• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

Single vessel setup

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dbaker1202

Member
Joined
9/7/14
Messages
22
Reaction score
6
Hi all im selling my single vessel set up.
Contents are:
1 30litre pure distilling urn
1 robobrew malt pipe
1 keg king mkll magnetic drive pump with stainless steel head
1 wort chiller (stainless coil)
1 stc1000 temp controller to control mash temps.

Asking price $300.
I am located in wollongong area.
Feel free to contact me on 0403947639 or here for any further queries.

Thanks,
Dan.
 

Attachments

  • 1499737453656.jpg
    1499737453656.jpg
    119 KB · Views: 273
  • 1499737463276.jpg
    1499737463276.jpg
    143.6 KB · Views: 252
  • 1499737479286.jpg
    1499737479286.jpg
    104.3 KB · Views: 248
  • 1499737487816.jpg
    1499737487816.jpg
    102 KB · Views: 252
  • 1499737498886.jpg
    1499737498886.jpg
    164.4 KB · Views: 265
I usually mash in 5kg grain in 22 litres. Sparge with around 7 litres and get upto 25 pre boil. Boil off around 2 litres and lose around 2 to trub. End up with 21ish litres at 1.050 gravity. I have used upto 6.3 kg grain and also just topped the 21l up with water to get 23-24 litre batches
 
Bump. Price drop $250. Also i work in sydney (redfern) so pick up could be in thst area also
 

Latest posts

Back
Top