March Pump Bulk Buy

[homebrewworld.com]

C'mon go 25 boys.
If i could justify another, i would buy two more ?"*?
:huh:

 

[Doc]

i wonder if we get an extra discount if we get 25....

This is pretty good....will be spending over 5000.00

[post="72640"][/post]​

Johnno has asked, but the answer was we would have to buy a hundred or more to get a further discount.

Beers,
Doc

 

[johnno]

i wonder if we get an extra discount if we get 25....

This is pretty good....will be spending over 5000.00

[post="72640"][/post]​

GMK,
Beleive me I have tried.


John

Many thanks for the update, the price of $181.00 plus GST is as low as we can get on these units unless we start talking hundreds and the factory may give us a special price.


Kind and best regards
Process Pumps (Aust) Pty Ltd
Greg Moorhouse

www.processpumps.com.au
Authorised Australian Distributors for:
LUTZ Drum and container pumps, MICROPUMP magnetic drive gear pumps, NIKKISO magnetic drive, TEXEL magnetic drive, MARCH magnetic drive, LIQUIFLO gear pumps, ROTAN internal gear pumps, CRANE DEMING centrifugals, ACPL vertical column pumps, MTH turbine pumps, ENDURA ANSI magnetic drive, BORGER rotary lobe, AMAZON bag filters, VALAM diaphragm valves


-----Original Message-----
From: Me
Sent: Thursday, August 18, 2005 8:35 AM
To: [email protected]
Subject: RE: March Pump bulk buy

Hi Greg
An update for you on the order.
At the moment it looks like we are up to 21 pumps and about half that many brackets. There may be a few more by the time I confirm the final order tomorrow morning.
Is that the absolute best price you can do for us for the order?
Can you do any better?
I will mail you tomorrow morning around this time with the final numbers.
Many thanks.
John



Personally I'm pretty happy with the price.

johnno

 

[Batz]

25 new real brewers !

 

[GMK]

Johnno

No worries - now e-mail him with the stuff i put in the PM to you....

Go you GOOD THING...

PS - dont tell Batz that i modified his Slogan - he will get upset...AGAIN.

 

[Darren]

Personally I'm pretty happy with the price.

johnno

[post="72646"][/post]​

Probably not the best way to get further discounts. Please excuse my Scottish heritage

 

[GMK]

Personally I'm pretty happy with the price.

johnno

[post="72646"][/post]​

Probably not the best way to get further discounts. Please excuse my Scottish heritage

[post="72661"][/post]​

OK - I PMed Johnno - and mentioned taht he should ask if they want to Advertise with AHB and contact Dane if they did - they could use a Batz/Gmk Slogan...

"Your not a REAL Brewer until u use a MARCH Pump from Process Pumps!"

Also, mentioned taht he hit them up for some freebies/merchandising ie polo shirt, hat etc and that he makes sure taht he keeps a good few for doing th eleg work and hand a couple others out.

After All - u cant get what u dont ask for - and it is all in the marketing...ASKING!

That was all - hope i have not over stepped the mark/on anyone's toes.

 

[Giles Matthews]

Hi all,

Was wondering how to get involved in your plan to bulk buy March pumps, what is required from me?

I require two.

Regards,

Giles Matthews

 

[ntboozer]

As a new member to this site (and a keen future AG'er) I'd also like to say a big cheers :beerbang: :beer: :super: to all involved with this bulk buy.
If ever in the sunny NT there will always be a cold beer on tap at my place (hopefully an AG).
NTBoozer

 

[Doc]

That is it Giles, you've just committed yourself to two pumps.
Welcome aboard. What a first post eh :lol:
Do you want brackets with them ?

Doc

 

[Giles Matthews]

Doc,

Certainly! 2 pumps, 2 brackets.

regards

Giles Matthews

 

[Doc]

This is it. We are down to the wire.

We have 25.

This is where we are at.
Final cutoff 7am Friday morning.

If you want a bracket and (bracket) isn't next to your name then please let us know, otherwise you'll be dissappointed when you don't get the bracket.

March Pump Confirmed - 25
Doc (bracket)
Peter Shane (bracket)
Redbeard (bracket)
Trev
Tim (bracket)
Johnno
Hopsta (bracket)
AndrewQLD (bracket)
Bagnol
Murray
BrianK (bracket)
hakko (bracket)
shinerj (bracket)
daveisbludging (bracket)
Wally (bracket)
ntboozer (bracket)
GMK (brackets) x 2
Kook (bracket)
Green Iguana (bracket)
Hopeye (bracket)
Lukes (bracket)
visbrobrewing
GilesMatthews (brackets) x2

Pump - On hold/waiting confirmation - 1
Hoops brewclub mate

Bracket Only - 2
GulfBrewery
Linz

Beers,
Doc

 

[Hoops]

Well I've called me mate but no reply so I left a message.
If he hasn't called me by tomorrow morning or posted here then I'll assume he's not in on the order.

Hoops

Edit: anyone have a photo of the bracket?

 

[Doc]

Orders Closed
Order Summary
Total # March pumps 25
Total # March pump brackets 22

As detailed previously, Johnno will submit the order this morning.
He will get a definite price on the brackets (we already have a definite price on the pump and postage).
You will be contacted over the next few days with Bank A/C details to transfer the cash, and you will need to provide your address you want the pump posted to.

Thanks brewers,
Doc & Johnno

 

[Murray]

Great work, Johnno and Doc.

 

[johnno]

Just got final confirmation from Process Pumps for 25 pumps and 23 brackets.

Final price is
Pump $181 + GST = $199.10
Bracket $18 + GST = $19.80
Postage $15 + GST = $16.50

For Linz and Gulf Brewery who have ordered a bracket only, the cost of postage is still the same. If someone near you is getting the pump it may be a good idea to let me know and get one delivery to split postage costs. I will still need to confirm with them.
I have sent out PM's top all involved.

Oops. Forgot to add that the order is being sent today and while Greg has assured me he will try and do everything he can to get it here as soon as possible, it may still be 3 or 4 weeks.
johnno

 

[Darren]

you guys should consider getting some good quality high temp hoses.
That stuff is damn expensive in short lengths but quite cheap by the roll

 

[PeterS]

you guys should consider getting some good quality high temp hoses.
That stuff is damn expensive in short lengths but quite cheap by the roll

[post="72792"][/post]​

Darren. tell me more about these hoses. I know we had a tread on this before, but since you mentioned it, could you elaborate please, like what is the brand name, or material, where to get it and how much does it cost.?

Thanks in anticipation.

:beer:
PeterS....

 

[Darren]

you guys should consider getting some good quality high temp hoses.
That stuff is damn expensive in short lengths but quite cheap by the roll

[post="72792"][/post]​

Darren. tell me more about these hoses. I know we had a tread on this before, but since you mentioned it, could you elaborate please, like what is the brand name, or material, where to get it and how much does it cost.?

Thanks in anticipation.

:beer:
PeterS....

[post="72799"][/post]​

I am unsure of the brand/name. It is quite difficult to get food grade hose rated for boiling temps.
I bought mine from MOving Brews a few years ago. I have tried to replace them but can only find hose rated to 60/80 degree C. unless I buy a whole roll (from memory it was $800 for 30 metres). I recall it was actually called
beer hose. I would be suprised if the guys selling the pumps can't get it seeing how the pumps are rated at boiling.
cheers
Darren

 

[Doc]

I'm sorted.
I stocked up on Silicon Tubing from MoreBeer last month.
I also got the half inch barb for the in side of the pump. For the out side of the pump I'll screw directly on my 1/2"inch valve to control the flowrate.

Beers,
Doc