Ready Made Fridge Controller Enclosures

[SpillsMostOfIt]

While searching for a maintenance manual for my fridge, I found this:

http://www.stokesap.com.au/Content/templat...8&zoneid=11

It details IP65 rated enclosures for temperature controllers such as those that almost everyone seemed to buy on eBay (not the bigger ones from the Australian HB shops).

Might be of interest to people who don't own a Dremel.

If it's old news, I apologise.

I've never done business with these people.

 

[Rodolphe01]

I found that a stanley knife heated in a gas flame sliced through a jiffy bopx quite nicely. jiffy box cost about a nano-dollar from jaycar.

 

[felten]

A pilot hole and a hacksaw works quite well too.

 

[OLDS2006]

1.25ltr soft drink bottle, extension cord and heat gun work fine.