kelbygreen
Crazy Clown
- Joined
- 28/11/09
- Messages
- 2,850
- Reaction score
- 21
I am selling my keg setup. I want $550 for it and you will get these.
*Westinghouse chest freezer bought in April 2012, Its near new I stopped brewing for 2 years and used it on and off then. There is scratches ontop of the lid where I must of worked on something I cant remember how they got there lol. Also a bit of paint bubbled off the inside for some reason
*2 x 19lt corny kegs, I Brewed a little at the end of last year and all the seals are good and both still had pressure after sitting a month or more tonight when I cleaned them.
*1 x 23lt (I think) firestone keg. This keg is missing a diptube (air tubes there) and missing the posts also I was going to repair it never got around to it.
*Air lines for 2 kegs and a non return valve, these also did not leak after turning gas off I checked a week later and still had pressure.
*2 x perlick taps 525SS
*Tesuco dual dial regulator. (gas cylinder in picture is not included BOC own that)
*stc1000 temp control, This is in working order but I had it in a ice cream box and it broke so you will have to buy a box and wire it to that. I have leads and all just need a box to mount it.
*Spare O rings, blow off valve, handles (these need a good clean or something), 4 spare Gas D/C (6 in total), 2 spare beer D/C (4 in total) and also will give you the spanner thingo I found that fits the posts so you can undo them.
* A bottle carbonation cap so you can carb up PET bottles
So all you need to do is rewire the stc1000 and buy/hire a c02 cylinder and your good to go.
*Westinghouse chest freezer bought in April 2012, Its near new I stopped brewing for 2 years and used it on and off then. There is scratches ontop of the lid where I must of worked on something I cant remember how they got there lol. Also a bit of paint bubbled off the inside for some reason
*2 x 19lt corny kegs, I Brewed a little at the end of last year and all the seals are good and both still had pressure after sitting a month or more tonight when I cleaned them.
*1 x 23lt (I think) firestone keg. This keg is missing a diptube (air tubes there) and missing the posts also I was going to repair it never got around to it.
*Air lines for 2 kegs and a non return valve, these also did not leak after turning gas off I checked a week later and still had pressure.
*2 x perlick taps 525SS
*Tesuco dual dial regulator. (gas cylinder in picture is not included BOC own that)
*stc1000 temp control, This is in working order but I had it in a ice cream box and it broke so you will have to buy a box and wire it to that. I have leads and all just need a box to mount it.
*Spare O rings, blow off valve, handles (these need a good clean or something), 4 spare Gas D/C (6 in total), 2 spare beer D/C (4 in total) and also will give you the spanner thingo I found that fits the posts so you can undo them.
* A bottle carbonation cap so you can carb up PET bottles
So all you need to do is rewire the stc1000 and buy/hire a c02 cylinder and your good to go.