Nevalicious
Hardcore Cuber...
- Joined
- 1/9/09
- Messages
- 501
- Reaction score
- 0
Hey all. Have yet to setup any kegging equipment but am starting to get all of the bits together. Picked up my micromatic reg today, 9 odd meters of line, clamps etc etc. I am about to order some perlicks and disconnects from the US from eBay seller Brauman59. Have been in contact with him and got quotes. I figure I may as well fill the postal boxes, so looked around on his site for other gear I will need to complete the keg fridge.
I need to split the gas line up into 4 outlets. I have a question though...
If I use basic barbed line splitters as opposed to some sort of manifold, say I have one beer that I brewed and fermented the week before, has now been carbing the slow (read: non "Ross" method) way and is now drinkable and up to pressure, if, using the line splitters, I go and connect an uncarbonated keg to the system, will the beer from the carbonated keg go up the gas line to the uncarbonated keg due to the pressure differential...?
This may sound somewhat confusing, as I sometimes, well most of the time cannot put my thoughts down in text, but I cannot find any information out there that will confirm or deny what I am saying... I want to know whether there is any gain for me ordering the expandable manifold setup or just using line splitters. I will of course be using a Non Return Valve to prevent beer ruining my reg...
Is this a justified question or am I barking up the wrong tree??
Cheers
Tyler
I need to split the gas line up into 4 outlets. I have a question though...
If I use basic barbed line splitters as opposed to some sort of manifold, say I have one beer that I brewed and fermented the week before, has now been carbing the slow (read: non "Ross" method) way and is now drinkable and up to pressure, if, using the line splitters, I go and connect an uncarbonated keg to the system, will the beer from the carbonated keg go up the gas line to the uncarbonated keg due to the pressure differential...?
This may sound somewhat confusing, as I sometimes, well most of the time cannot put my thoughts down in text, but I cannot find any information out there that will confirm or deny what I am saying... I want to know whether there is any gain for me ordering the expandable manifold setup or just using line splitters. I will of course be using a Non Return Valve to prevent beer ruining my reg...
Is this a justified question or am I barking up the wrong tree??
Cheers
Tyler