesigned circuit board, more efficient software and a new user interface enabling us to provide a future proofed fermentation control system.
The new design doubles the number of probes, fermenters and profiles, adds a pressure monitoring input for pressure fermenters and incorporates a radio transceiver for programming the controller to recognise codes from smartplug remote controls. Although the form factor is the same as the earlier models we have managed to pack the new controller with new technology and new features.
The controller has a Bluetooth module that communicates with Tilt hydrometers and can use the temperature and SG data from the Tilt to control the fermentation process.
The controller also connects to iSpindel and Plaato bubbler data sources to present them in a single interface..
Data logging is enabled for Ubidots, BrewFather and Brewer's Friend and the controller app also has data logging capability. Further data links will be established with other brewing applications as they release their APIs.
There are two temperature probe jacks allowing up to 8 temperature probes to be attached and 4 fermenters to be controlled at any one time.
The PSI jack is used to connect to a standard 5V DC Pressure Transducer Sensor which should be screwed into your spunding valve apparatus.
KickStarter
A completely redesigned circuit board, more efficient software and a new user interface enabling us to provide a future proofed fermentation control system.
The new design doubles the number of probes, fermenters and profiles, adds a pressure monitoring input for pressure fermenters and incorporates a radio transceiver for programming the controller to recognise codes from smartplug remote controls. Although the form factor is the same as the earlier models we have managed to pack the new controller with new technology and new features.
The controller has a Bluetooth module that communicates with Tilt hydrometers and can use the temperature and SG data from the Tilt to control the fermentation process.
The controller also connects to iSpindel and Plaato bubbler data sources to present them in a single interface..
Data logging is enabled for Ubidots, BrewFather and Brewer's Friend and the controller app also has data logging capability. Further data links will be established with other brewing applications as they release their APIs.
There are two temperature probe jacks allowing up to 8 temperature probes to be attached and 4 fermenters to be controlled at any one time.
The PSI jack is used to connect to a standard 5V DC Pressure Transducer Sensor which should be screwed into your spunding valve apparatus.
KickStarter
Last edited:
