Thanks for the positive feedback. As a relative novice brewer, I'm always looking to improve things. If anyone could help with where the cloudiness comes from and I what I can do to remove it, it would be appreciated.
for the case swap I halved the roast malt and doubled the CaraRed.
Hey sappas, you made a decent beer mate, mine had marginal haze/cloudyness so id say it may have been yeast in suspension (i had yours in the fridge for 3 days). Time and chilling for extended peripods helps with this. if its bottle conditioned, not much you can do about having yeast in there unfortunatly unless you filter to a secondary fermenter.
As for the colour. Just a little tip/hint. the specturm of colour for crystals and roasts are different to 'the eye' per SRM. see below
<= 10 SRM
Crystal - Light Orange/honey to Copper
Roast - Tan
<= 20SRM
Crystal - Deep Copper - Red
Roast - Red - Brown
<= 30SRM
Crystal - mahogany
Roast - Black
Basically you want to balance the crystals and the roasts to give you the correct colour and the correct palate profile. for irish reds its 9 - 18 SRM. I'd be shooting for around 16-17 SRM to get a middle of the roasd deep copper/red. if you use all crystals, the beer will be too sweet, too much roast and its too 'roasty' which will throw it out of balance. I'd go for around a 40-60SRM cyrstal, or a trade off b/w two crystals e.g. 1/2 each addition of 10-20SRM and a 80-120SRM crystal. balance this with 1 part roast barley to your 2 parts of crystal. Use these additons until you get the colour into that srm and you are probably on the money. if it was just crystals, it would probably still look orange-copper, if it was just roast it will look red to brown (but it would be more like a scottich than an irish if there was no crystal.) I'd say the colour for yours was close to being spot on.. a little too dark IMO. but the crystal was good! its obviously a tried and true recipe, theres no need to re-invent the wheel i suppose, just modify it to suit your needs.
here is an exmple of a recipe i just whipped up to explain the above (i hope i made sense).
cheers! :icon_cheers:
Irish Red
Irish Red Ale
Type: All Grain
Date: 12/07/2009
Batch Size: 23.00 L
Brewer: Braden
Boil Size: 30.90 L Asst Brewer:
Boil Time: 60 min Equipment: My Brew Pot (40L) and Frosty Cooler (38L)
Brewhouse Efficiency: 68.0
Ingredients
Amount Item Type % or IBU
5.00 kg Pale Malt, Maris Otter (3.0 SRM) Grain 91.7 %
0.15 kg Carared (20.0 SRM) Grain 2.8 %
0.15 kg Crystal, Dark (Joe White) (86.7 SRM) Grain 2.8 %
0.15 kg Roasted Barley (Joe White) (412.9 SRM) Grain 2.8 %
35.00 gm Goldings, East Kent [5.00%] (60 min) (First Wort Hop) Hops 21.5 IBU
1 Pkgs London ESB Ale (Wyeast Labs #1968) Yeast-Ale
Beer Profile
Est Original Gravity: 1.051 SG
Est Final Gravity: 1.015 SG
Estimated Alcohol by Vol: 4.6 %
Bitterness: 21.5 IBU
Est Color: 16.7 SRM
Mash Profile
Name Description Step Temp Step Time
Mash In Add 14.20 L of water at 72.4 C 66.0 C 60 min
Mash Out Add 7.95 L of water at 95.1 C 75.6 C 10 min