JG 4 way manifold

[capsicum]

Hi all,

Anyone know where I can get a four-way CO2 manifold with proper John Guest fittings?

I'm doing a whole new keg system and want to do it right this time, too many skinned knuckles and leaks with the barbs last time!

Sorry - I know this has been posted before but can't find any recent info, and can only find barbed manifolds through the sponsors.

Cheers.

 

[woodwormm]

there's this style of thing
http://www.ebay.com.au/itm/8mm-5-Way-Splitter-Push-in-Connector-Pneumatic-Fittings-Black-/400676571608?pt=AU_Business_Industrial_Industrial_Supply_MRO&hash=item5d4a2f49d8&_uhb=1

or a manifold like this
http://www.ebay.com.au/itm/3-WAY-CO2-CARBON-DIOXCIDE-GAS-MANIFOLD-KEG-KEGGING-BEER-GAS-BOTTLE-BEER-TAP-/261449186605?pt=AU_Barware&hash=item3cdf95fd2d&_uhb=1

you should b able to replace the barbs with
http://www.ebay.com.au/itm/10-x-Pneumatic-One-Touch-Push-In-Quick-Coupling-1-4-PT-Thread-for-8mm-Air-Tube-/301154106950?pt=AU_Business_Industrial_Industrial_Supply_MRO&hash=item461e2efe46&_uhb=1

 

[Crusty]

Hi all,

Anyone know where I can get a four-way CO2 manifold with proper John Guest fittings?

I'm doing a whole new keg system and want to do it right this time, too many skinned knuckles and leaks with the barbs last time!

Sorry - I know this has been posted before but can't find any recent info, and can only find barbed manifolds through the sponsors.

Cheers.

Give CraftBrewer a call.
I got both mine from there. They put a gas in JG fitting on the manifold as well so JG fittings all round.

 

[mattfos01]

Is the JG fitting on the barb? Can't figure how they have worked it with the tap fitting on there..

 

[Crusty]

Is the JG fitting on the barb? Can't figure how they have worked it with the tap fitting on there..

Taking a closer look at mine, it looks like the barbed bit screws out from the tap & a threaded MFL fitting screwed in. The JG fitting then simply screws on.
Do you already have one & want to convert it? If not, give CraftBrewer a call & Ross or Anthony will sort you out. Make sure you mention the gas in port as normally they leave that as is, ie: barb.

 

[NewtownClown]

there's this style of thing
http://www.ebay.com.au/itm/8mm-5-Way-Splitter-Push-in-Connector-Pneumatic-Fittings-Black-/400676571608?pt=AU_Business_Industrial_Industrial_Supply_MRO&hash=item5d4a2f49d8&_uhb=1

These are crappy and leak. I have a three way that was never used due to leaking

or a manifold like this
http://www.ebay.com.au/itm/3-WAY-CO2-CARBON-DIOXCIDE-GAS-MANIFOLD-KEG-KEGGING-BEER-GAS-BOTTLE-BEER-TAP-/261449186605?pt=AU_Barware&hash=item3cdf95fd2d&_uhb=1

I emailed them recently, they said they don't have in built check valves

you should b able to replace the barbs with
http://www.ebay.com.au/itm/10-x-Pneumatic-One-Touch-Push-In-Quick-Coupling-1-4-PT-Thread-for-8mm-Air-Tube-/301154106950?pt=AU_Business_Industrial_Industrial_Supply_MRO&hash=item461e2efe46&_uhb=1

Anyone enlighten me as to what is a "PT" thread?

I purchased this one
http://www.ebay.com.au/itm/281290348395?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

 

[capsicum]

Give CraftBrewer a call.
I got both mine from there. They put a gas in JG fitting on the manifold as well so JG fittings all round.

Cheers

That looks like exactly what I'm after. On their website they only have barbed ones but I'll get in touch and see if they can change them over.

Any trouble with it so far?