Mini Keg Growler EOI

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
I believe they are, will be chatting later to confirm various points.

We're going to break it down to component pieces, some people want flasks with or without bits and pieces and tbh it's a ******* nightmare...

I'm working through issues which are many and varied
 
I'm not going forward. Thanks for organising all the same.
 
Could you categorize it into the 3 keg types, each just with caps? Then a separate list for 2-post heads. And a final list for the mini-reg. Assuming it's all interchangeable of course.
Just a thought to make it simpler for you.
Good luck w the hard work! Most appreciated [emoji106]
 
I'm working on a google docs sheet, you can all sort it out broken down as you see fit.

Default will be with tank with cap, add reg and head piece as desired.
 
Prices (as given by supplier)


"A" - 64oz (2L) mini keg with any head unit and a premium mini reg $130

"B" -1 Gal (4L) mini keg with any head unit and a premium mini reg $140

"C" - 5L with any head unit and a premium mini reg $151.50

Extra 64 oz (2L) keg $33

Extra 1gal (4L) Keg $43

Extra 5L keg $56

2lt jobbies

Fraser_John: 4, 3 without dispensing unit, 1 with dispensing unit - Shipping Geelong
Cosdog: 1 - Brisbane
Topher: 1 - Sydney
timmi9191 1 - price dependant, pick up, plus dispensing
takai: 2 - pickup, pending price
WillCowan x 2 without dispensing - Pick up - Price pending
durham70: x 2 Sydney (1 x A + 1 x extra 2l)
620rossco 1- Coffs Harbour Plus dispensing
GoodDuck x 1 - no extras (Pickup)
Brewnut x 1 no dispensing unit- Brisbane
Technobabble x1(or 2) no dispensing unit - price & rust dependent.
madpierre06 x 1 + disp. - brisbane price/issues dependent
Grainer 1 x extra

Total: 18


4lt jobbies

Yob: 1 x B + Extra
Husky: 1 - Pick Up
Cosdog: 1 - Brisbane
frag_dog: 1 - Brisbane
n87: 3 - Sydney (North Ryde)
bradsbrew: 1 - Kallangur
barls 2 - sydney one with head and reg, 1 extra
Topher 1 - Sydney. Also keen on dispening stuff price dependent.
Hophead2. : 1 Brisbane
Wolfman: 2 depends on price pick up
timmi9191 1 - price dependant, pick up
BirkdaleBob - Brisbane - 1
Masters- pick up :D -2
takai : 1 pending price, pickup\
Zwitter 1x 4L with head and reg Sydney
Grainer 1 x B + Extra
WillCowan x 1 with dispensing - Pick up - Price pending
durham70 x 1 Sydney (1 x B )
620Rossco x 1 Coffs Harbour
AJ80 x 2 + dispensing equipment - price dependent
Brewnut x 1 no dispensing unit - Brisbane
Technobabble x2 + 1 dispensing unit (v prefer ball lock, tho), price & rust dependent. (fixed your spelling for you)
Spaced x 1 - Brisbane (pending quote)
madpierre06 x 1 + disp. - Brisbane - price and other issues dependent
Bouncingcastle- 1x 4l disp., 1x2l (Melbourne) depending on price
nainsook: 1x4L

Total: 30

Reserve
Zwitter 1x 4L with head and reg Sydney


5L Jobbies
Yob: 1 x C + extra
GoodDuck: x 1 with the 2 post head and premium mini reg (Pickup)
Grainer 1 x C + extra

Added zwitter when i removed myself

Cheers
 
Someone seems to have copied an old post and i have been readded to the 2L ones. Removing myself again:

Prices (as given by supplier)


"A" - 64oz (2L) mini keg with any head unit and a premium mini reg $130

"B" -1 Gal (4L) mini keg with any head unit and a premium mini reg $140

"C" - 5L with any head unit and a premium mini reg $151.50

Extra 64 oz (2L) keg $33

Extra 1gal (4L) Keg $43

Extra 5L keg $56

2lt jobbies

Fraser_John: 4, 3 without dispensing unit, 1 with dispensing unit - Shipping Geelong
Cosdog: 1 - Brisbane
Topher: 1 - Sydney
timmi9191 1 - price dependant, pick up, plus dispensing
WillCowan x 2 without dispensing - Pick up - Price pending
durham70: x 2 Sydney (1 x A + 1 x extra 2l)
620rossco 1- Coffs Harbour Plus dispensing
GoodDuck x 1 - no extras (Pickup)
Brewnut x 1 no dispensing unit- Brisbane
Technobabble x1(or 2) no dispensing unit - price & rust dependent.
madpierre06 x 1 + disp. - brisbane price/issues dependent
Grainer 1 x extra

Total: 18


4lt jobbies

Yob: 1 x B + Extra
Husky: 1 - Pick Up
Cosdog: 1 - Brisbane
frag_dog: 1 - Brisbane
n87: 3 - Sydney (North Ryde)
bradsbrew: 1 - Kallangur
barls 2 - sydney one with head and reg, 1 extra
Topher 1 - Sydney. Also keen on dispening stuff price dependent.
Hophead2. : 1 Brisbane
Wolfman: 2 depends on price pick up
timmi9191 1 - price dependant, pick up
BirkdaleBob - Brisbane - 1
Masters- pick up :D -2
takai : 1 pending price, pickup, without reg
Zwitter 1x 4L with head and reg Sydney
Grainer 1 x B + Extra
WillCowan x 1 with dispensing - Pick up - Price pending
durham70 x 1 Sydney (1 x B )
620Rossco x 1 Coffs Harbour
AJ80 x 2 + dispensing equipment - price dependent
Brewnut x 1 no dispensing unit - Brisbane
Technobabble x2 + 1 dispensing unit (v prefer ball lock, tho), price & rust dependent. (fixed your spelling for you)
Spaced x 1 - Brisbane (pending quote)
madpierre06 x 1 + disp. - Brisbane - price and other issues dependent
Bouncingcastle- 1x 4l disp., 1x2l (Melbourne) depending on price
nainsook: 1x4L

Total: 30

Reserve
Zwitter 1x 4L with head and reg Sydney


5L Jobbies
Yob: 1 x C + extra
GoodDuck: x 1 with the 2 post head and premium mini reg (Pickup)
Grainer 1 x C + extra
 
Yep was jonnir, post 138 was last accurate.
 
All, please see link in my signature, all updates to occur in the Google docs spreadsheet, everybody should be able to access, its getting too complicated for me to edit for everyone.

So can everyone please confirm details are correct.

Prices will be adjusted when they come to light as a breakdown, it's all pretty evident in the sheet as to the direction I'm taking.

In fact can someone confirm that you can access and edit?

Cheers
 
i can access but not edit.
 
better now. i can edit
 
woot!! :beer:

Thanks mate.

Folks, as above, please make your edits to the spread sheet linked in my signature, just add what you've done in the thread here so I can ensure my offline master copy is kept up to date with changes.
 
Mine was as ordered but wasn't showing parts, fixed all good.

Awesome work Yob
 
Doh.. cant access from phone..it will have to wait!
 
Doh! I had "Ignore Signatures" in my settings. Could not work out what link you were referring to. All sorted now :)
 
GoodDuck said:
Doh! I had "Ignore Signatures" in my settings. Could not work out what link you were referring to. All sorted now :)
I was concerned that some might miss it because of that, I might send out a PM to all with the link also when I finish with the back end of the Spreadsheet.

Cheers guys
 
Yob said:
Thanks mate.

Folks, as above, please make your edits to the spread sheet linked in my signature, just add what you've done in the thread here so I can ensure my offline master copy is kept up to date with changes.
How do I opt out of the regulator?
 
I hope i've modified the spreadsheet properly.
I changed mine to:

1x 2L keg + 1x Dispensing head + 1x Mini Reg,
2x 4L keg (+ caps, i assume).

Is that right, Yob??
- i just want the 3 kegs with 1x 2-ball lock head & 1 mini reg.

Does the supplier have any SS adaptors for the mini reg?

BTW, is it silly to try to save some cash by just getting one dispensing head?
I'm hoping i can prime with dex, then 2 weeks later chill them down and pop off the cap to fit the dispensing head when i want to serve it. Is that correct, or is it optimistic??

EDIT: cheers again for organising! Stellar effort :icon_cheers:
 
Status
Not open for further replies.
Back
Top