Sweet ITC-1000 Price! 23% off (AUD16.93) for Inkbird Dual Stage IT

[inkbird]

LIST FOR ITC-1000:
http://www.ebay.com.au/itm/Inkbird-Digital-Temperature-Controller-ITC-1000-220V-Thermostat-Temp-Measurement-/221408484281?ssPageName=STRK:MESE:IT

Product Features

Fahrenheit and Celsius Display Can Be Choose
Alarm When Temperature Exceeds the Limit or When Sensor Error
2 Relays, Switch Between Cooling and Heating Modes
Control the Temperature by Setting the Temperature Set Value and the Difference Value
Temperature Calibrating, Refrigerating control output delay protection





ITC-1000 220V



Specification and Size:
1.Front panel size75(L)x34.5(W)mm;
2.Mounting size:71(L)x29(W)mm;
3.Product size75(L)x34.5(W)x85(D)mm;
4.sensor length: 2m include the probe.

Detailed Product Description
Measure range:-50~+99°C
Mounting size:71*29mm
Auto switch between refrigerating and heating
Retrun difference value
All-purpose Temperature Controller 220V ITC-1000:

Technical Parameters:
1. Temperature measuring range: -50~99 Degree C;
2. Resolution: 0.1 °C; 3. Accuracy: ±1 °C
(-50~70°C);
4. Sensor error delay: 1 minute
5. Power supply: 220VAC±10%, 50/60Hz;
6. Power consumption: less than 3W;
7. Sensor: NTC sensor (1PC);
8. Relay contact capacity: Cool 10A/250VAC;Heat 10A/250VAC;
9. Ambient temperature: 0~60°C;
10.Storage temperature: -30~75°C;
11.Relative humidity: 20%~85% (No condensate).

Pacakge:

• 1 x Inkbird ITC-1000 220V Temperature Controller
• 1 x Mounting Bracket
• 1 x Manual

Thanks for looking!
Inkbird provides the high quality, safe and preferential price temperature controllers.

Welcome to our ebay store: http://stores.ebay.com.au/Inbird-AU

 

[Benn]

You win, I just ordered one.

 

[doctr-dan]

I'd get 2 if I knew how to wire them up

 

[AJS2154]

Doc, if you would like me to send you a very simple, self explanatory wiring diagram, send me a PM. Temperature control is the best investment / improvement you can make to your brewing.....and for the money these things are ridiculously cheap.

 

[AJS2154]

OK Inkbird, I was just on your website.

I have a STC1000 which has worked very reliably for me, but it always pays to have a spare. My question is this: does this model work like the SCT1000 in that if the temperature drops below a set point it switches on one relay that is connected to say a heater pad, and if the temperature exceeds another higher set point it switches another relay to allow my refrigerator to operate? I need to be able to use both set points at any stage.

If you could clear that up I will be in.

Thanks, Anthony

 

[inkbird]

You win, I just ordered one.

Thank you .

 

[inkbird]

I'd get 2 if I knew how to wire them up

Hi friend,
Here is the link for the Instructions of ITC-1000:

http://ink-bird.com/asset/file/ITC-100_%20Manual_%20V1.0_6.30.pdf

Hope it can help you.
Thank you.
If any questions,please feel free to contact me .
Regards,
Inkbird

 

[inkbird]

OK Inkbird, I was just on your website.

I have a STC1000 which has worked very reliably for me, but it always pays to have a spare. My question is this: does this model work like the SCT1000 in that if the temperature drops below a set point it switches on one relay that is connected to say a heater pad, and if the temperature exceeds another higher set point it switches another relay to allow my refrigerator to operate? I need to be able to use both set points at any stage.

If you could clear that up I will be in.

Thanks, Anthony

Hi friend ,
Thank you for your questions,
ITC-1000 is a dual stage controller.
Sure you can use both set pionts at any stage.
Regards,
Inkbird

 

[BradG]

Hi friend,
Here is the link for the Instructions of ITC-1000:

http://ink-bird.com/asset/file/ITC-100_%20Manual_%20V1.0_6.30.pdf

Hope it can help you.
Thank you.
If any questions,please feel free to contact me .
Regards,
Inkbird

I don't believe those instructions are for the unit in the picture at the beginning of the thread

 

[inkbird]

I don't believe those instructions are for the unit in the picture at the beginning of the thread

Hi friend ,
Thanks for reminding
I made a mistake,sorry~
Here the instructions for ITC-1000
http://www.ink-bird.com/asset/file/ITC-1000%20Manual%20-%20V1.3.pdf
Thank you

 

[inkbird]

I'd get 2 if I knew how to wire them up

The instructions for ITC-1000
http://www.ink-bird....nual - V1.3.pdf
Thank you

 

[AJS2154]

Yeap.....I bought one too. Just in case!

 

[BradG]

Same.
Perhaps there flashable to make the profile controller?

 

[Benn]

Ink Bird should just flash them at the factory and for a few extra dollars sell them to people like me who have an Extremely short fuse when it comes to computers.

 

[nic0]

Great, i have been looking at these for a while and i have also ordered one!!!

 

[inkbird]

Yeap.....I bought one too. Just in case!

Thank you

 

[inkbird]

Same.
Perhaps there flashable to make the profile controller?

Hi friend,
I'm sorry but our products do not support this.
Thank you.

 

[inkbird]

Great, i have been looking at these for a while and i have also ordered one!!!

Thank you

 

[barls]

threads merged

 

[inkbird]

threads merged

Thank you so much