Keg King MKII temp controller issues

[Beerdave]

Hi. Recently purchased a keg King MKII temp controller. On heating function (I'm using a rims system), the temp is dropping below set points before the heating relay kicks in. E.g. At set point of 65 degrees (hysteresis configured to 0.1 degree), temp can drop to 62 degrees. Wondering if others have experienced similar issues? Appreciate any help. Cheers, Dave.

 

[user 36151]

Check there is no delay/anti cycle timers set, not familiar with this controller but others have default 3 min delays. Indicator symbol may flash when its timing out.

 

[mattyh77]

I don't have my manual handy, but there is definitely a delay setting you need to adjust. I have my cold setting set to 4 min so compressor wont burn out.

 

[Beerdave]

Check there is no delay/anti cycle timers set, not familiar with this controller but others have default 3 min delays. Indicator symbol may flash when its timing out.

thanks. There's no delay set but thanks for suggesting

 

[Beerdave]

I don't have my manual handy, but there is definitely a delay setting you need to adjust. I have my cold setting set to 4 min so compressor wont burn out.

thanks. Confirmed delays not thy the problem but thanks for the suggestion.