Matho's controller

[MastersBrewery]

I thought the italian code was written for the single sided PCB which has different pin out and some other good bits added, if memory serves me SD card support?

 

[MaxN68]

The free space was really little, I see what you can do, otherwise I have to sacrifice the credits.

 

[MaxN68]

I thought the italian code was written for the single sided PCB which has different pin out and some other good bits added, if memory serves me SD card support?

ArdBir is compatible with the PCB Brauduino.
The correct pinouts are easily managed through libraries can be activated with the command # include

// SETTING PCB*****
// Select your PCB Version

// Only sperimental PCB for TESTING
//#include "Pcb_05.h"
//#include "Pcb_11s.h"
//#include "Pcb_14.h"

// Official PCB supported
//#include "Pcb_Brauduino_DanielXan.h"
#include "Pcb_Brauduino_Original.h"

Regarding the use of the SD Card I have already tried it but there is not enough space on the sketch.


However, I would like to publicly thank Matho for the excellent work done with Brauduino and without whom none of us would be here today to try to improve the way we make beer.

 

[MastersBrewery]

Cool!

 

[djar007]

Is the single sided board going to be for sale?

 

[saviothecnic]

was given all the material and information to do it for free at home
why we chose single-sided copper so easy to do at home
I can also give someone but do not know if I agree with the shipment from Italy

 

[matho]

it is great to see the brauduino has taken on a life of its own and is getting the attention I can't give it. Thankyou to all that have contributed to developing the controller further.

cheers steve

 

[lael]

it is great to see the brauduino has taken on a life of its own and is getting the attention I can't give it. Thankyou to all that have contributed to developing the controller further.

cheers steve

Steve - thanks for making it possible! It is a delight to brew with and I frequently think how blessed we are that you made the effort to rework your controller and the PCB kit etc so we could all have one. Thank you. Thank you. Thank you!

 

[MaxN68]

The Brauduino Project and ArdBir are on MAKE Magazine
http://makezine.com/2014/03/28/homebrewing-and-arduino-the-perfect-recipe/

 

[MaxN68]

We are working on the last upgrade of ardbir​​: the possibility of giving a name to the saved automation in collecting recipes.

There are considerable difficulties with the limit to 32K but trying to optimize all the firmware we are succeeding.
We still have to finish the test because of the many pieces of code revised and then proceed to make public the firmware

Stay tuned

 

[jwollmer]

Arduino troubles.
This is my first go at this but this is what I have done.
1) installed Arduino IDE
2) imported OneWire library
3) imported PIDV1 library
4) downloaded sketch from GitHub
5) Opened Sketch in Arduino IDE
6) executed Verify / Compile
At this I have received a number of errors listed below.
The only thing I haven't done was install the driver for the Uno. (I am at work and Uno is at home)
Let me know what I may have missed.

Thanks and sorry for the length of the post.
Jim


brauduino2:28: error: 'OneWire' does not name a type
brauduino2.pde: In function 'void Temperature()':
brauduino2:198: error: 'ds' was not declared in this scope
brauduino2.pde: In function 'void stage_loop(int, float, float)':
brauduino2:525: error: call of overloaded 'write(int)' is ambiguous
C:\Program Files (x86)\Arduino\libraries\LiquidCrystal/LiquidCrystal.h:82: note: candidates are: virtual size_t LiquidCrystal::write(uint8_t)
C:\Program Files (x86)\Arduino\hardware\arduino\cores\arduino/Print.h:49: note: size_t Print::write(const char*)
brauduino2.pde: In function 'void manual_mode()':
brauduino2:655: error: call of overloaded 'write(int)' is ambiguous
C:\Program Files (x86)\Arduino\libraries\LiquidCrystal/LiquidCrystal.h:82: note: candidates are: virtual size_t LiquidCrystal::write(uint8_t)
C:\Program Files (x86)\Arduino\hardware\arduino\cores\arduino/Print.h:49: note: size_t Print::write(const char*)
brauduino2.pde: In function 'void loop()':
brauduino2:1049: error: call of overloaded 'write(int)' is ambiguous
C:\Program Files (x86)\Arduino\libraries\LiquidCrystal/LiquidCrystal.h:82: note: candidates are: virtual size_t LiquidCrystal::write(uint8_t)
C:\Program Files (x86)\Arduino\hardware\arduino\cores\arduino/Print.h:49: note: size_t Print::write(const char*)
brauduino2.ino: At global scope:
brauduino2:28: error: 'OneWire' does not name a type
brauduino2:29: error: redefinition of 'LiquidCrystal lcd'
brauduino2:29: error: 'LiquidCrystal lcd' previously declared here
brauduino2:33: error: redefinition of 'const char Button_up'
brauduino2:33: error: 'const char Button_up' previously defined here
brauduino2:34: error: redefinition of 'const char Button_dn'
brauduino2:34: error: 'const char Button_dn' previously defined here
brauduino2:35: error: redefinition of 'const char Button_prev'
brauduino2:35: error: 'const char Button_prev' previously defined here
brauduino2:36: error: redefinition of 'const char Button_nxt'
brauduino2:36: error: 'const char Button_nxt' previously defined here
brauduino2:40: error: redefinition of 'const int Heat'
brauduino2:40: error: 'const int Heat' previously defined here
brauduino2:41: error: redefinition of 'const int Pump'
brauduino2:41: error: 'const int Pump' previously defined here
brauduino2:42: error: redefinition of 'const int Buzz'
brauduino2:42: error: 'const int Buzz' previously defined here
brauduino2:46: error: redefinition of 'unsigned int WindowSize'
brauduino2:46: error: 'unsigned int WindowSize' previously declared here
brauduino2:48: error: redefinition of 'long unsigned int windowStartTime'
brauduino2:48: error: 'long unsigned int windowStartTime' previously declared here
brauduino2:49: error: redefinition of 'long unsigned int start'
brauduino2:49: error: 'long unsigned int start' previously declared here
brauduino2:51: error: redefinition of 'double Setpoint'
brauduino2:51: error: 'double Setpoint' previously declared here
brauduino2:51: error: redefinition of 'double Input'
brauduino2:51: error: 'double Input' previously declared here
brauduino2:51: error: redefinition of 'double Output'
brauduino2:51: error: 'double Output' previously declared here
brauduino2:51: error: redefinition of 'double eepromKp'
brauduino2:51: error: 'double eepromKp' previously declared here
brauduino2:51: error: redefinition of 'double eepromKi'
brauduino2:51: error: 'double eepromKi' previously declared here
brauduino2:51: error: redefinition of 'double eepromKd'
brauduino2:51: error: 'double eepromKd' previously declared here
brauduino2:53: error: redefinition of 'boolean manualLoop'
brauduino2:53: error: 'boolean manualLoop' previously defined here
brauduino2:54: error: redefinition of 'boolean waterAdd'
brauduino2:54: error: 'boolean waterAdd' previously defined here
brauduino2:55: error: redefinition of 'boolean Conv_start'
brauduino2:55: error: 'boolean Conv_start' previously defined here
brauduino2:56: error: redefinition of 'boolean mpump'
brauduino2:56: error: 'boolean mpump' previously defined here
brauduino2:57: error: redefinition of 'boolean mheat'
brauduino2:57: error: 'boolean mheat' previously defined here
brauduino2:58: error: redefinition of 'boolean wtBtn'
brauduino2:58: error: 'boolean wtBtn' previously defined here
brauduino2:59: error: redefinition of 'boolean autoEnter'
brauduino2:59: error: 'boolean autoEnter' previously defined here
brauduino2:60: error: redefinition of 'boolean tempReached'
brauduino2:60: error: 'boolean tempReached' previously defined here
brauduino2:61: error: redefinition of 'boolean pumpRest'
brauduino2:61: error: 'boolean pumpRest' previously defined here
brauduino2:63: error: redefinition of 'boolean resume'
brauduino2:63: error: 'boolean resume' previously defined here
brauduino2:64: error: redefinition of 'float mset_temp'
brauduino2:64: error: 'float mset_temp' previously defined here
brauduino2:65: error: redefinition of 'float Temp_c'
brauduino2:65: error: 'float Temp_c' previously declared here
brauduino2:65: error: redefinition of 'float stageTemp'
brauduino2:65: error: 'float stageTemp' previously declared here
brauduino2:65: error: redefinition of 'float pumptempError'
brauduino2:65: error: 'float pumptempError' previously declared here
brauduino2:67: error: redefinition of 'int temp'
brauduino2:67: error: 'int temp' previously declared here
brauduino2:68: error: redefinition of 'int x'
brauduino2:68: error: 'int x' previously declared here
brauduino2:69: error: redefinition of 'int stageTime'
brauduino2:69: error: 'int stageTime' previously declared here
brauduino2:69: error: redefinition of 'int hopTime'
brauduino2:69: error: 'int hopTime' previously declared here
brauduino2:71: error: redefinition of 'byte mainMenu'
brauduino2:71: error: 'byte mainMenu' previously defined here
brauduino2:72: error: redefinition of 'byte pumpTime'
brauduino2:72: error: 'byte pumpTime' previously declared here
brauduino2:73: error: redefinition of 'byte data [2]'
brauduino2:73: error: 'byte data [2]' previously declared here
brauduino2:74: error: redefinition of 'byte second'
brauduino2:74: error: 'byte second' previously declared here
brauduino2:77: error: redefinition of 'byte Busy'
brauduino2:77: error: 'byte Busy' previously defined here
brauduino2:78: error: redefinition of 'byte nmbrStgs'
brauduino2:78: error: 'byte nmbrStgs' previously declared here
brauduino2:79: error: redefinition of 'byte nmbrHops'
brauduino2:79: error: 'byte nmbrHops' previously declared here
brauduino2:80: error: redefinition of 'byte tempHAddr'
brauduino2:80: error: 'byte tempHAddr' previously declared here
brauduino2:81: error: redefinition of 'byte tempLAddr'
brauduino2:81: error: 'byte tempLAddr' previously declared here
brauduino2:82: error: redefinition of 'byte timeAddr'
brauduino2:82: error: 'byte timeAddr' previously declared here
brauduino2:83: error: redefinition of 'byte blhpAddr'
brauduino2:83: error: 'byte blhpAddr' previously declared here
brauduino2:84: error: redefinition of 'byte hopAdd'
brauduino2:84: error: 'byte hopAdd' previously declared here
brauduino2:86: error: redefinition of 'char* stgName []'
brauduino2:86: error: 'char* stgName [10]' previously defined here
brauduino2:90: error: redefinition of 'byte degc [8]'
brauduino2:90: error: 'byte degc [8]' previously defined here
brauduino2:104: error: redefinition of 'PID myPID'
brauduino2:104: error: 'PID myPID' previously declared here
brauduino2.ino: In function 'void Buzzer(int)':
brauduino2:110: error: redefinition of 'void Buzzer(int)'
brauduino2:110: error: 'void Buzzer(int)' previously defined here
brauduino2.ino: In function 'void pause_stage()':
brauduino2:123: error: redefinition of 'void pause_stage()'
brauduino2:123: error: 'void pause_stage()' previously defined here
brauduino2.ino: In function 'void display_lcd(int, int, const char*)':
brauduino2:140: error: redefinition of 'void display_lcd(int, int, const char*)'
brauduino2:140: error: 'void display_lcd(int, int, const char*)' previously defined here
brauduino2.ino: In function 'int Button_1sec_press(int)':
brauduino2:152: error: redefinition of 'int Button_1sec_press(int)'
brauduino2:152: error: 'int Button_1sec_press(int)' previously defined here
brauduino2.ino: In function 'int Button_repeat(int)':
brauduino2:171: error: redefinition of 'int Button_repeat(int)'
brauduino2:171: error: 'int Button_repeat(int)' previously defined here
brauduino2.ino: In function 'int Button_hold_press(int)':
brauduino2:183: error: redefinition of 'int Button_hold_press(int)'
brauduino2:183: error: 'int Button_hold_press(int)' previously defined here
brauduino2.ino: In function 'void Temperature()':
brauduino2:197: error: redefinition of 'void Temperature()'
brauduino2:197: error: 'void Temperature()' previously defined here
brauduino2:198: error: 'ds' was not declared in this scope
brauduino2.ino: In function 'void PID_HEAT()':
brauduino2:229: error: redefinition of 'void PID_HEAT()'
brauduino2:229: error: 'void PID_HEAT()' previously defined here
brauduino2.ino: In function 'void load_pid_settings()':
brauduino2:246: error: redefinition of 'void load_pid_settings()'
brauduino2:246: error: 'void load_pid_settings()' previously defined here
brauduino2.ino: In function 'boolean wait_for_confirm(boolean&)':
brauduino2:262: error: redefinition of 'boolean wait_for_confirm(boolean&)'
brauduino2:262: error: 'boolean wait_for_confirm(boolean&)' previously defined here
brauduino2.ino: In function 'float change_temp(float&, int, int)':
brauduino2:284: error: redefinition of 'float change_temp(float&, int, int)'
brauduino2:284: error: 'float change_temp(float&, int, int)' previously defined here
brauduino2.ino: In function 'void quit_mode(boolean&)':
brauduino2:313: error: redefinition of 'void quit_mode(boolean&)'
brauduino2:313: error: 'void quit_mode(boolean&)' previously defined here
brauduino2.ino: In function 'void heat_control()':
brauduino2:328: error: redefinition of 'void heat_control()'
brauduino2:328: error: 'void heat_control()' previously defined here
brauduino2.ino: In function 'void pump_control()':
brauduino2:348: error: redefinition of 'void pump_control()'
brauduino2:348: error: 'void pump_control()' previously defined here
brauduino2.ino: In function 'void prompt_for_water()':
brauduino2:367: error: redefinition of 'void prompt_for_water()'
brauduino2:367: error: 'void prompt_for_water()' previously defined here
brauduino2.ino: In function 'void pump_prime()':
brauduino2:376: error: redefinition of 'void pump_prime()'
brauduino2:376: error: 'void pump_prime()' previously defined here
brauduino2.ino: In function 'void pump_rest(int)':
brauduino2:396: error: redefinition of 'void pump_rest(int)'
brauduino2:396: error: 'void pump_rest(int)' previously defined here
brauduino2.ino: In function 'void check_for_resume()':
brauduino2:419: error: redefinition of 'void check_for_resume()'
brauduino2:419: error: 'void check_for_resume()' previously defined here
brauduino2.ino: In function 'void load_stage_settings()':
brauduino2:439: error: redefinition of 'void load_stage_settings()'
brauduino2:439: error: 'void load_stage_settings()' previously defined here
brauduino2.ino: In function 'void start_time()':
brauduino2:450: error: redefinition of 'void start_time()'
brauduino2:450: error: 'void start_time()' previously defined here
brauduino2.ino: In function 'void stage_timing(int)':
brauduino2:462: error: redefinition of 'void stage_timing(int)'
brauduino2:462: error: 'void stage_timing(int)' previously defined here
brauduino2.ino: In function 'void hop_add()':
brauduino2:483: error: redefinition of 'void hop_add()'
brauduino2:483: error: 'void hop_add()' previously defined here
brauduino2.ino: In function 'void stage_loop(int, float, float)':
brauduino2:503: error: redefinition of 'void stage_loop(int, float, float)'
brauduino2:503: error: 'void stage_loop(int, float, float)' previously defined here
brauduino2.ino: In function 'void get_stage_settings()':
brauduino2:549: error: redefinition of 'void get_stage_settings()'
brauduino2:549: error: 'void get_stage_settings()' previously defined here
brauduino2.ino: In function 'void add_malt()':
brauduino2:567: error: redefinition of 'void add_malt()'
brauduino2:567: error: 'void add_malt()' previously defined here
brauduino2.ino: In function 'void remove_malt()':
brauduino2:588: error: redefinition of 'void remove_malt()'
brauduino2:588: error: 'void remove_malt()' previously defined here
brauduino2.ino: In function 'void get_boil_settings()':
brauduino2:617: error: redefinition of 'void get_boil_settings()'
brauduino2:617: error: 'void get_boil_settings()' previously defined here
brauduino2.ino: In function 'void manual_mode()':
brauduino2:641: error: redefinition of 'void manual_mode()'
brauduino2:636: error: 'void manual_mode()' previously defined here
brauduino2.ino: In function 'void auto_mode()':
brauduino2:673: error: redefinition of 'void auto_mode()'
brauduino2:668: error: 'void auto_mode()' previously defined here
brauduino2.ino: In function 'void save_settings(int, int)':
brauduino2:736: error: redefinition of 'void save_settings(int, int)'
brauduino2:731: error: 'void save_settings(int, int)' previously defined here
brauduino2.ino: In function 'void save_settings(int, byte)':
brauduino2:745: error: redefinition of 'void save_settings(int, byte)'
brauduino2:740: error: 'void save_settings(int, byte)' previously defined here
brauduino2.ino: In function 'int change_set(int&, int, int, int)':
brauduino2:754: error: redefinition of 'int change_set(int&, int, int, int)'
brauduino2:749: error: 'int change_set(int&, int, int, int)' previously defined here
brauduino2.ino: In function 'int change_set(byte&, int, int, int)':
brauduino2:773: error: redefinition of 'int change_set(byte&, int, int, int)'
brauduino2:768: error: 'int change_set(byte&, int, int, int)' previously defined here
brauduino2.ino: In function 'void unit_set()':
brauduino2:794: error: redefinition of 'void unit_set()'
brauduino2:789: error: 'void unit_set()' previously defined here
brauduino2.ino: In function 'void set_stages()':
brauduino2:847: error: redefinition of 'void set_stages()'
brauduino2:842: error: 'void set_stages()' previously defined here
brauduino2.ino: In function 'void set_hops()':
brauduino2:905: error: redefinition of 'void set_hops()'
brauduino2:900: error: 'void set_hops()' previously defined here
brauduino2.ino: In function 'void auto_set()':
brauduino2:948: error: redefinition of 'void auto_set()'
brauduino2:943: error: 'void auto_set()' previously defined here
brauduino2.ino: In function 'void setup_mode()':
brauduino2:957: error: redefinition of 'void setup_mode()'
brauduino2:952: error: 'void setup_mode()' previously defined here
brauduino2.ino: In function 'void setup()':
brauduino2:988: error: redefinition of 'void setup()'
brauduino2:983: error: 'void setup()' previously defined here
brauduino2.ino: In function 'void loop()':
brauduino2:1011: error: redefinition of 'void loop()'
brauduino2:1006: error: 'void loop()' previously defined here

 

[bonj]

Arduino troubles.

<snip>

brauduino2:28: error: 'OneWire' does not name a type
brauduino2.pde: In function 'void Temperature()':
brauduino2:198: error: 'ds' was not declared in this scope

The first error indicates that the OneWire library hasn't imported properly. Give it another try and see what happens. You may find that once that is fixed, most or all of the other errors will go away.

 

[MaxN68]

I just finished writing the code for what will be the last change of ArdBir: the possibility of giving a name (maximum 10 characters) to save the settings of the automation.

The space is pretty much everything, including with regard to the RAM.
For any change to be made is docrà migrate to the upper platform: Arduino Mega.

I also wrote the English translation for all the changes made.

Currently the firmware is to be considered in Beta version, for problems related to the health of my loved ones do not have too much time to make all the necessary checks.
In peossimi days I'll put the link where to find this version.
I hope you can help me to fix errors related to incorrect display on the display of the various written.

 

[MastersBrewery]

Thanks for the Great work max and I'm all of us here wish a speed recovery for your loved ones.

MB

 

[changchuyo]

Hi everyone. I succesfully changed the buzzer sound, now it sounds louder. I don't know if this right way to do it but it works. Here is the code I modified:


//****** start of the functions**************

void Buzzer(int number)
{
for (int i=0; i < number; i++)
{
analogWrite(Buzz,20);
delay (500);
analogWrite(Buzz,0);
delay(100);
}

}

 

[real_beer]

https://github.com/MaxN68it/Open-ArdBir

Has anyone compiled and got the latest version running using Pcb_Brauduinriginal.h and LCD16x2_ENG.h
I've been stuffing around with it for the last day & a half & just wondered if anyone is using it successfully Australia. I don't want to post pages of code listings......... yet at least, just curious.
All the libaries have loaded okay.

These are the errors I get at the moment, no doubt they'll change to others when these go away:
-------------------------------------------
In file included from ArdBir.ino:108:0:
Recipe.h: In function ‘void RecipeMenu()’:
Recipe.h:201:20: error: too few arguments to function ‘void Menu_3_4_2(byte)’
Menu_3_4_2();
^
In file included from ArdBir.ino:99:0:
LCD16x2_ITA.h:349:6: note: declared here
void Menu_3_4_2(byte Riga){
^
---------------------------------------------------

 

[djar007]

Does Mathos original code compile for you.

 

[real_beer]

Does Mathos original code compile for you.

Hi 007

Yeah it works great, & I've got it loaded on two controllers already. I was interested about updating them and seeing what the extra features are like but don't really have a problem it I can't

 

[MaxN68]

I tried to compile version 2.6.54 and I have not encountered any errors.
If you want you can try the latest version.
This is a beta version (not fully tested), but it is seen that the final structure of the occupied space does not permit further changes.

Open ArdBir 2.6.61j (Beta)

 

[real_beer]

I tried to compile version 2.6.54 and I have not encountered any errors.
If you want you can try the latest version.
This is a beta version (not fully tested), but it is seen that the final structure of the occupied space does not permit further changes.

Open ArdBir 2.6.61j (Beta)

Thanks MaxN68, It compiled and uploaded perfectly. Big Sloppy xoxoxoxo

Cheers