The Brauduino (Matho’s Controller) Buy thread

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
1. Lael (x2)
2. natdene
3. shaodw
4. gap
5. kingy
6. barneey
7. ArnieW
8. Putrino
9. Mitch_76
10. tateg
11. LiquidCurrency
12. rafinus
13. crazyhorse
14. marksy (x 2)
15. JB
16. Neo__04
17. Masters Brewery
18. Cervante
19. Cervantes
20. sipahono
21. BobCharlie
22. jubilakka
23. CoxR
24. Capnk
25. breakbeer
26. lael
27. marksy
28. micbrew
29. Screamadelica
30. Pats
31. claypot
32. redlegger
33. pklakeside
34. lynchman
35. Bigbern
36. real_beer
37. gus the bus
38. Shaunous
39. jonasbegood
40. havebeer
41.Tassiehopper
42. jonasbegood
43. Misterwilson
44. jonnir
45. parktho
46. MrDave
47. Brutusb
48. Luisdepaula2001
49. tommy160
50. bigmacthepunker
51. nainsook
52. nainsook
53. moffatl
54. glen
55. kiwisika
56. sluggerdog
57. smokomark
58. SBOB
59. Marc280
60. Dug
61. rhart00
62. kezza (x2)
63. MitchD
64. camelbak28
65. 620rossco
66. Nick R
67. Cavemanbrew
68. Seemore
69. Eucyblues
70. Wort
71. Lluisdomene
72. Red Rocket
73.
74.
75.
76.
77.
78.
79.
80.
 
Lael,

I'm going to be using the controller with an existing urn, and I wasn't planning on changing the wiring/plug (standard 3 pin aussie plug).
So i'm wondering about the neutrik connectors.

Will the kit come with a socket and plug (male + female) ?
Have you seen a neutrik male to australian socket adapter anywhere?
 
CapnK said:
Lael,

I'm going to be using the controller with an existing urn, and I wasn't planning on changing the wiring/plug (standard 3 pin aussie plug).
So i'm wondering about the neutrik connectors.

Will the kit come with a socket and plug (male + female) ?
Have you seen a neutrik male to australian socket adapter anywhere?
Good question CapnK,

I haven't. But, if it is a standard urn, you can just buy a clipsal power lead from a hardware store / similar wire the neutrik to that and plug the urn cord into that. Will that work for you? (ie - make an adapter the length you want by wiring it up).
 
That's what I was planning to do, on the assumption the kit contains both the socket and a plug.
 
Oh yeah, it contains sockets and plugs for all the power in and out connections.
 
JB said:
1. Lael (x2)
2. natdene
3. shaodw
4. gap
5. kingy
6. barneey
7. ArnieW
8. Putrino
9. Mitch_76
10. tateg
11. LiquidCurrency
12. rafinus
13. crazyhorse
14. marksy (x 2)
15. JB
16. Neo__04
17. Masters Brewery
18. Cervante
19. Cervantes
20. sipahono
21. BobCharlie
22. jubilakka
23. CoxR
24. Capnk
25. breakbeer
26. lael
27. marksy
28. micbrew
29. Screamadelica
30. Pats
31. claypot
32. redlegger
33. pklakeside
34. lynchman
35. Bigbern
36. real_beer
37. gus the bus
38. Shaunous
39. jonasbegood
40. havebeer
41.Tassiehopper
42. jonasbegood
43. Misterwilson
44. jonnir
45. parktho
46. MrDave
47. Brutusb
48. Luisdepaula2001
49. tommy160
50. bigmacthepunker
51. nainsook
52. nainsook
53. moffatl
54. glen
55. kiwisika
56. sluggerdog
57. smokomark
58. SBOB
59. Marc280
60. Dug
61. rhart00
62. kezza (x2)
63. MitchD
64. camelbak28
65. 620rossco
66. Nick R
67. Cavemanbrew
68. Seemore
69. Eucyblues
70. Wort
71. Lluisdomene
72. Red Rocket
73.Seamad
74.
75.
76.
77.
78.
79.
80.
Why not start another project
 
Sorry Lael, im having to opt out of this buy. I was number 30

Pat
JB said:
1. Lael (x2)
2. natdene
3. shaodw
4. gap
5. kingy
6. barneey
7. ArnieW
8. Putrino
9. Mitch_76
10. tateg
11. LiquidCurrency
12. rafinus
13. crazyhorse
14. marksy (x 2)
15. JB
16. Neo__04
17. Masters Brewery
18. Cervante
19. Cervantes
20. sipahono
21. BobCharlie
22. jubilakka
23. CoxR
24. Capnk
25. breakbeer
26. lael
27. marksy
28. micbrew
29. Screamadelica
30. pats
31. claypot
32. redlegger
33. pklakeside
34. lynchman
35. Bigbern
36. real_beer
37. gus the bus
38. Shaunous
39. jonasbegood
40. havebeer
41.Tassiehopper
42. jonasbegood
43. Misterwilson
44. jonnir
45. parktho
46. MrDave
47. Brutusb
48. Luisdepaula2001
49. tommy160
50. bigmacthepunker
51. nainsook
52. nainsook
53. moffatl
54. glen
55. kiwisika
56. sluggerdog
57. smokomark
58. SBOB
59. Marc280
60. Dug
61. rhart00
62. kezza (x2)
63. MitchD
64. camelbak28
65. 620rossco
66. Nick R
67. Cavemanbrew
68. Seemore
69. Eucyblues
70. Wort
71. Lluisdomene
72. Red Rocket
73.
74.
75.
76.
77.
78.
79.
80.
 
JB, on 14 Sept 2014 - 9:16 PM, said:
JB said:
1. Lael (x2)
2. natdene
3. shaodw
4. gap
5. kingy
6. barneey
7. ArnieW
8. Putrino
9. Mitch_76
10. tateg
11. LiquidCurrency
12. rafinus
13. crazyhorse
14. marksy (x 2)
15. JB
16. Neo__04
17. Masters Brewery
18. Cervante
19. Cervantes
20. sipahono
21. BobCharlie
22. jubilakka
23. CoxR
24. Capnk
25. breakbeer
26. lael
27. marksy
28. micbrew
29. Screamadelica
30. pats
31. claypot
32. redlegger
33. pklakeside
34. lynchman
35. Bigbern
36. real_beer
37. gus the bus
38. Shaunous
39. jonasbegood
40. havebeer
41.Tassiehopper
42. jonasbegood
43. Misterwilson
44. jonnir
45. parktho
46. MrDave
47. Brutusb
48. Luisdepaula2001
49. tommy160
50. bigmacthepunker
51. nainsook
52. nainsook
53. moffatl
54. glen
55. kiwisika
56. sluggerdog
57. smokomark
58. SBOB
59. Marc280
60. Dug
61. rhart00
62. kezza (x3)
63. MitchD
64. camelbak28
65. 620rossco
66. Nick R
67. Cavemanbrew
68. Seemore
69. Eucyblues
70. Wort
71. Lluisdomene
72. Red Rocket
73.
74.
75.
76.
77.
78.
79.
80.
just up my order to 3
 
1. Lael (x2)
2. natdene
3. shaodw
4. gap
5. kingy
6. barneey
7. ArnieW
8. Putrino
9. Mitch_76
10. tateg
11. LiquidCurrency
12. rafinus
13. crazyhorse
14. marksy (x 2)
15. JB
16. Neo__04
17. Masters Brewery
18. Cervante
19. Cervantes
20. sipahono
21. BobCharlie
22. jubilakka
23. CoxR
24. Capnk
25. breakbeer
26. lael
27. marksy
28. micbrew
29. Screamadelica
30. pats
31. claypot
32. redlegger
33. pklakeside
34. lynchman
35. Bigbern
36. real_beer
37. gus the bus
38. Shaunous
39. jonasbegood
40. havebeer
41.Tassiehopper
42. jonasbegood
43. Misterwilson
44. jonnir
45. parktho
46. MrDave
47. Brutusb
48. Luisdepaula2001
49. tommy160
50. bigmacthepunker
51. nainsook
52. nainsook
53. moffatl
54. glen
55. kiwisika
56. sluggerdog
57. smokomark
58. SBOB
59. Marc280
60. Dug
61. rhart00
62. kezza (x3)
63. MitchD
64. camelbak28
65. 620rossco
66. Nick R
67. Cavemanbrew
68. Seemore
69. Eucyblues
70. Wort
71. Lluisdomene
72. Red Rocket
73. Seamad
74.
75.
76.
77.
78.
79.
80.


Thanks for taking my name out Pats
 
Sweet, I would love one!!!

1. Lael (x2)
2. natdene
3. shaodw
4. gap
5. kingy
6. barneey
7. ArnieW
8. Putrino
9. Mitch_76
10. tateg
11. LiquidCurrency
12. rafinus
13. crazyhorse
14. marksy (x 2)
15. JB
16. Neo__04
17. Masters Brewery
18. Cervante
19. Cervantes
20. sipahono
21. BobCharlie
22. jubilakka
23. CoxR
24. Capnk
25. breakbeer
26. lael
27. marksy
28. micbrew
29. Screamadelica
30. pats
31. claypot
32. redlegger
33. pklakeside
34. lynchman
35. Bigbern
36. real_beer
37. gus the bus
38. Shaunous
39. jonasbegood
40. havebeer
41.Tassiehopper
42. jonasbegood
43. Misterwilson
44. jonnir
45. parktho
46. MrDave
47. Brutusb
48. Luisdepaula2001
49. tommy160
50. bigmacthepunker
51. nainsook
52. nainsook
53. moffatl
54. glen
55. kiwisika
56. sluggerdog
57. smokomark
58. SBOB
59. Marc280
60. Dug
61. rhart00
62. kezza (x3)
63. MitchD
64. camelbak28
65. 620rossco
66. Nick R
67. Cavemanbrew
68. Seemore
69. Eucyblues
70. Wort
71. Lluisdomene
72. Red Rocket
73. Seamad
74. captinsmash
75.
76.
77.
78.
79.
80.
 
Quick Update - the enclosure people are dragging their feet. However! the PCB is somewhere on the way over here. I'll post pics once I've tested it.

What I *have* received is part of the 'no solder' solution - custom cables I've had made for the buttons! Woohoo!
I wasn't sure if it was possible, but I"m confident now the kit will be entirely solderless. Woohoo! The LEDs will also be on PCB terminals, I'm getting them custom made into Dupont female connectors (same as the other end of the custom cables) which means you can swap them out for some other solution if you want to. I'll post photos to show you when I receive the PCB.

(Edit: I've even gotten the cables color coded - red for heat, green for pump and white for buttons :) )

Here's some pics:

CustomButtonCables1.jpg

Note the minor problem - if the buttons are where they are currently located the spade connector for the button gets in the way of the pcb terminal connectors.
CustomButtonCables5.jpg

Solution 1: bend the spade connectors gently
CustomButtonCables2.jpg

Solution 2: I can move the buttons down, which will give more space, but they will be further from the LCD (this is an example from the original board. I'll take more photos when I get the real PCB.
CustomButtonCables4.jpg


Any thoughts?
 
Lael

I am keenly flowing this and am tempted to jump on the list.

Given that this thread is now at 35 pages its hard to find a succinct answer for what the controller is/does.

After a bit of foraging this appears to be a succinct post about what it is

And this one is explains what the current list is for - I wonder how many people read to post title and think they are signing up for a $30 deal?

Hope this helps anyone jumping into this thread now and save them reading all 35 odd pages

Just a bit of feedback that might make it clearer - perhaps you could get a mod to change the title or split this from you post #442 onwards into a separate thread.
 
Hi Paul,

I don't think anyone has put their name down without reading back to figure out what it is, and it has been mentioned a few times. I was looking at the title when I posted this morning and wondered how confusing it is for new people. I'll chat to a mod about it.

Just be aware that the $145 was wrong. That was before I'd remembered to include the costs for the heatsink, new sockets, temp probe. Once I've got final pricing on everything (pretty much have it all just waiting on the box and a quote on the new PCB design) I'll update the price. I've been asked for a ballpark, and the answer is - I'll give you the right price once I have it all. It will be more than the 145+ shipping. (I think a $15 satchel from AusPost will handle it).

Cheers,

Lael
 
Hi Lael, do you have an idea of the size and weight of what each parcel would be, I maybe able to source a better rate from Post for you?
 
Another vote for moving the buttons lower.

Moving them away from from the LCD will also probably make it easier to read. Thinking that if the buttons are back lit then glare/reflection from the buttons could make the LCD hard to read if too close.

Looking great.
 
Back
Top