EOI PRESSURE RELIEF VALVE.

[Mr_Brewer]

interested for 2 but depending on price

 

[mtb]

Keen on 2 - 6, price dependant

 

[Maheel]

yahhh interested in a couple when you know the price

 

[wide eyed and legless]

The price I know, its the delivery, and hopefully maybe negotiate down from the price I know based on the interest shown.

 

[Grott]

Potentially 1 here weal.

 

[Midnight Brew]

1-2

 

[Dan Pratt]

after some research id take 2 and like everyone we need to see some idea of teh cost.

 

[sbowler]

1-2 for me too please

 

[homebrewnewb]

why not, EOI for x2 plz.

 

[Dan Pratt]

approx running tally is 30

which thread adapter will be need?

 

[wide eyed and legless]

No its about 50 all up, the thread on those is 1/4 NPT I made up a spunding valve manifold in high pressure plastic pipe thinking at the time it would be a good idea. In reality it cannot work unless all beers to be fermented start at the same time.
But still a good idea to make one up to control the venting of one vessel.

I went and bought a 1/4 NPT tap, being I was only using it on plastic no damage to the tap cleaned it up and took it back saying I had ****** up it was a 1/4 BSP tap and I already have one so got my money back

 

[yochris77]

Interested in 1 maybe. Thanks.

 

[akx]

In reality it cannot work unless all beers to be fermented start at the same time.

What about non-return (one-way) valves on each gas line into your manifold?

 

[wide eyed and legless]

I had the same thought and tried that in between the primary and secondary before it went into the manifold but the pressure just keeps pushing through so its equal pressure throughout.

 

[Fro-Daddy]

These are <$50 on eBay delivered, but I assume you will still need an adaptor for the fermentasaurus?

 

[wide eyed and legless]

Yes an adapter is needed NPT to BSP

 

[markp]

Yes an adapter is needed NPT to BSP

I’d question the need for an adaptor, I’ve screwed one of these directly into a bsp brass female tee piece with no issues. If we were talking high pressure then an adaptor would be needed but at 30 psi max no issues.

 

[Dan Pratt]

These are <$50 on eBay delivered, but I assume you will still need an adaptor for the fermentasaurus?

They are less than $12US on Amazon

 

[Digga]

They are less than $12US on Amazon

I found it really dear to
A- Find a seller that would ship to Australia, and
B- Get a single shipped for a reasonable price.

But yes this component was cheap, hence interest is there. Will be a great upgrade for the dodgy KK valve!

 

[Fro-Daddy]

I think my partner has a shipito account, perhaps we can utilize that and get a bunch from the US for cheap?
On Amazon it's US$11.14, but comes to AU$48 posted, pretty much the same as eBay Australia.
Or, try convince KegLand to stock them?